Fosi Audio Box X1 Phono Preamp for MM Turntable Mini Stereo Audio Hi-Fi Phonograph/Record Player Preamplifier with 3.5MM Headphone and RCA Output with DC 12V Power Supply
【Converts Phono Signals】: Compact ultra-low noise phono turntable preamp that converts phono signals to line-level signals. Designed with a grounding post to protect your turntable..
【Features Power Switch & 3.5MM Headphone Output】: The unique power switch button design is very convenient to use. You can enjoy high-quality music with headphones through the 3.5 mm headphone output. Note: RCA line output and AUX headphone output can be output simultaneously..
【3.5MM / RCA Output】: BOX X1 supports MM turntable input, 3.5MM headphone output, and RCA line output for powered speakers. Note: You can connect a power amplifier through the 3.5MM or RCA output, then connect the passive speakers..
【MM Phono Preamplifier & DC12V Power Adapter】: Output Voltage Level: 2V max (P-P) at 10K Ohms, SNR: 70dB, THD: ≤0.08% @ 1kHz and 3mV, Frequency Response: Standard RIAA. Equipped with DC12V high-quality power supply..
【What You Get】: BOX X1 phono preamp x1, 12V power adapter x1, User manual x1, our worry-free 18-month warranty, and friendly customer service..
Pyle Phono Turntable Preamp - Mini Electronic Audio Stereo Phonograph Preamplifier with 9V Battery Compartment Separate DC 12V Power Adapter RCA Input RCA Output & Low Noise Operation PP555 BLACK
CONVERTS PHONO SIGNALS: A turntable preamp that converts phono signals to Line Level Signals. This state-of-the-art circuitry phono preamp can....
LOW NOISE OPERATION: Offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers. The output is 2V max (P-P) at 10K Ohms. It’s....
CONNECTS TO TURNTABLES: Connect any turntable to modern sound equipment without specialized phono input for amplifying music. For the receiver, this....
SIMPLE PLUG & PLAY: This mini preamp has stereo RCA inputs and stereo RCA outputs. Connect the turntable to the RCA inputs and ground. Then, connect....
Nobsound Little Bear T7 Vacumn Tube Mini Phono Stage RIAA MM Turntable Preamp & HiFi Tube Pre-Amplifier (Silver)
CONVERTS PHONO SIGNALS: A turntable preamp that converts phono signals to Line Level Signals. This state-of-the-art circuitry phono preamp can accommodate magnetic pickups with an input sensitivity of 3mV at 50K Ohms.
LOW NOISE OPERATION: Offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers. The output is 2V max (P-P) at 10K Ohms. It’s better to position the preamp close to the source to reduce unwanted noise and interference.
CONNECTS TO TURNTABLES: Connect any turntable to modern sound equipment without specialized phono input for amplifying music. For the receiver, this can be connected to speakers, computers, laptops and more.
SIMPLE PLUG & PLAY: This mini preamp has stereo RCA inputs and stereo RCA outputs. Connect the turntable to the RCA inputs and ground. Then, connect the amplifier receiver to the RCA outputs.
Kinter PR400 Ultra Compact Phono Vinyl Turntable Preamp - Mini Electronic Audio Stereo Phonograph Preamplifier with Gold Plated RCA Input and Outputs & Low Noise Operation 12 Volt DC Adapter Included
PERFECT FOR PHONO/TURNTABLES: A turntable phono preamp that converts phono signals to Line Level Signals. This state-of-the-art circuitry phono preamp accommodates magnetic pickups with an input sensitivity of 3mV at 50K Ohms..
LOW NOISE OPERATION: Offers outstanding value and performance with a Low-Noise Audio Operational Amplifiers. Integrated circuitry accommodates Magnetic Pickups. The output is 2V max (P-P) at 10K Ohms. PLEASE NOTE: The PR400 Preamp should be located close to the source (turntable) to reduce the possibility of unwanted noise and outside interference impacting the signal quality..
SIMPLE PLUG & PLAY: The PR400 Mini Phono Preamp has gold plated stereo RCA inputs and stereo RCA outputs. Connect the turntable to the RCA inputs and attach the ground wire from your turntable to the grounding screw found on the preamp. Connect the amplifier or receiver to the RCA outputs of the preamp and you’re ready to spin up some vinyl. Simple as that!.
POWER ADAPTER INCLUDED: 12VDC power adapter tested for quiet operation and soft Orange LED Power indicator on the PR400 preamp indicates the unit is powered on and ready to convert signal..
GOLD PLATED RCA CONNECTORS: reduces the possibility of corrosion which could cause signal loss and nonlinearity ....
Rockville BLUAMP 90 Home Stereo Bluetooth Receiver Amp w/Mic+Phono+HDMI Input..
4 Ohms: 50 x 2 watts RMS and 200 x 2 watts peak. 8 Ohms: 30 x 2 watts RMS and 120 x 2 watts peak. Built in Bluetooth with 33 foot range. Plays music stored on USB or memory card. Mic inputs with echo for karaoke. Class D circuit with great sound quality. Selectable RCA aux/phono input to connect a record player or any analog audio device..
Optical input. HDMI input. (2) 1/4" Mic inputs for Karaoke with Echo control and mic volume control. (1) set of RCA Audio Outputs to connect to a subwoofer or another amplifier. Bass/Treble/Mic and Master Volume controls. Binding post speaker output terminals (2 pairs). Built-in Pre-Amplifier with low distortion. LCD Display ..
Frequency Response (±3dB): 22 Hz- 20 KHz. AUX Input Impedance: 10k Ohms. AUX Input Sensitivity: 300mV. Phono input impedance: 47K. Phono input sensitivity:20mV. Output Impedance: 4-8ohm. Total Harmonic Distortion(THD): ≤0.5%. Signal-to-Noise Ratio(S/N):....
Sony PS-LX310BT Belt Drive Turntable: Fully Automatic Wireless Vinyl Record Player with Bluetooth and USB Output Black
EASY OPERATION: Effortlessly enjoy your favorite records with one-step auto start, stop and return.
TWO SPEEDS: 33 1/3 rpm and 45 rpm, with the 45 rpm adaptor stowed neatly in a slot beneath the deck.
HIGH QUALITY AUDIO: Built in switchable phono output / line out phono preamp and 3 gain settings.
USB RIPPING: Rip vinyl records to digital MP3 files on your computer to take a favorite LP on the go.
WIRELESS CONNECTION: Connect to wireless speakers, headphones or other Bluetooth enabled devices. Supports phono and line output thanks to built-in Phono EQ.
WIRED CONNECTION: PSLX310BT turntables include RCA cables for plugging directly into a stereo system.
STABLE PLATTER: An aluminum die-cast platter reduces vibration for increased clarity and hi-fi sound.
STRAIGHT TONEARM: A newly designed aluminum pipe tonearm gives the record players improved tracking.
IN THE BOX: Turntable, removable dust cover, vibration dampening slip mat, 45 adaptor, USB B cable.
Vectra 3D repels and kills fleas, ticks, mosquitoes, lice, mites (excluding mange mites), and biting and sand flies. Each tube protects your dog for 1 month preventing all flea stages from developing. Vectra 3D is quick drying, non-greasy and waterproof. It begins reducing flea feeding in 5 minutes, kills fleas that may cause flea allergy dermatitis, repels and kills Brown dog ticks, American dog ticks, Deer ticks, Gulf Coast ticks and Lone Star ticks for one month. Vectra 3D repels and kills mosquitoes that may transmit vector-borne disease. DO NOT USE ON CATS-MAY BE FATAL.
Repels and kills fleas, ticks, mosquitoes, lice, mites (excluding mange mites), and biting and sand flies..
Pyle Phono Turntable Preamp - Mini Electronic Audio Stereo Phonograph Preamplifier with RCA Input, RCA Output & Low Noise Operation Powered by 12 Volt DC Adapter - PP999 , Black
CONVERTS PHONO SIGNALS: A turntable preamp that converts phono signals to Line Level Signals. This state-of-the-art circuitry phono preamp can accommodate magnetic pickups with an input sensitivity of 3mV at 50K Ohms.
LOW NOISE OPERATION: Offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers. The output is 2V max (P-P) at 10K Ohms. It’s better to position the preamp close to the source to reduce unwanted noise and interference.
CONNECTS TO TURNTABLES: Connect any turntable to modern sound equipment without specialized phono input for amplifying music. For the receiver, this can be connected to speakers, computers, laptops and more.
SIMPLE PLUG & PLAY: This mini preamp has stereo RCA inputs and stereo RCA outputs. Connect the turntable to the RCA inputs and ground. Then, connect the amplifier receiver to the RCA outputs.
