Tektall Intake manifold adapter Replace for TBI 5.7 350 adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 4-barrel Manifold Alloy Durable
【Fitment】 Tektall Intake manifold adapter Replace for TBI 5.7 350..
【Good Quality】 Made from a super durable and heat resistant composite material. This part is far better that a 1/2" or less steel or aluminum spacer.A full 1" thick . Bores match the bores of the throttle body and taper to match a 4 barrel intake without hurting airflow which is a proven way to increase TQ and airflow.Mounting holes to the manifold are slotted for tuning adjustments..
【High performance】 Tektall Intake manifold adapter's bores are tapered in to adapt the wider TBI unit to the narrow Holley edelbrock pattern 4bl manifold. This is very important many adapters don't have this feature. This can cause poor performance that is blamed on the computer, injectors ect. when it is really the adapter..
【Package includes】 1 X Intake manifold adapter, 1 X Gaskets, 1 X Mounting stud kit （Studs, nuts, and washers.） , 1 X Manual..
【NOTE】 Please confirm the item if it matches your machine before you purchase. All Tektall products will undergo strict inspections and strong packaging before shipment.Please rest assured to purchase.Thanks..
Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
Remflex exhaust gaskets fill those gaps permanently.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
Remflex exhaust gaskets fill those gaps permanently.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
Remflex exhaust gaskets fill those gaps permanently.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
【Premium Material】New Universal Boost/Vacuum Manifold. T6061 aluminum billet is processed by high-quality CNC machine tools. The surface is anodized for a durable finish with a high finish. The perfect retrofit accessory, the billet vacuum manifold is a great add-on tuner that requires an extra vacuum source. Wastegate for boost vacuum block.
【6 Port Block Intake】6 1/8" vacuum ports, also with plugs if the tuner doesn't need as many ports. This will relieve all the hassle of splitting the lines and making extra ports if needed, great for hooking up Pressurized controls, gauges and any components that require a separate vacuum source. You can also use tape for fuel and oil requirements..
【Excellent Aftermarket Replacement】Includes 6X 1/8NPT Aluminum Fitting Ports for Boost Controllers, Map Sensors, Fuel Pressure Regulators, Boosters, Exhaust Valves and any other fuel/ignition that requires a vacuum source management components.
【Additional Vacuum Source Required】A billet vacuum manifold is a great add-on tuner, and the design of supercharged cars and single throttle bodies requires multiple vacuum sources. Turbo vacuum ports for automotive vacuum block intake manifolds.
[After-sales guarantee] After you receive the product, if the product ....
Car Turbo Sound Whistle: This gadget can simulate turbo sound of vehicles with turbo exhaust system, make your car sounds more powerful, it will make cool turbo noises while the airflow rushes through the exhaust pipe, great joke gift for your friends and families on birthday and holidays.
Easy Installation: It comes with L spanner and bolts, just need to loosen the bolt and tight it into the tailpipe of your exhaust pipe, then run the car, and it won't hurt your car exhaust pipe.
Universal Fit: This car exhaust sound booster fits most vehicles with straight exhaust pipe, such as cars, motorcycle, truck, dirt bike, scooter, motorbike, and more.
Premium Quality: This universal car turbo sound whistle is made of durable aluminium alloy, anti-rust and lightweight.
What You Get: 1 PC turbo exhaust whistle, 1 PC mini wrench, 1 PC screw, and our 24h customer after-sale service.
Exhaust Manifold Gasket Spring Rebuild Kit with Clamp for Polaris Ranger RZR 800 2008-2010 Replaces 3610047 7041687 7041804 5811511
【Top quality materials】Made of high temperature resistant graphene material. Strong airtightness, can withstand 800-1000 degrees, more durable than the original..
【Why need to replace】Extreme temperatures, oil and coolant contamination, and constant exhaust blockage can wear out gaskets and cause leaks between the cylinder head and manifold..
【Fitment】Replacement for P-olaris Ranger 700 (Does NOT fit Crew or 6x6) 2009.
For P-olaris Ranger 800 Full Size (Including Crew) 2010-2012.
【Replaces part number 】3610047, 5811511, 7041687, 5250091 7041789.
DEWILL Broken Bolt Remover, Stud Extractor Tool to Locks and Removes 1/4-Inch to 1/2-Inch Rounded Studs, Hexagonal Flat - Suitable for Rust, Painted, Damaged Waste Bolts
...t or stud firmly, continue to rotate the stud counterclockwise until it is removed.Then release and separate them in a clockwise direction..
EFFICIENT & VERSATILE - This stud removal tool is easy to operate and can help you get more rest time, whether it is the exhaust manifold, fuel plug, broken bolts, or broken, painted, rusted fastening screws The posts are effectively removed, but the threaded surface may be slightly worn due to the strong clamping force..
TRADITIONAL UPGRADE - Traditional bolt extractors are limited in size, and too many types of extractors waste space and cost. It's too much trouble for your mood, so we designed an auto-adjustable extractor that easily clamp the damaged studs for stripping, saving you valuable time，It is definitely a great addition to your toolbox..
GUARANTEE SERVICE - Provide 100% satisfactory and reliable customer service within 24 hours. If you have any needs, please contact us immediately, we promise to give you a satisfactory answer..
Remflex 2008 Exhaust Gasket for Chevy V8 Engine, (Set of 2)
Chevy V8 - 4.8L, 5.3L, 6.0L LS2 ('99-'08), 5.7L, LS1 LS6 ('97-'08), includes Vortec, Manifold or Headers, 2/Set.
Port configuration comparable to Fel-Pro 1440.
Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
