Best Truss Stand

E-Z UP Food Booth Sidewall Kit, Set of 4, Fits 10' x 10' Straight Leg Canopy, Includes 2 Roll-Up Serving Windows, Commercial Grade Mesh, Black

  • Includes: 1 mesh sidewall w/truss clips with 2 roll up serving windows.
  • Attaches to straight leg shelters/canopies, sold separately. Shelter/canopy frame and top NOT included.
  • Coordinating zippers to attach on each side to fit straight leg frames.
  • Tie hooks and clasp attachments for E-Z set up.
  • Meets CPAI-84 fire resistant requirements.
Check Stock

Pop Up Canopy Tent 10x10Ft,Heavy Duty Commercial Canopy Tent with Strong Truss Structure, Anti-UV Sun Instant Shelter for Flea Market Parties Garden Backyard,Black

  • ☀ Large Space - The canopy The 10 X 10 Ft space, A person up to 78 inches tall can stand under the canopy. It is perfectly suitable for commercial activities, parties and other big activities you want..
  • ☀ Full-Truss & Heavy-Duty - The heavy-duty canopy adopts a professional full-truss structure, thickened square legs and anti-rust coating, making the canopy heavier and more stable than others..
  • ☀ High-Quality Material - The Pop-up canopy is made of high-quality 300D polyester with a PU lining, which can withstand 99% of ultraviolet rays. And the heat-sealed seams provide good waterproofness, suitable for outdoor use..
  • ☀ Installation Tips - In order to make the tent more stable, please fill the sandbags during installation, fix them on the bottom of the main frame of the canopy tent, and fix the tent on the ground with nylon ropes and nails.As the canopy can withstand limited water, the backlog of rain water can easily crush the canopy. In heavy rain and wind, to protect the service life of the tent, please fold the tent and store it indoors when necessary..
  • ☀ Easy to Carry - The sun shelter coming with a roller carrying bag, reinforced base plate and heavy-duty zipper and rubber handle. You can easily carry the canopy to where you need it ....
Check Stock

ORTONYX Inguinal Groin Hernia Truss Support Belt - Double Beige

  • EFFECTIVE INGUINAL HERNIA SUPPORT: Recommended for bilateral inguinal hernia support before and after surgery to prevent the hernia from recurrence and protect the incision site. The truss can be used during a variety of sports activities, and for everyday optimal support..
  • COMFORT AND FREEDOM OF MOVEMENT: Flexible elastic material and the construction of the truss provide comfortable support without restricting movement..
  • SLIM DESIGN: Slimline design and the ease of on and off allow to wear the hernia truss for extended periods of time over briefs under regular clothes..
  • INNOVATIVE FEATURES FOR MAXIMIZED EFFECT: Elastic adjustable straps allow for a customized fit and controlled compression. Two silicon pads with soft lining exert localized pressure on the hernia and support weakened muscles of the groin..
  • INSTANT RELIEF, COMFORT AND RECURRENCE PREVENTION: The double inguinal hernia belt offers instant pain relief and ensures stable support for the hernia site, promoting the healing process in a faster and more comfortable way and preventing recurrence..
Check Stock

ORTONYX Inguinal Groin Hernia Truss Support Belt - Right Beige

  • EFFECTIVE INGUINAL HERNIA SUPPORT: Recommended for right side inguinal hernia support before and after surgery to prevent the hernia from recurrence and protect the incision site. The truss can be used during a variety of sports activities, and for everyday optimal support..
  • COMFORT AND FREEDOM OF MOVEMENT: Flexible elastic material and the construction of the truss provide comfortable support without restricting movement..
  • SLIM DESIGN: Slimline design and the ease of on and off allow to wear the hernia truss for extended periods of time over briefs under regular clothes..
  • INNOVATIVE FEATURES FOR MAXIMIZED EFFECT: Elastic adjustable straps allow for a customized fit and controlled compression. A silicon pad with soft lining exert localized pressure on the hernia and support weakened muscles of the groin..
  • INSTANT RELIEF, COMFORT AND RECURRENCE PREVENTION: The right side inguinal hernia belt offers instant pain relief and ensures stable support for the hernia site, promoting the healing process in a faster and more comfortable way and preventing recurrence..
Check Stock

Stainless Steel Lath Screws 8 x 3/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 3/4 0.75 in.

  • Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....
Check Stock

Stainless Steel Lath Screws, 8 x 1-5/8, Sharp Point Modified Truss Head Phillips Drive (Quantity: 100) Type 17 Cutting Point 305 (18-8) Stainless Steel, Length: 1-5/8 (1.625) in.

  • Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....
Check Stock

Stainless Steel Lath Screws 8 x 1-1/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 1-1/4 1.25 in.

  • Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....
Check Stock

for Academy Sports + Outdoors 10 ft x 10 ft One Push Straight Leg Canopy Side Truss Bars Replacement Parts

  • PLEASE MEASURE THE LENGTH OF YOUR TRUSS BAR BEFORE ORDERING!.
  • Prior to buying, please measure what replacement part you will need because there are many different styles and sizes of replacement parts that can differ from year, model, and size of canopy. Please refer to pictures to determine the exact measurements of the parts you are buying and make sure that is the part your canopy needs. If you have any questions or doubts, please message us..
  • Included: Metal - ONE ( X ) TRUSS Bar Set (Exactly as shown in picture) No other parts Included..
  • For Academy Sports + Outdoors 10 ft x 10 ft One Push Straight Leg Canopy or any brand have same dimensions and specification.
  • PLEASE NOTE: This truss does Not attach to the Middle. It attaches on the corners as shown in picture..
Check Stock

Titan Attachments 20 FT Economy Telescoping Hydraulic Skid Steer Truss Boom with 120-inch Reach

  • IDEAL FOR CONSTRUCTION COMPANIES: The hydraulic truss boom allows you to turn your skid steer into a mobile crane. Skid steers will enable you to move around your job site easier and fit into smaller areas than a fullsize crane..
  • 2INCH CYLINDER: The attachment is equipped with a massive hydraulic cylinder with a 2inches Bore and a 60inch stroke. We have also included the hydraulic hoses fitted with a male and female flatfaced coupler to connect the truss boom to your loader quickly..
  • HEAVYDUTY DESIGN: The Telescoping Skid Steer Truss Boom is hydraulically operated and constructed with 3 x 3inch, 5 mm thick structural steel. Allowing the boom to hold 500pounds when fully retracted and 180pounds when fully extended..
  • UNIVERSAL SKID STEER CONNECTION: Our superior design fits with almost all skid steers, loaders, and tractors such as the Ford 8n, 9n, Kubota, BX, or Kioti tractors. This kind of connection is known as SSQA, or Universal Skid steer style quick connect..
Check Stock

In Timber We Truss Funny T Shirt

  • Tee shirt featuring truss design of timber frame structural roof truss made of wood or lumber..
  • T-shirt gift for frame cutter, craftsmen timber framer, frame designer, architect, home construction worker and civil engineer..
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock