Best Ttl Interface

Godox AD200 200Ws 2.4G TTL Speedlite Flash Strobe 1/8000 HSS Monolight with 2900mAh Lithium Battery and Bare Bulb Flash Head to Provide 500 Full Power Flashes Recycle in 0.01-2.1 Second

  • Godox AD200 Pocket Flash Speedlite has tiny Body, Interchangeable bare bulb flash heads and speedlite flash head, fast recycle time up to 0.01-2.1s, fast duration up to 1/13000s, When using Godox 2.4G wireless X system. Godox AD200 Speedlite Monolight is compatible with Canon E-TTL, Nikon i-TTL and Sony TTL etc..
  • 200Ws, GN60(m ISO 100, with AD-S2 standard reflector, @28mm) and GN52 (m ISO 10, @35mm). Stable color temperature at 5600 ± 200K over the entire power range. Professional lithium battery pack has large capacity(14.4v/2900mAh)to provide 500 full power flashes and 0.01-2.1s fast recycling.
  • 8 steps of power adjustment (1/1~1/128)offer better light effects. Godox AD200 Speedlite Monolight is Fully support flash exposure compensation. 1/8000s high speed sync, first curtain sync, second curtain sync, modeling lamp(speedlite head only), manual flash, multi flash, C.Fn custom setting, etc..
  • GODOX AD200 pocket Speedlite Monolight has strong power with lightweight and great portability. Easily packed in your pocket. With master slave function,Godox AD200 Speedlite Monolight can be Used in combination with Godot TTL camera flashes, TTL outdoor flashes, etc..
  • Built-in Godox 2.4G wireless X system and fully support of TTL functions,Use Godox 2.4G wireless X....
Check Stock

UNI-T MSO3000E Series Digital Oscilloscopes 250MHZ 2CH, 50MHz Built-in Waveform Generator

  • Product 1: UNI-T Arbitrary Waveform Generator UTG932. Dual channels. Ch1 - Ch2 combining. Output waveforms: Sine, square, pulse, ramp, noise, DC, arbitrary. Modulation types: AM, FM, PM, FSK, Line, Log. 24 groups non-volatile arbitrary waveform storage..
  • Product 1: Sampling rate of 200MSa/S. TTL level signal compatible 6 digits high accuracy built-in frequency counter. Output frequency range: 1μHz-30MHz. Full-band resolution of 1μHz. DDS (direct digital synthesis) method applied. 14 bits vertical resolution. Support frequency scanning and output..
  • Product 2: 150MHz bandwidth. 2 channels, wide vertical range: 1mV/div to 20V/div. Automatic measurement of 32 waveform parameters. New interface style. Widescreen display. 7 inches TFT LCD WVGA, RGB. 800×480 resolution. Multilingual menu available..
  • Product 2: 1GSa/s sampling rate. Storage of waveform setups and interface waveform and setup reproduction. Unique waveform record and replay function. Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device. USB drive system software upgrade..
  • UNI-T WARRANTY – A trouble-free experience with 100% 18-MONTH WARRANTY and 100% MONEY BACK GUARANTEE by UNI-T Direct!.
Check Stock

VSDISPLAY 7\ 7 Inch 1280x800 IPS LCD Screen N070ICG-LD1 with HD-MI VGA 2AV LCD Controller Board

  • 7" N070ICG-LD1 1280x800 LCD Screen: Resolution 1280RGB)×800 Outline Size 161 ×107×4.5 (H×V×D) Display Area 149.76 × 93.6 (H×V) Brightness 400 cd/m² (Typ.) Contrast Ratio 800:1 (Typ.) (TM).
  • Display Mode HS-IPS, Normally Black, Transmissive. Signal Interface LVDS (1 ch, 8-bit) , Connector , 39 pins..
  • HD-MI VGA 2AV LCD Board Work for LVDS Interface LCD Screen, 50Pin TTL Connector for 7inch~10.1inch LCD Screen.
  • Recommend Power Adapter Spec: Input Power Adapter:12Vdc More than 2A. (VSDISPLAY Power Adapter, AC 100-240V Input to 12V DC,2A Output ,Power Supply, US Plug , Fit SC24W-1202000U, Fit for All Types of VSDISPLAY LCD Controller Board) Come In Standby Model When Not Input Signal. Standby Model 003c1W.
  • Packing list : 1× HD-MI VGA+2AV LCD Controller Board VS-TY2662-V1 1× 7inch N070ICG-LD1 1280x800 LCD Screen 1× LVDS Cable 1× Keyboard With Cable(Help to notice , there is no power adpter in the packing list.).
Check Stock

Aoicrie 5Pcs DC 5V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger

  • This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
  • These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
  • Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
  • And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
  • Wide Application These 5V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine /etc..
Check Stock

Dorhea 37 in 1 Sensor Modules Kit with Tutorial for R3 Board Mega2560 Mega328 Nano Compatible with IDE Raspberry Pi

  • 37 in 1 sensor module Kit is complete update and common models,compatible with arduino R3, MEGA 2560, NANO and Raspberry pi..
  • All components compatible with Arduino IDE, can be used directly..
  • Standard interface can be controlled directly by microcontroller ( 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)..
  • Upgraded tutorial only for R3, MEGA2560 R3, NANO in CD, There are tutorials in the CD that comes with..
  • Complete Update and common models for arduino NANO R3 Mega 2560 starter kit..
Check Stock

UNI-T MSO3000E Series Digital Oscilloscopes 4CH, 50MHz Built-in Waveform Generator (MSO3254E 250MHz 4CH)

  • Product 1: UNI-T Arbitrary Waveform Generator UTG962. Dual channels. Ch1 - Ch2 combining. Output waveforms: Sine, square, pulse, ramp, noise, DC, arbitrary. Modulation types: AM, FM, PM, FSK, Line, Log. 24 groups non-volatile arbitrary waveform storage..
  • Product 1: Sampling rate of 200MSa/S. TTL level signal compatible 6 digits high accuracy built-in frequency counter. Output frequency range: 1μHz-60MHz. Full-band resolution of 1μHz. DDS (direct digital synthesis) method applied. 14 bits vertical resolution. Support frequency scanning and output..
  • Product 2: 150MHz bandwidth. 2 channels, wide vertical range: 1mV/div to 20V/div. Automatic measurement of 32 waveform parameters. New interface style. Widescreen display. 7 inches TFT LCD WVGA, RGB. 800×480 resolution. Multilingual menu available..
  • Product 2: 1GSa/s sampling rate. Storage of waveform setups and interface waveform and setup reproduction. Unique waveform record and replay function. Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device. USB drive system software upgrade..
  • UNI-T WARRANTY – A trouble-free experience with 100% 18-MONTH WARRANTY and 100% MONEY BACK GUARANTEE by UNI-T Direct!.
Check Stock

Aoicrie 5Pcs DC 12V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger

  • This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
  • These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
  • Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
  • And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
  • Wide Application These 12V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine etc..
Check Stock

CP2102 6 in 1 USB to TTL Serial Adapter Module USB to TTL 485 232,TTL to 232 485,RS232 to 485 + 4P Dupont Cable Jumper Wire Female to Female for Nextion Display Beitian GPS Arduino Windows

  • -cp2102 serial adapter module supports usb to ttl, usb to rs232, usb to rs485, ttl to 232, ttl to 485, 232 to 485..
  • -USB specification 2.0 not 3.0, compatible with arduino,Windows XP/7/8/10 32bits/ 64bits, Linux etc..
  • -You need to set the dip switches for different conversion purpose..
  • -Before make 6 in 1 usb to ttl module work, you need to install cp2102 driver..
  • -cp2102 usb to ttl adapter widely used with nextion display, beitian gps, esp-01s adapter, sim7000a board etc..
Check Stock

Qunqi 4pcs 5V 2 Channel 5V Relay Module with Optocoupler Low Level Trigger Expansion Board Compatible with R3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi

  • Indication LED's for Relay output status.
  • IN: can be high or low level control relay.
  • Equiped with high-current relay, AC250V 10A.
  • Standard interface that can be controlled directly by microcontroller (Compatible with , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
Check Stock

Flashpoint XPLOR 600 HSS TTL Battery-Powered Monolight with Built-in R2 2.4GHz Radio Remote System - Bowens Mount (AD600 TTL) R2 Mark II ETTL 2.4 GHz Wireless Flash Trigger for Sony

  • Flashpoint XPLOR600 TTL 600ws Monolight - 600ws Flashtube with Protective Cover - Standard 7" Reflector - Rechargeable Lithium Battery - AC Battery Charger Set - Compartment Case - Flashpoint 2-Year Full USA Warranty - Flashpoint R2 Mark II ETTL Transmitter - Flashpoint 1-Year Warranty.
  • Guide Number 183 (ft) / 61 (m) ISO 100, with standard reflecto.
  • Built-in 2.4G R2 Radio Remote System Compatible wireless TTL system: Fully supports the Canon E-TTL II, Nikon i-TTL and additional TTL systems in Flashpoint R2 remote system..
  • Integrated professional 11.1V/8700mAh lithium battery pack.
Check Stock