ZRYYWAN RC Car 1/10 75CC Oil-Powered RC Crawler Truck, 4WD Two Speed Off Road Buggy Nitro Gas Power Remote Control Car 94166 Hobby Toys, 90KM/H Fast Petrol Engine Racing Car RC Vehicle
☀1/10 oil-driven flat sports car, using Zhongyang 16-stage engine (dual oil needle engine), all-metal hydraulic shock absorber, all-metal hydraulic shock absorber, chassis and second floor (CNC aluminum alloy parts), secondary mechanical type Automatic transmission, four-wheel drive, not easy to lose dog bones.
☀High-quality shock absorbers, equipped with professional-grade screw-type adjustable hydraulic shock absorbers, high-efficiency four-wheel disc brake system, high-density air filter sponge, 2.5 mm thick aluminum alloy chassis, all-wheel positioning independently adjustable.
☀The whole car uses ball bearings, rolling bearings, high-quality flat sports rubber tires, anti-skid and wear-resistant, this car is equipped with metal clutch transmission gear, metal middle differential gear, to ensure super-strength sports performance..
☀3-channel 2.4G remote control, full-scale control of the throttle, independent three-way receiver, and another one can be modified by yourself for upgrading.
☀This car is equipped with a 75cc large-capacity fuel tank, one tank of fuel can l....
Recajia Universal 6 Hole Flywheel Rotor Magneto Puller Tool with 5mm Diameter and 6mm Bolts
[No Oil Leakage] - The hydraulic puller is forged with high-quality steel and cast in one piece. There is NO need for sealing rings and NO oil leakage. And the hydraulic cylinder is thickened with a strong pressure resistance..
[3 or 2 Jaws Interchange] - 3 jaws / 2 jaws can be easily interchanged can be easily interchanged, and can also be used Horizontally or vertically, without site restrictions. It is flexible to operate and easy to replace..
[Complete Accessories] - This 3 in 1 bearing puller set integrates pump, tubing, and drawing machine, which includes: 1 x hydraulic cylinder, 1 x handle, 3 x jaws, 6 x pulling tabs, 6 x screws, 1 x spring thimble, 1 x pull ring, 1x portable thickened plastic box..
[Wide Applications] - The bearing separator is widely used in various places. Such as truck hub, brake drums, sprockets, rotors, car axles, wheel bearing, shaft and pulley disassembly.
railway vehicle, factory machinery and mining equipment maintenance, etc..
[One-year Warranty] - Within one year of purchase, if something goes wrong with the hydraulic puller, you can replace it for free..
Air Hydraulic Pump 10000 PSI 1/2 Gal Reservoir Single Acting Pullers Foot Pump with Trachea and Oil Pipe for Pumping Water Automobiles Industrial Chemical Petroleum Mining Pulling Post
【ALL-METAL STRUCTURE】This hydraulic foot pump is specially designed for industrial applications with all-metal structure. It has fully reliable components, all components are standard 3/8 inch NPT..
【FOOT PEDAL CONTROL】The hydraulic pump adopts a humanized pedal motion design, which is easy to control and operate, save time and effort and has strong power, pressure adjustable.Full of power, two-stage pressure relief, 1.5 times the speed of ordinary hydraulic pumps..
【OUTPUT PRESSURE】Air Treadle Foot Actuated maximum pressure: 10000 psi hydraulic pump and has a built-in safety overload pump power saver. Maximum input air pressure: 140PSI. Flow rate: 0.74-0.97 m3/MIN. Rated pressure: ≤ 70 Mpa..
【APPLICATION】Widely used in automobile manufacturing inspection and maintenance, engineering technology, aerospace, chemical, petroleum, mining and other industries to provide high-pressure power for hydraulic equipment..
【FAST OILING AND GOOD SEALING PERFORMANCE】Aerospace Grade Materials aluminum fuel tank capacity: 1.6L, hydraulic oil type: AW-32. The hydraulic pump is equipped with a high-pressure tubing. Oil outlet: 3/8 inch NPT, Air inlet: 1/4 inch NPT. The tubing adopts double-protected embedded steel wire and a thickened outer layer, whi....
Bonvoisin 30T Hydraulic Cylinder Jack Porta Power Ram 2\ Stroke Mini Single Acting Lifting Cylinders for Machinery Shipbuilding
Product Details: Our hydraulic pump is designed with a 12V DC motor (Power: 1.6-3.0kw) and a 10-quart reservoir. The max relief pressure on A port (SAE#6) is 3200 PSI, and on B port (SAE#6) is 1500 PSI.
the flow rate is 2 GPM, and it is a double-acting pump for both power up and power down..
Easy to Use: This 12V hydraulic power unit has been fully assembled in advance. The wiring is simple and comes with operating instructions. It includes a 15 ft remote control and two additional SAE#6 connectors are provided for replacement..
Reliable Quality: The dump trailer pump is made of sturdy metal.
thus, the oil tank is not easy to crack or be damaged. As a power unit, this is a perfect replacement pump for remote hydraulic systems. Equipped with a relief valve, it avoids overpressure, safer and reliable..
Rapid Start: With its powerful motor, this hydraulic electric pump is quick to start and quick to output oil.
it can provide strong power for hydraulic systems like dump trailers, dump beds and is able to complete lifting in a short time..
Wide Application: This power unit is widely used in stackers, small, and medium-sized lifting platforms. It is compatible with many dump trailers and movers and is a direct replacement for 12V DC remotely controlled hydrau....
STKUSA Stark Bead Breaker 10000PSI Hydraulic Bead Breaker for Tractor Truck Tire Bead Breaker with Hydraulic Metal Foot Pump and Air Hose, Hydraulic Bead Breaker
Versatile Application - The bead breaker and foot pump are great for all kinds of tires - ATV, Golf Cart, Bus, Truck, Agricultural, and even Back Hoe Tires.
Easy Operation - The pump adopts the user-friendly foot-actuated design for easy control and operation, time-saving and labor-saving with strong power.
Excellent Removing Tool - Our tire bead tool kit can perform greatly on the tires by loosening tire bead from the rim with leverage without removing the wheels.
Heavy Duty - Max Pressure 10,000psi (700bar).
Pressure Range: 40-150psi (2.8 to 10.3Bar) Our hydraulic bead breaker delivers 10,000 lbs. of force in seconds to break beads smoothly under hydraulic action.
Hydraulic Foot Pump - Our bead breaker tool kit comes with a 700bar air hydraulic foot pump, and one air hose is also included..
Mophorn Single Acting Hydraulic Pump 12V DC Hydraulic Power Unit 3.75 Gallon Dump Trailer Pump Steel Hydraulic Power Unit (Steel, 15 Quart/Single Acting)
Product Details: Our hydraulic pump is designed with a 12V DC motor (Power: 1.6-3kw) and a 15-quart reservoir. The max relief pressure is 3200 PSI.
it is a single-acting pump for power up and gravity down..
Easy to Use: This 12V hydraulic power unit has been fully assembled. The wiring is simple and comes with operating instructions. One additional SAE#6 connector and one 15 ft remote control are included in the package..
Reliable Quality: The dump trailer pump is made of sturdy metal.
thus, the oil tank is not easy to crack or be damaged. As a power unit, this is a perfect replacement pump for remote hydraulic systems. Equipped with an overflow valve, it automatically releases when overpressure, safer and reliable..
Rapid Start: With its powerful motor, this hydraulic electric pump is quick to start and quick to output oil.
it can provide strong power for hydraulic systems like dump trailers, dump beds and is able to complete lifting in a short time..
Wide Application: This power unit is widely used in stackers, small, and medium-sized lifting platforms. It is compatible with many....
