Best Tubing Pipes

Kalolary 2Pcs Drip Irrigation Tubing Hole Punch, Drip Tube Hole Punch Tool Outdoor Drip Irrigation Pipe Hand Punch for 16/20mm PE Pipe Opening Hole Punch

  • Sturdy and Durable - Made of high quality plastic, this punch is durable, stable and rust. And the puncher has been polished so it will not become dull and can be used for a long time..
  • Size - Suitable for PE pipes with a diameter of 16/20/25mm, punches holes measuring 3 mm (0.118 Inches), proper size can make sure that sprinklers can snug fit on the tubing for minimizing waste..
  • 2-In-1 Punch and Fitting Insert - Our irrigation tool kit is suitable for both drip tubing punch and 1/ 4 fitting insertion use,ergonomic design, easy to operate..
  • How to use - Simply press the tool through the tubing and then remove the punch tool with a pre-punched hole left.
  • Insert the fitting into the tubing, then slide the tubing according to the slot and push the fitting into pre-cut hole.
  • Package - You will receive1 professional punch tool, 1 2 in 1 punch and accessory inserts. Good tools for gardening and irrigation,sufficient quantity for your daily using..
Check Stock

uxcell Clear Rigid Tubing 18mm(11/16'') ID x 20mm(3/4'') OD x 1Ft Length Round Plastic Polycarbonate Tube

  • Feature: 1 piece 0.7-inch ID x 0.79-inch OD, 305mm/1Ft Length Clear Rigid Tubing is sturdy and durable, it has good electrical insulation, good tensile and compressive strength..
  • Material: Clear Round Tube is made of polycarbonate with high impact-resistant, it is easy to be processed. You can use the hacksaw or pipe cutter to cut it down..
  • Advantage: Rigid Round Tubing has good size stability, high transparency, wear resistance, corrosion resistance, and is not scratched easily..
  • Operating Temperature: The PC plastic tubing cannot be stored in water above 140 ℉ for a long time..
  • Application: Widely used in water pipes, lamp and light, hardware, display racks, ect..
Check Stock

John Guest Acetal Copolymer Tube Fitting Adaptor 1/4 Tube OD x 1/4 NPTF Female Pack of 10

  • Adapter for connecting pipes or fittings of different types.
  • Push-to-connect fitting connects to pipes or tubing on one end and a flared female NPT connector on the other.
  • Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength.
  • Meets NSF/ANSI standards 14, 51, and 61 for quality assurance.
Check Stock

DNA Motoring ZTL-25SS 16 Pcs 2.5 Inches Stainless Steel DIY Custom Exhaust Tubing Mandrel Bend Pipe Straight & U-Bend Kit, Universal Fit

  • Easy To Use: Slip Fit Joints to Provide Easiest Fabrication.
  • Universal Kit: 4 pcs 48" Straight Pipes, 4 pcs 90 Degree Pipes, 4 pcs 45 Degree Pipes, 4 pcs 180 Degree U-Bends.
  • Sturdy Structure: Made of High Quality Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
  • i.e. Maximizing Smoothest High Exhaust Air Flow Rate.
  • DIY Custom: These Exhaust Bend Kits Include Enough Tubing To Allow You To Run Your Own Exhaust System The Way You Want It.
Check Stock

Cord Protectors Flexible PVC Cable Cover Keep Cats from Chewing Cords, Dog Cord Protector Clear Electrical Wire Protector Tubing Cable Sleeves, Home Office School Supplies (Total 30 Feet)

  • Application Areas: the spiral cable wrap is suitable for computer cables, power cords, water pipes, air conditioning pipes, heating pipes, hoses, oil pipes, hydraulic pipes, high-pressure pipes of excavators, loaders and other construction machinery and injection molding machine, provides better protection and extend the life of the pipe.
  • Quality Material and Size Detail: dog bite cable protector is made of pp material, with bright appearance, good resilience, wear, aging and oil resistance, ensuring long term use.
  • The size of each cable wrap is 9.8 ft x 0.4 inch, which is long enough to meet your needs.
  • Spiral Design: the cat wire protector adopts a spiral design, which is convenient to install manually, saving time and effort.
  • You only need to put the messy wires in the wrap to avoid entanglements and fetters, providing a clean and tidy space for you.
  • Practical Cover: this cord covers for pets effectively protects your cables from being chewed and torn by cats, dogs, and other small pets.
  • The bright colors allow them to also be applied to decorate rooms.
  • How of Use: cut the length of the wire protector tubing for pets to the desired size, then find the slit and put the wire in.
  • Once the wire is insert, the slit will remain closed.
Check Stock

uxcell Rigid Round Clear Tubing 37.6mm(1.48'') ID x 40mm(1.57'') OD x 1.64Ft Length Plastic Tube

  • Feature: 1 piece 1.48-inch ID x 1.57-inch OD, 500mm/1.64Ft Length Clear Rigid Tubing is sturdy and durable, it has good electrical insulation, good tensile and compressive strength..
  • Material: Clear Round Tube is made of polycarbonate with high impact-resistant, it is easy to be processed. You can use the hacksaw or pipe cutter to cut it down..
  • Advantage: Rigid Round Tubing has good size stability, high transparency, wear resistance, corrosion resistance..
  • Operating Temperature: The PC plastic tubing cannot be stored in water above 140 ℉ for a long time..
  • Application: Widely used in water pipes, DIY tubes, hardware, display racks, etc..
Check Stock

Brennan PCNY2403-06-04 PBT Push-to-Connect Tube Fitting Reducing Coupler 3/8 Tube OD x 1/4 Tube OD

  • Reducing coupler for connecting two pipes with different diameters.
  • Push-to-connect fitting connects to pipes or tubing on both ends.
  • Made of polybutylene terephthalate (PBT) for resistance to solvents, shrinkage, heat, and impact.
  • Operating temperature ranges from -4 to 175 degrees F.
Check Stock

DNA Motoring ZTL-25RAW 16 Pcs 2.5 Inches Mild Steel DIY Custom Exhaust Tubing Mandrel Bend Pipe Straight & U-Bend Kit, Universal Fit

  • Specification: 18-Gauge Piping Walls, Inlet / Outlet Size (IN) : 2.5" OD.
  • Easy To Use: Slip Fit Joints to Provide Easiest Fabrication.
  • Universal Kit: 4 pcs 48" Straight Pipes, 4 pcs 90 Degree Pipes, 4 pcs 45 Degree Pipes, 4 pcs 180 Degree U-Bends.
  • Sturdy Structure: Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, i.e. Maximizing Smoothest High Exhaust Air Flow Rate.
  • DIY Custom: These Exhaust Bend Kits Include Enough Tubing To Allow You To Run Your Own Exhaust System The Way You Want It.
Check Stock

uxcell 3pcs Clear Rigid Tubing 8mm(5/16'') ID x 10mm(25/64'') OD x 1Ft Length Round Plastic Polycarbonate Tube

  • Feature: 3pcs 0.31-inch ID x 0.4-inch OD, 305mm/1Ft Length, Clear Rigid Tubing is sturdy and durable, it has good electrical insulation, good tensile and compressive strength..
  • Material: Clear Round Tube is made of polycarbonate with high impact-resistant, it is easy to be processed. You can use the hacksaw or pipe cutter to cut it down..
  • Advantage: Rigid Round Tubing has good size stability, high transparency, wear resistance, corrosion resistance, and is not scratched easily..
  • Operating Temperature: The PC plastic tubing cannot be stored in water above 140 ℉ for a long time..
  • Application: Widely used in water pipes, lamp and light, hardware, display racks, ect..
Check Stock

uxcell 2pcs Clear Rigid Tubing 4mm(5/32'') ID x 6mm(1/4'') OD x 1Ft Length Round Plastic Polycarbonate Tube

  • Feature: 2pcs 0.16-inch ID x 0.23-inch OD, 305mm/1Ft Length, Clear Rigid Tubing is sturdy and durable, it has good electrical insulation, good tensile and compressive strength..
  • Material: Clear Round Tube is made of polycarbonate with high impact-resistant, it is easy to be processed. You can use the hacksaw or pipe cutter to cut it down..
  • Advantage: Rigid Round Tubing has good size stability, high transparency, wear resistance, corrosion resistance, and is not scratched easily..
  • Operating Temperature: The PC plastic tubing cannot be stored in water above 140 ℉ for a long time..
  • Application: Widely used in water pipes, lamp and light, hardware, display racks, ect..
Check Stock