Best Truss Straps

StewMac Hot Rod Low Profile 2-Way Truss Rod, 4mm Allen Nut, 18' Overall Length

  • These strong, 2-way adjustable rods correct both upbow and backbow.
  • Our Hot Rod Low Profile 2-Way Truss Rod is great for thinner necks that need a shallow truss rod depth.
  • The low profile means you don't have to remove risky amounts of wood to install this two-way rod, which means there's less chance of cutting into your truss rod channel when shaping a thin neck.
  • This ingenious dual-rod design fits a straight 1/4"-wide x 3/8"-deep channel and adjusts via a smooth-turning 4mm (5/32") Allen nut.
  • 18" overall length for electric guitar and banjo necks.
Check Stock

DZS ELEC 2pcs Martin Folk Guitar Allen Wrench Tool 4mm / 5mm Truss Rod Wrench for Martin Acoustic Guitar Truss Rod Adjustment

  • Package includes: 1 x 4mm Truss Rod Wrench + 1 x 5mm Truss Rod Wrench.
  • The product is made of metal, durable and highly wear-resistant.
  • L-shaped truss rod, easy to insert into the sound hole and adjust the neck.
  • L-shaped adjusting wrench can adjust the guitar neck straightness. It is suitable for all models of Martin Martin Martin and some brands of folk classical wooden guitars.
Check Stock

New Comfortable Hernia Belt for Men - Improved Design Inguinal Truss - Abdominal Binder Brace with Adjustable Self-stick-on Bands ( Large)

  • New and improved design with side-on (around buttock ) straps.
  • adjustable tightness for controlled compression and customized pressure.
  • belt can be adjusted according to the position or on the appropriate spot of the hernia – right or left.
  • Hernia Truss with comfortable anatomical pads for gradual and gentle pressure- specially designed to provide relief from ingrained hernia pain.
  • helps in its treatment, enhanced effectiveness and far better than hernia briefs – proper ventilation..
  • Pads made from special grade Ethafoam, light weight and soft yet with appropriate hardness. Pads on both sides of the belt - can be removed if you want to remove from the non hernia side. Strategic belts with self stick-on both the sides. Adjustable waist self-stick straps accommodate a healthy range depending on the size of the waist..
  • Made from dermo friendly, hypoallergenic and durable material.
  • aesthetic & can be worn under clothing for long time without too much discomfort. Reduces occurrence of rashes/ allergies.
  • This easy to use product is available in Gray colour.
  • size varies from medium to large. For sizing, Waist size to be measured 2 inches below navel..
Check Stock

E-Z UP Food Booth Sidewall Kit, Set of 4, Fits 10' x 10' Straight Leg Canopy, Includes 2 Roll-Up Serving Windows, Commercial Grade Mesh, Black

  • Includes: 1 mesh sidewall w/truss clips with 2 roll up serving windows.
  • Attaches to straight leg shelters/canopies, sold separately. Shelter/canopy frame and top NOT included.
  • Coordinating zippers to attach on each side to fit straight leg frames.
  • Tie hooks and clasp attachments for E-Z set up.
  • Meets CPAI-84 fire resistant requirements.
Check Stock

Pyle 5 String Resonator Banjo Starter Kit Full Size 24 Bracket Geared 5th Tuner Professional Instrument w/ Remo Drum & Hardwood Back Gig Bag Tuner Picks Strap Tools

  • COMPLETE BANJO SET: Pyle brings you an all-in-one banjo set, everything you need to start playing. Comes w/ a gig bag, digital tuner, spare strings, 3 finger picks, cleaning cloth, detachable shoulder strap w/ hanger & wrench (to adjust the brackets).
  • PROFESSIONAL FULL SIZE : 38.6” instrument features a tunable 5-string banjo with 24 brackets and 22 frets, equipped with a classic traditional style binding design. Features a coated and polished rich wood finish with chrome-plated hardware/accents.
  • HEAVY DUTY HARDWARE: This complete all-in-one standard acoustic banjo starter kit is equipped with a geared 5th string tuner and high quality remo drum head. It is handcrafted from sapele hardwood.
  • ADJUSTABLE TRUSS ROD: Features adjustable truss rod & pearl color tuner pegs w/ additional 5th geared tuner side-peg. Adjust the truss rod can balance the tension caused by strings/climate change, set up perfect string height to meet different needs.
  • SAPELE WOOD: Features a rich and polished Sapele wood resonator, high-density man-made wood fingerboard, and remo milky skin banjo top, it is designed to sound as good as it looks. Includes maplewood bridge stand and truss rod adjustment tool.
Check Stock

Stainless Steel Lath Screws 8 x 3/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 3/4 0.75 in.

  • Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....
Check Stock

Stainless Steel Lath Screws, 8 x 1-5/8, Sharp Point Modified Truss Head Phillips Drive (Quantity: 100) Type 17 Cutting Point 305 (18-8) Stainless Steel, Length: 1-5/8 (1.625) in.

  • Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....
Check Stock

Stainless Steel Lath Screws 8 x 1-1/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 1-1/4 1.25 in.

  • Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....
Check Stock

for Academy Sports + Outdoors 10 ft x 10 ft One Push Straight Leg Canopy Side Truss Bars Replacement Parts

  • PLEASE MEASURE THE LENGTH OF YOUR TRUSS BAR BEFORE ORDERING!.
  • Prior to buying, please measure what replacement part you will need because there are many different styles and sizes of replacement parts that can differ from year, model, and size of canopy. Please refer to pictures to determine the exact measurements of the parts you are buying and make sure that is the part your canopy needs. If you have any questions or doubts, please message us..
  • Included: Metal - ONE ( X ) TRUSS Bar Set (Exactly as shown in picture) No other parts Included..
  • For Academy Sports + Outdoors 10 ft x 10 ft One Push Straight Leg Canopy or any brand have same dimensions and specification.
  • PLEASE NOTE: This truss does Not attach to the Middle. It attaches on the corners as shown in picture..
Check Stock

Backwoods Banjo [Vinyl]

  • Includes padded gig bag: Included with this 5-string banjo is a deluxe 15mm padded gig bag for secure carrying and storage. In addition, this guitar case is designed with a front pocket, backpack shoulder straps, and a carrying handle..
  • Premium craftsmanship: Crafted from the finest woods, with a 5-ply maple and mahogany shell, mahogany neck, closed back mahogany resonator, as well as a laurel fretboard, this beautiful 5-string banjo from Jameson is exceptional..
  • High-quality design: Jameson's banjo features a Remo Weatherking drum head, a 5/8-inch maple ebony bridge, a chrome plated armrest, an adjustable tailpiece, and truss rod. Also, designed with a removable resonator allowing you to play the banjo both open and closed back..
  • Geared 5th tuner: As a 5-string banjo, this model features a 5th geared tuner side peg. This is a beneficial enhancement over the more typical friction tuners, allowing for better control of your instrument’s sound..
  • Beautiful tone: The design behind this banjo and the chosen materials enable it to produce an eloquent, rich tone. It offers distinctive and beautiful sound characteristics, perfect for playing bluegrass, clawhammer, folk, country, and rock tunes..
Check Stock