Electrified - The Current State of Electric Vehicles
Replace your wall switch or spring-wound timer with this quiet push button digital countdown timer. Timer is great for use with lights, exhaust fans, and heaters. Compatible with incandescent, CFL and LED bulbs.
Choose from the following preset countdowns: 5 min, 15 min, 30 min, 1 hour, 2 hour, or 4 hour. On/Off push button also allows you to turn the wired device ON or OFF without an end time.
Blue LED indicator lights show last used preset (blinks every 20 seconds). LED lights will stay on when wired device is ON without an end time.
Includes a single décor wall plate and fits most single or multi-gang rocker plates.
DOES NOT require a neutral wire (Ground wire IS REQUIRED). Ratings – 125VAC 60 Hz: 6.4A Resistive, 800W Tungsten, 800VA Ballast, 1/4 HP.
NNNJunhua Stainless Steel Heavy Duty Rope Clamps Double Rope Clamps 2 Lines of Rope Metal Clips Fits 14/45 Inch(8mm) to 1/2 Inch(12.5mm) Twisted or Braided Ropes 10 Pieces, Silver
Size: The total length of the rope clamp is 1.42", and the groove width is 0.71" to 1.06"..
Application: By folding into the width of two ropes, can clamp one end of the rope with a rope clamp, or fix two ropes together. It can be used totwisted or braided ropes and wire cables, loop stretch cord, dog leads rope, etc. Also great for making your own lead ropes or dock/boat lines, fender lines, DIY custom tie offs..
Features: Rugged and durable, anti-corrosion and anti-rust. these clamps have the grip/spike bit that keeps the rope from sliding out in the center of the clamp..
Really works: Combined with the size of the rope clamp buckle, remember to get the right size for your rope, the clamps will grab and hold the rope very well..
Overall Size:30mm*12mm*14mm/1.18" *0.47"*0.55"(L*W*H).Thread Size:4mm*9mm/0.16"*0.35"(D*L).Fits for 1mm-1.5mm thick rope..
High Quality: Wire rope clips are made of stainless steel 304 for maximum rust resistance and durability..
Perfect Performance: This two bolt wire rope clamp provides a superior level of hold for wire ropes. This slim double design helps prevent snag..
Widely Use: Essential hardware item for heavy-duty rigging rope, wire and cable. Suitable for industrial uses plus aviaries,pets and marine application..
X-BULL SK75 3/8\ x 100ft Dyneema Synthetic Winch Rope with Hook Car Tow Recovery Cable(23,809 Lbs,Orange)
...then of about 23,800lbs. There are different colors such as orange, gray and blue for customer to choose freely..
Features: The dyneema rope of X-BULL is extremely light and can float in water without rotating or being stretched to a large extent..
Further guarantee: The X-BULL dyneema rope consists of 12 fine strand ropes whcich has a black protective sleeve is wrapped on the outermost layer of the rope, and the red protective sleeve in the center is used to determine an accurate and safe range when the winch rope is pulled out. It can effectively provide UV resistance, heat resistance and abrasion resistance, so as to continuously provide longer-term high-quality performance support and protection to prolong the service life of the rope..
Easy use and clean: This type of synthetic rope is easy to handle or splice, it will not fray easily. Compared with the traditional steel wire rope, it is lighter and safer. This synthetic winch rope will not kink like steel wire rope. No more rust and wire splinters make it easy to clean with mild soap and water washing..
Perfect upgrade: This winch rope is not only stronger than traditional wire ropes, but also lighter and safer. Suitable for most winches for SUVs, trucks, ATVs, UTVs, etc. It works flawlessly on mos....
...length. Simple operation and stable performance, providing fast speed and high accuracy..
High Stripping Efficiency: 100 mm, 3000-8000 pcs/h. Cutting the Line Core Cross-Section: 0.1-4.5 mm², Cutting Length: 1 - 9999 mm. Stripped Length: Thread 0-35, line end 0-15 mm. The gearbox leads to fast stripping speed. Hard tungsten steel blade (imported white steel optional) plus the laborsaving design increases security and convenience..
User-Friendly Control: With a microcomputer-controlled clean designed mechanism, this electric wire stripping machine cuts, peels, strips, and twists wire automatically. The direct and easy-to-use interface allows inexperienced users to operate it easily..
Extensive Use: This machine is ideal for whatever hard wire or soft wire, it can be easily stripped by using this model. Such copper wire recycler will detach the plastic and rubber insulation from undamaged scrap wire, a must-have for copper wire recycling..
Fiber Optic Cutter, Thickened Slide Rail 3 in 1 Clamp Fiber Cable Cutting Tool with Hex Wrench for Electrical Repair
STABLE SLIDE RAIL: Using thickened slide rail, which has high rigidity, and the automatic knife return is and not stuck, which is convenient to use..
EFFICIENT CUTTING: The average cutting angle is less than 0.5 degrees, and the 16 sides cutting end face design ensures stable cutting, efficient and reliable..
3 IN 1 CLAMP: This fiber cutter has 3 in 1 clamp design, which can cut 0.9mm pigtail slot, 0.25mm bare fiber slot and 2.5‑3.0mm insulated wire slot..
CNC MACHINING: Manufactured by CNC machining equipment, the fiber cutter has high accuracy and small operating error, with a wide application range..
TUNGSTEN STEEL: The cutting blade is made of tungsten steel, with high hardness, wear resistance and corrosion resistance, has a long service life..