(100-PACK) - 1/4\ Inch 360 Degree Drip Emitter On 6\ Stake Sprayer Adjustable Flow 0-20 GPH, Fits 1/4 (4-6mm) Irrigation Tubing - Micro Bubbler Drippers for Drip Irrigation (100 Pack Dripper on Stake)
SIZE: For use with any 1/4" Inch tubing size - 4 to 7 mm (Can also be punched into 1/2 drip tubing)..
PREVENT LEAKS & BLOWOUTS: These emitters are designed with an operating pressure: up to 25 PSI. If your system is over that number blowouts and poor performance will occur..
DESIGN: Barb design ensures tubing will not slip out or blow off at high pressure and temperature NOTE: THE MAXIMUM RECOMMENDED AMOUNT OF FITTINGS PER ZONE AT 25PSI IS QTY.22 IF YOU EXCEED THIS AMOUNT YOU MAY HAVE INSUFFICIENT WATER PRESSURE..
ECO FRIENDLY: Provide water directly where you need it without any overspray!.
EASY TO INSTALL: Install emitters directly into the 1/2 main line or branch off with 1/4 inch tubing and connect fittings to the ends! INCLUDES CONNECTORS!.
REMOVES IN SECONDS: 1 Inch disconnect clip removes push to connect fittings requiring no special tools, no soldering, no crimping or glue. Just use the disconnect clip to make any adjustmentsREMOVES IN SECONDS: 1/4 inch disconnect clip removes push to connect fittings requiring no special tools, no soldering, no crimping or glue. Just use the disconnect clip to make any adjustments.
COPPER, PEX, CPVC: SharkBite disconnect clip removes plumbing fittings that fit copper tubing, and CTS CPVC and PEX and connects all three types in any combination.
QUALITY: Only SharkBite’s quality and performance is field-proven and is the only push-to-connect brand that can ensure a clean, leak-free connection.
RESIDENTIAL and COMMERCIAL: All SharkBite PEX tubing and silicone wrap meets the same standards for commercial and residential plumbing applications.
MADE IN THE USA: Manufactured and tested in the USA.
Utah Pneumatic Dot Air Fittings Tee Union 1/4”Od 1/4” Npt Air Push Fittings Male Female brake tube fittings Push In Fitting D.O.T Approved For Sae Brake Line fittings Applications Pack Of 2
Typical application: Air brake systems push dot fittings pneumatic fittings brass air brake fittings dot air line fittings.
Maximum operating pressure of 150 psi dot air brake fittings air line fittings 1/4 dot push union dot compliant air line fittings.
Temperature Range:_65°F to +250°F-40°C to +93°C push-to-connect fittings ptc air fittings push lock fittings.
Material:CA360 ,CA377 brass push air fittings tee brass fitting airline tee fitting air fittings 1/4 dot.
Hromee Air Line Service for Air Spring Suspension with Fittings Schrader Valves and 20FT Hose Air Bag Replacement Components
AIR LINE TUBING - Outer diameter: 1/4 inch.
Length: 20 feet. The red air line tubing is made of nylon that is light and flexible. The max working....
EASY INSTALLATION - All the fittings are designed with PTC (push-to-connect). Hose installation is done by pushing the tube into the hole until the....
UNIOn TEE - It can be used to tie a set of air springs together for a single path installation. Push-to-Connect fitting for easy connection to air....
INFLATION VALVE - Two schrader valves are made of brass that is for maximum strength and durability. Designed to inflate or deflate manually your air....
ELBOW FITTINGS - The elbow fittings are connected with 1/4” air tube. One head is 360 swivel 1/4” FNPT thread and the other head is 1/4” push to....
Corsair Hydro X Series XT Hardline 12mm Multicard Kit
The CORSAIR Hydro X Series XT Hardline Multicard Kit is pre-cut for SLI and CrossFire X, letting you easily add multiple cards to your custom cooling system in two, three or four slot graphics card spacing..
Crystal-clear chamfered tubing easily and neatly links your GPU water blocks together with just one set of Hydro X Series XT Hardline Fittings..
Resilient PMMA construction won’t warp or deform under high pressure or temperatures..
Neatly link your GPU water blocks together with crystal-clear, ultra-resilient chamfered tubing using just one set of Hydro X Series XT Hardline Fittings..
Max Operating Temperature: 60°C coolant temperature.
Hromee Air Line Tubing Kit, 1/4 Inch (6.35MM) OD x 32.8 Feet Polyurethane PU Tube and Push to Connect Fittings, 14 PCS Compressed Pipe and Accessories Kit
DIY AIR SYSTEM - Hromee compressed air outlet kit allow you to design and install your own pressurized air system. No more dragging the compressor and reconnecting air hose. It helps you keep the working room clean and ordered..
Inner Diameter: 4.15mm. Max Working Pressure: 120 PSI.
Bursting Pressure: 360 PSI. Working Temperature: -4℉- 149℉. PU material provides the high flexible and oil resistant..
CONNECTORS - All the connectors are designed push to connect that is easy to remove and offering good sealing. The kit includes 2 Splitters, 2 Elbows, 2 Tees and 2 Unions. 4 male straight fittings fit 1/4" Tube OD and with 1/4" NPT Thread. The thread need to be seal taped to avoid leakage..
EASY TO USE - All the fittings work by simply pushing the tubing firmly into the the fitting to seal and removing the tubing is just as simple. Cutting tool is included for meeting your tube length requirements..
Ultimate Flexibility: Customer can purchase additional fittings to customize your air line installation, based on your space and compressed air requirements, which is a perfect solution for garages, workshops, barns, etc..
HaSaoMoi Air Brake Line Fitting, DOT Brass Push in Fitting, Push to Connect Union Fittings Air Brake Union 1/4" Tube OD for Trucks Trailers andIndustrial Use (4 Pack)
【PREMIUM MATERIAL】：Our push in fittings are made of high quality CA360 brass,Certified by DOT and Air Brake system Requirements,with corrosion resistance, high temperature ductility and low permeability. Great for long time use, dot air brake fitting pneumatic fittings type: 1/4".
【TYPICAL APPLICATION】：The air brake fittings assortment kit can be used with air systems, copper tubing in air lines brake systems, which is perfect for automotive car or truck repair,air operated seats, operating gauges, air horns, heater controls, industrial workshops, daily garden or lawn mower repair, towing machine hose connection and air brake connections ..
【EASY TO BE INSTALLED】: Union connect two tube with same OD. All quick connect fittings can be sealed by pushing the tube firmly into the fittings and they are also simple to be removed from the tube..
【MAX PRESSURE】: Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer’s recommendations for pressure and temperature mutations).
