Best Tubing Swaging Tool And Flare Tool

Lichamp Stainless Steel Cable Crimper Hex Lug Tool Hydraulic Hand Crimping Swaging Tool for Dteel Eire Rope 1/8 and 3/16 inch

  • STEEL CABLE SWAGER - Hand held hydraulic crimping tool with multi-size dies is great for crimping the stainless steel sleeve fittings of cable railing....
  • WIDE APPLICATION - Come with 9 pairs of the LUG TYPE crimping dies. Customized for swaging 1/8 inch(4 mm Die) or 3/16 inch (8 mm or 10 mm Die)....
  • POWER WIRE CRIMPER - Crimps 12 AWG to 2/0 AWG size copper and aluminum wires. Good choice for battery and welding cables, power wires, electrical....
  • LONG LASTING MATERIAL - All swaging dies were made of durable carbon steel and coated with chrome finish, high strength and good toughness..
  • EASY TO OPERATE - It is equipped with quick switch, C shape head and rubber-coated soft handle. Complete your swaging project smoothly in seconds..
Check Stock

YELLOW JACKET 60430 Lightweight Swaging/Flaring Tool 6 Positions

  • Six quick-change positions for flaring soft chopper and aluminum tube.
  • The chrome finish of the swaging pins allows for an easy swaging operation.
  • Strong aluminum bars – each hole flare tested more than 1000 times.
  • Swage pin sizes are molded into the case for easy organization and differentiation.
  • Quick connect feature on lightweight yoke saves time during pin/cone changing.
Check Stock

Racewill 25 ft 3/16 Copper Coated Brake Line Kit Includes 16 Fittings and 4 Unions Brake Line Fittings + Brake Line Double & Single Flaring Tool Kit

  • MATERIAL：Racewill copper coated steel line is easy to be bent by hand and flare by simple tools.all brake line fittings are made of durable brass to prevent rust and plated for corrosion resistance.
  • UPGRADE TO 20 FITTINGS: ① 2 x 3/16” (7/16-24) Inverted Tube Nut.
  • ② 10 x 3/16" (3/8-24) Inverted Tube Nut.
  • ③ 2 x 3/16” (1/2-20) Inverted Tube Nut.
  • ④ 2 x 3/16"(9/16-18) Inverted Tube Nut.
  • RUST AND CORROSION PROOFING：Our 3/16 Copper coated steel line are the longest lasting brake line and much better than standard steel tubing. Copper coated brake line are ideal for vehicles experiencing harsh weather and environmental conditions.
  • MAKE DOUBLE & SINGLE FLARES: Designed to use when flaring single or double flare in a variety of material: copper, aluminum, brass, magnesium, and soft steel brake line tubing. Flaring tool apply to 1/2", 3/8", 5/16", 1/4", 3/16" O.D. tubing..
  • WIDELY APPLICATION：Brake line and fittings Fits for Most Hydraulic Braking Systems, Fuel Systems, and Transmission Systems,etc. It is also widely fit for household, industrial and commercial uses..
Check Stock

25Ft 3/16 Copper-Nickel Coated Alloy Brake Line Tubing Coil Kit Tube Roll with 16 Fittings

  • 25 Ft Roll x 3/16" copper-nickel alloy COATED OD Zinc plated steel brake line tubing with 16 assort fittings..
  • It won't rust, corrosion resistance, extremely easy to bend by hand and flare by simple tools..
  • The brake line is very flexible and very easy to bend and flaring to mount - you can manually bend our brake lines without the need for a bending tool.
  • It includes SAE flare Nuts and meets relative international standards..
  • With superior durable material and great performance for longer use..
Check Stock

Raindrip 63100UB Professional Hole Punch

  • Punch holes in supply tubing for easier insertion of ¼ in. barbed fittings and emitters with ¼ in. barbed inserts.
  • Works anywhere along the length of supply tubing where you want to insert a micro fitting or dripper.
  • The Hole Punch Tool punches a hole in supply tubing to insert fittings to connect tubing or drippers with barbed inserts.
  • Holds ½ in., 5/8 in., and 0.710 in. supply tubing to punch holes to fit ¼ in. barbed fittings and emitters with ¼ in. barbed inserts.
  • Use with ½ in., 5/8 in., or 0.710 in. Supply Tubing to punch holes.
  • Hand-held tool is designed with a comfortable pistol grip for strain-free use.
  • Metal hole punch tip penetrates tubing wall when handgrip is pressed.
  • Sliding shelf on tubing rest slides out to accommodate larger sized tubing.
  • Comes with one Pistol Grip Hole Punch Tool.
Check Stock

PUXING Swaging Tool Drill Bit Set 6pcs Professional Manual Copper Pipe Swage Tool Drill Bit w/Triangular Handle HVAC Repairing Set Include 7/8 3/4 5/8 1/2 3/8 1/4 Bits

  • ✔️Material: Made of ball bearing steel, it is practical and durable. The flares will always have the same size and will fit perfectly.
  • ✔️Innovation: Revolutionizing system for molding tubes using heat by friction way more surface of contact between the flare and the Valve..
  • ✔️Usage: Air conditioning installation, open copper tube, so that two copper tube mutual link.(To be installed on hand electric drill).
  • ✔️Replace: You can use it to replace the old or brocken one. Package: Our package come with 6pcs copper pipe swaging tool drill bit.It is a good....
  • ✔️Easy to Install: Perfect for installers, no matter if you are just learning or have been doing it..
Check Stock

Saipe 5 Pcs Swaging Tool Drill Bit Set 1/4 Inch Hex Shank Copper Pipe Flaring Tool Tube Expander Air Conditioner Copper Pipe Swaging Flaring Tool for Copper Tubing 1/4 3/8 1/2 5/8 3/4

  • 【Swage Drill Bit Set】Size: 1/4'' (6.35mm), 3/8'' (9.5mm), 1/2'' (12.7mm), 5/8'' (15.9mm), 3/4'' (19mm). Total Length: 50/54/57/60/63mm. Shank....
  • 【Tube Expander】Suitable for【Tube Expander】Suitable for hard and soft copper standardized, easy to braze swaging set. Come with 5 different....
  • 【Durable For Use】Made of high quality bearing steel for high and uniform hardness and wear resistance. High elastic limit for good performance and....
  • 【Swaging Tool】When installing the air conditioner, use a pipe expander to widen the copper pipe, so that the two copper pipes can be accurately....
  • 【Easy to Use】Just need to install it on the electric hand drill to use. Flaring tool drill bit set are small in size, so you can take it with you....
Check Stock

Hydraulic Tube Expander Compact Swaging Tool Kit with Tube Cutter Deburring Tool and 7 Expander Heads for 3/8 to 1-1/8 Inches Copper Pipes

  • WHY NEED IT -- Our HVAC Hydraulic Tube Expander Compact Swaging Tool Kit is ideal for HVAC/R instillation and maintenance. A must have tool for a hvac....
  • APPLICATIONS -- Comes with 7 expender heads of 3/8'', 1/2'', 5/8'', 3/4'', 7/8'', 1'' and 1-1/8''(O.D.), Compatible with a wide range of pipe....
  • UPGRADED DESIGN -- Use the knob to make the expander tool "reset/work", durable and reliable. The whole tool kit is composed of black, silver and....
  • EASY TO USE -- Handy to choose the expander head with the marked size, the tube expander with the thick and comfortable handle is easy to operate,....
  • WHAT YOU GET -- Package includes Hydraulic Tube Expander, Deburring Tool, Tube Cutter and 7 Expander Heads, User Manual. All in a decent suitcase. We....
Check Stock

TGR Professional Brake Line Flaring Tool- 45 Degree Set - Single Bubble and Double Flares

  • Includes dies for 3/16”, 1/4”, 5/16”, 3/8” tubing..
  • Creates Single Flares, Bubble Flares, and Double Flares.
  • T-handle screw clamp securely holds die and tube.
  • Each tool comes pre-tested from the factory and includes the sample flare from the test..
Check Stock

Muzata 200pack Aluminum Crimping Loop Sleeve for Hanging and Securing 5/32inch(4mm) 1/8\ 1/16\ Wire Rope Single Barrel Ferrule CableLine End CB39

  • ...d any other projects require loop ends on wire ropes..
  • Specifically designed for 5/32 In (4mm) Stainless steel cable wire rope, simply slide the cable into the wire rope sleeve, then pass the end of the rope back through the remaining ferrule to form an appropriately sized loop. After using a mechanical or hydraulic swaging tool to obtain the full holding power of stainless steel oval sleeves. It really depends on how good your swaging tool is. Please search B06XD4DY22 to purchase the recommended hand crimping tool..
  • CableGenie system - This product belongs to the wood CableGenie cable railing system, in which we have planned everything you need for a cable railing project. It includes: Cable railing kits (CR73 or CB16).
  • Plz scroll down to" product description" or download the user guide PDF for complete system information..
  • Free design service - If you are a beginner or not sure about how to do it. Please reach us by clicking "by Muzata" below the golden button. Our experts can do all the planning, designing, and budget works for you without extra charging. Then you can follow the shopping list to buy all the materials in 3 minutes..
Check Stock