Best Two Wing Anchor Nut

JackBoss Torin Hydraulic Low Profile Floor Jack 2.5 Ton (5,000 lb) Capacity Trolley Jack with Quick Lift Pump and Portable Storage Case, Red, AS825010CS

  • LIGHT DUTY STEEL SHORE: The Ellis Light Duty Steel Shore is an adjustable support jack that provides temporary or permanant support. This functional and dynamic jack post is the perfect tool for any residential or commercial construction project..
  • EASY TO USE: Simply turn the wing nut to adjust the height. Once the desired height has been reached use a 6mm Allen wrench to tighten the set screw located on the side of the wing nut. This will lock the wing nut into place to keep the shore from further adjustment..
  • SAFE & SECURE: Built with high quality materials, this adjustable support jack is extremely powerful and long-lasting. The light duty steel shore is a perfect solution for sagging floors and foundation issues. It provides additional support in crawl spaces, attics, decks, wood, steel, and concrete beams..
  • SPECIFICATIONS: Weight 44 lb, Range of Adjustment: 85" - 109.
Check Stock

304 Wing Nuts Stainless Steel Wingnut Butterfly Right Hand Thread M5,20PCS

  • This nut has a wing on each side that helps you to twist the nut by hand without any other tools..
  • Easy to install and remove,can be used repeatedly and you can fasten two parts(structures)together easily..
  • Widely used in machinery,petrochemical,telecommunications,chemical industry,construction, electricity, textile, sports equipment,paper,sewage treatment,marine,automotive and other industries..
  • Good quality and great value that better to get them on hand as backup now than wait until the day of the hurricane,the stores will be out of stock and your neighbor's will come by asking to borrow some..
Check Stock

3/8 -16 Wing Nut Type A Light Series/Cold Forged/Steel/Zinc Quantity 1000

  • A nut with wings which allow the part to be manually turned..
  • Cold Forged Wing Nuts to ANSI/ASME B18.17 Specifications.
  • Height from Base to Top of Wing: 0.79" inches.
Check Stock

PAGOW Upgraded Large Slotted Hurricane Wingnut Driver - Wing Nut Drill Bit Socket Tool 1/4 Hex Shank for Panel Wing Nuts Screws Eye C Hook & Q-Hanger Steel

  • This wing nut driver has a big slot with more than 7.5mm (0.3 inch) wide, which's bigger than other wingnut drivers, if you are looking for a big one....
  • Quickly to tighten, just simply turn the wing nut with a power drill. Your impact driver or drill you drive just about any wing nuts bolt or C head....
  • Designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panel, matches with any power drill....
  • A must have for hurricane prone areas, up to 5x faster than you can by hand, save your time when hurricane is coming..
  • Made from CR-V steel, which is highly strong and sturdy for long time use..
Check Stock

Qty 12 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolts, Wall Anchor

  • Required hole diameter equals anchor diameter.
  • variation in hole size can be accommodated by turning the expander nut.
  • the bolt is simply re-inserted and torqued to obtain original holding power (the nut stays in the hole).
  • Bolt can be removed and re-used with a new nut after cleaning and lubricating the threads.
  • strength - the highest shear strength of any expansion anchor.
Check Stock

Chairs Missing

  • ...st experienced, wide load product supplier in the world. Do not take chances out on the road. Haul with Vulcan products, a brand you know you can trust..
  • COMPLETE MARKING KIT TO COVER AN ENTIRE LOAD - This professional grade wide load marking kit is ideal for attaching flags to machinery. It includes (12) heavy duty wing nut magnets and (12) 18 inch x 18 inch heavy duty wire loop flags. The magnets attach to any flat steel surface and accommodate the wire loop flags with a sturdy locking wing nut. Each kit includes (6) orange and (6) red flags for proper marking in any state. Designed for fast set up and breakdown..
  • HEAVY DUTY MAGNETS AND FLAGS - The magnets are secured into the chromed cups with epoxy for heavy duty use and long life in the field. Each magnet has a locking wing nut for extra security, and each chrome cup magnet has 85 pounds of pull on 1/2 inch steel plate. The flags include a Strong 10-gauge wire with a 1/2 inch loop and plastic sleeve for extra durability..
  • REQUIRED IN MOST STATES - Stay DOT compliant and haul safely by properly marking your load, which is required in almost every state. Keeping other motorists aware of your load's perimeter and oversized points is critical to a safe, smooth transport..
Check Stock

Minimprover 35PCS 1/4 -20 5/16 -25 3/8 -16 Wingnuts,304 Stainless Steel Parts Butterfly Wing-Nut Assorted Kit

  • ★ 【Material】: These Wing Nuts were made by high quality 304 stainless steel,it has high hardness,corrosion resistance,oxidation resistance,low temperature resistance and etc.,can be used in humid environments, and do not worry about rust..
  • ★ 【Introduction】: This nut has a wing on each side that helps you to tighten the nut without tools,this item Packed in a plastic box, 100% new, never used.We have distinguished nuts of different specifications with small grids for your convenience..
  • ★ 【Applications】: For machinery and equipment, electronic equipment, communications equipment, hardware lighting, building bridges, furniture decoration, etc..
  • ★ 【SIZE】: Includes 3 most-used sizes——1/4"-20,5/16"-18, 3/8"-16..
  • ★ 【Package Include】: 35PCS Wing-nuts(10pcs 1/4"-20,10pcs 5/16"-18,5pcs 3/8"-16) with a plastic box..
Check Stock

150pc Wing Nuts Assorted Sizes Metric Wing Nut Assortment Set Assorted Wing Nuts Assorted Wingnuts Wing Nut Fasteners

  • Material. 304 Wing Nuts were made of high quality stainless steel. Has high hardness, corrosion protection and anti resistance, strong and durable material ensure life-time use.
  • Size. Butterfly shaped wing-nuts has three different sizes for all purposes: 1/4"-20mm, 5/16"-18mm and 3/8"-16mm which are most used sizes.
  • Usage. Each nut has two wings that allows adjust and tighten element with your hand easily. Can be used to make work faster, adjusting with no stress or damage.
  • Application. Widely used for replacement in industrial and construction, for machinery and equipment, furniture decoration in shops, automotive and homes.
Check Stock

Sutemribor 304 Stainless Steel Lock Nut Assortment 180 Pieces, M3 M4 M5 M6 M8 M10 M12 Nylon Insert Locknut

  • ★ 【Material】: These Wing Nuts were made by high quality 304 stainless steel,it has high hardness,corrosion resistance,oxidation resistance,low temperature resistance and etc.,can be used in humid environments, and do not worry about rust..
  • ★ 【Introduction】: This nut has a wing on each side that helps you to tighten the nut without tools,this item Packed in a plastic box, 100% new, never used.We have distinguished nuts of different specifications with small grids for your convenience..
  • ★ 【Applications】: For machinery and equipment, electronic equipment, communications equipment, hardware lighting, building bridges, furniture decoration, etc..
  • ★ 【SIZE】: Includes 3 most-used sizes——1/4"-20,5/16"-18, 3/8"-16..
  • ★ 【Package Include】: 35PCS Wing-nuts(10pcs 1/4"-20,10pcs 5/16"-18,5pcs 3/8"-16) with a plastic box..
Check Stock

4 Pcs Bed Frame Slat Support Leg, Steel Bed Support Legs, Heavy-Duty Adjustable Height Support feet, Wooden Furniture Foot Legs Replacements (4)

  • Versatility :The bed support legs can protect your bed and mattress from damage or sagging. It is suitable for most bed frames, and the height of the bed legs can be adjusted from 7.2-14.8"..
  • More stable:The bed frame support legs are designed with super heavy-duty bases, and the weight of the bottom seat is 3 times that of other brands. Each support leg can load up to 600 pounds, and the load is twice that of other brands.
  • Material: The legs for bed frame are made of high-quality steel galvanized and are not easy to rust. Super heavy-duty carbon steel base + rubber anti-skid pad design, better grip and will not cause damage and scratches to the floor..
  • Packing included: Each bed legs replacement includes hardware,Extend the screw*1, wing nut*1, Jam nut*2, coupler Nut*1, Phillips Wood Screw*4. installation manual..
  • Important note: Before installation, be sure to use an open-end wrench to lock the base nut.
  • after installation, use a wing nut to lock the top bed claw. As shown in Figure 3..
Check Stock