Best Truck Bed Hitch Extender

CURT 16055 Bent Plate 5th Wheel to Gooseneck Adapter Hitch, Fits Industry-Standard Rails, 25,000 lbs, 2-5/16-Inch Ball

  • MAXIMUM FUNCTIONALITY. This unique gooseneck hitch is a 5th wheel to gooseneck adapter. It is designed to drop into existing 5th wheel base rails in your truck bed and enable gooseneck towing.
  • 5TH WHEEL FIT. For versatile application, this gooseneck 5th wheel hitch fits any industry-standard 5th wheel rails. It provides a standard 2-5/16-inch gooseneck ball for ready coupling of a gooseneck trailer.
  • DEPENDABLE TOWING. This 5th wheel gooseneck hitch is tested and rated to tow 25,000 lbs. gross trailer weight and 6,250 lbs. vertical load (limited to lowest-rated towing component).
  • CORROSION-RESISTANT. For reliable weather resistance, this gooseneck hitch adapter is shielded in a highly durable carbide powder coat finish. This tough finish easily outlasts exposure to rain, snow, dirt and other corrosive elements.
  • EASY TO INSTALL. This 5th wheel to gooseneck hitch adapter easily drops into the 5th wheel hitch rails and is secured with 4 included hitch pins. It can be positioned over the truck axle or flipped and set for 3 inches of rearward displacement.
Check Stock

CURT 45909 Folding Hitch Step for Adjustable Channel Mount 17.1 x 8.5 x 2.7 inches

  • CONVENIENT. This hitch step provides a useful step up on your vehicle wherever and whenever you need it! Mounted on a CURT channel mount, it offers a 16-inch wide stepping surface for easier access to your truck bed or under the hood.
  • CHANNEL MOUNT. This versatile receiver hitch step mounts on virtually any 2-inch or 2-1/2-inch trailer hitch receiver. All you need is a CURT channel mount. This package includes the step only.
  • ADJUSTABLE. This truck hitch step is highly adjustable when mounted on a CURT channel mount, able to be raised or lowered as needed to accommodate your own specific vehicle and needs.
  • HIGH-STRENGTH. This tow hitch step provides dependable strength, featuring cast steel construction. The all-steel construction allows it to support up to 500 lbs.
  • CORROSION-RESISTANT. To long outlast the outdoor elements, this receiver step is covered in a highly durable carbide black powder coat finish, resisting rust, chipping and UV damage.
Check Stock

X-Alter Truck Bed Extender for 2003-2021 Dodge Ram 1500 2500 3500 Pickup Trucks

  • This truck bed extender fit 2003 up to present Dodge Ram 1500 2500 3500 (Exclude Rambox).
  • It is very light (net weight 13.8 pounds), once assembled, it is very strong, easy to remove (pull out two pins).
  • The tailgate extenders for trucks can be flipped in and out, used to increase the use space and storing small items.
  • The body of this bed extender for trucks is assembled by black powder-coated 6063-T6 aluminum alloy tube and weather-resistant PA6 nylon column.
  • A total of 4 or 6 holes need to be drilled on both sides of the Dodge Ram truck bed, detailed installation instructions are provided, and a 2-year.
Check Stock

ECOTRIC Universal Gooseneck Hitch Ball Adapter Plate for Standard 5th Fifth Wheel Rails Pickup Truck Bed Tow 25,000 lbs 2-5/16-Inch Hitch Ball

  • 【Maximum Functionality】 This unique gooseneck hitch allows you to pull a Gooseneck trailer using the 5th wheel "Rails" in the bed of your truck. It is designed to drop into existing 5th wheel base rails in your truck bed and enable gooseneck towing. It allows you to maximize the functionality of your truck for towing both types of heavy-duty trailers..
  • 【Feature】 2-5/16” heat treated ball. Ball is offset 2” to accommodate 6 & 8 ft. truck beds. Weight Carrying:6,250 lbs. (TW/GTW). Weight Distributing: 25,000 lbs. (TW/GTW) Center of the ball is 10-1/2" from one end of the plate and 14-1/2" from the other. Curve in plate provides a 2" rise..
  • 【Heavy Duty】 For reliable weather resistance, this gooseneck hitch adapter is shielded in a durable black powder coat. This tough finish easily outlasts exposure to rain, snow, dirt ..
  • 【Easy Installation】 Easy installation and removal allows for full access to truck bed. Utilizes same base rails (#30035) as our fifth wheel hitches. Raised safety chain locations all for easy trailer connection. Includes 2-5/16 ball and 4 pins for installation..
  • 【Mounting Tab Measurements】 Tab measures 15/32" x 1-1/2". Distance on center between the tabs, left to right: 10". Distance between the tabs front to b....
Check Stock

Shocker Gooseneck Surge Air Hitch & Shift Lock Coupler for 2-5/16\ Ball, 3-15/16\ Square Top Crank 30K Coupler

  • ... tongue weight: Available with 30k dual latching Shift Lock gooseneck coupler. Fits 2-5/16? gooseneck hitch balls: & has 3 height adjustment holes. (Standard coupler extends 3 inches forward from your factory coupler or choose 9 inch offset extension coupler for short bed pickups).
  • Air Ride Technology: Protects your truck, gooseneck trailer and the contents with a smoother, safer tow. Heavy loads, just add air. The cure for choppy, bouncy, buckled, rough & busted up roads. No more booms, bangs and jerks when towing with your gooseneck..
  • Includes complete Shocker Gooseneck Surge air hitch with built in airbag, replacement inner tube stem & 30,000 lb Shift Lock gooseneck coupler for 2-5/16" ball (Make SURE You Pick Correct Inner Stem Size & Pin Type) Made in the USA by Shocker Hitch Arthur, North Dakota. (If you have a short bed truck, check out our Shocker goose air with 9 inch extension coupler).
Check Stock

Moab Cargo Tailgate Net for Pickup Truck Bed Extender, Compatible with Ford Titan Tundra Ram Silverado Sierra

  • 1.Cargo tailgate net is installed on truck bed extender. It fits Ford Titan Tundra Ram Silverado Sierra Tailgate Extenders.
  • 2.It is made by using rubber to seal the edges of the stainless steel mesh and will not rust.
  • 3.Our Cargo tailgate netting is to prevent small items from leaking out of the truck bed extender gap.
  • 4.The installation takes about an hour. We provide detailed installation instructions..
Check Stock

Apex Hydraulic Hitch-Mount Pickup Truck 1,000 lb Jib Crane

  • Load generators, engines, compressors and small equipment into your truck or trailer bed.
  • 360 Degree rotating hydraulic hitch-mounted lift hoist with locking pins.
  • load cargo from driver or passenger side of pickup truck.
  • Includes handle-operated lever, steel hook and chain.
  • works with 2" Class III or IV Hitch receivers.
  • 4 ft. Boom with adjustable height support legs.
  • Heavy duty reinforced steel construction.
Check Stock

KAIRAY Hitch Step Universal fit 2 Inch Rear Hitch Receivers for Truck Car SUV Vehicles with Hitch Pin Anti Slip and Rust

  • PREMIUM MATERIAL: This hitch step is made of heavy duty steel with matte light texture coating for long-lasting corrosion resistance. It offers all-weather protection for your car's bumper..
  • UPGRADED DESIGN: Towing hitch step provides five different positions for flexible use, steel step pad area with shark jaws shape design effective anti-skid.Overall Dimensions: 14.8"(L)x 6.9"(W)x1.6"(H).The hitch step can bear a weight of 300 pounds..
  • APPLICABLE SCOPE: Hitch receiver step can be mounted to any vehicle with a standard 2" hitch receivers.To truck beds, roof racks and SUV interiors, Once secured, the hitch step provides access to your truck bed, roof racks, and in the case of an SUV, the rear cargo area..
  • EASY INSTALLATION: Use of a plug-and-play helps with quick, effortless installation. Simply slide it into the receiver, then into the hook and tighten it, no drilling or cutting needed.Includes hitch pin and clip which can be used to prevent slipping down..
  • NOTE & CLIENT SUPPORT: The non-slip design of the shark jaws shape is used on the surface of the hitch step, please be careful to touch it.30 DAYS money back and 1 YEAR warranty, feel free to contact us for any issue..
Check Stock

CLAMBER Hitch Step for Pickup Truck & Trailer with 2 Inch Hitch Receiver, E-Coat & Black Texture Powder Coat Surface Anti-Rust, Anti-Slip & Water-Proof, with U-Bolt Stabilizer, Hitch Lock & Reflector

  • Notice - CLAMBER Pickup Truck Hitch Step fits 2 inch towing hitch receiver. This extra step will make it easier entry/exit truck bed and effectively protect your car paint, rear bumper and truck body from minor collision or rear-end collision..
  • Material - Enhanced matel load bearing beam with down flanging design build a high-strength structure and maximize the weight capacity to 450lbs. E-coat & texture powder coat make it skid-resistant, rust-resistant, water-proof & weather-proof..
  • Design - DIY color: Removable and paintable red sheet, keep it, remove it or DIY your own color. Back reflector make your vehicle easier to be noticed. 8" insert part with 3 optional pin holes for different receivers. U-Bolt will steady the step against wobble..
  • Easy Un/Installation - Insert the hitch step, tighten the hitch lock and U-bolt stabilizer. The process would take a few minutes but will complete by oneself. Anti-theft hitch lock presented. Remember to keep the key..
  • Guarantee & Service - CLAMBER provides 2 year warranty for any defects of manufacture .( In some cases, the hitch step will interfere with backup sensor).
Check Stock

TOPTOW Hitch Extender Fits for 2 inch Receiver 8.5 inch Extension Length Anti-Rattle Bolt with Hitch Pin Kit and Anti Rattle Stabilizer

  • ★Please check the product dimension before purchasing this part. Extender length (hole to hole): 8-1/2". Shank size: 2". Extender receiver size: 2"....
  • ANTI-RATTLE DEVICE: With seperate anti-rattle hitch tightener and bolt on 2 inch receiver, it can eliminate the hitch wobble at the junction of your....
  • HIGH STRENGTH: This 2 inch receiver tube is rated to tow up to 3500/350 lbs GTW/TW.
  • Package: Comes with hitch extender, 5/8" Hitch Pin and Clip and Blue Anti Rattle Hitch Clamp.
  • Black Powder Coating Finish, Enhanced Rust and Corrosion Resistance.
Check Stock