Best Type Of Attic Insulation

Duct Outlet 12\ x 12\ Ceiling Box, w/ 12\ Round Collar - Connects Register Vent and Diffuser HVAC

  • 26 Gauge Galvanized Steel, Single Wall with No Insulation.
  • Built with standard plaster ground flange all the way around the square portion..
  • Connects a 12" Round Duct to a 12" x 12" Diffuser or Register Vent..
  • The ceiling box is nailed into the attic rafters and plastered or dry walled around the flange called plaster ground..
Check Stock

Duct Outlet 12\ x 12\ Ceiling Box, w/ 10\ Round Collar - Connects Register Vent and Diffuser HVAC

  • 26 Gauge Galvanized Steel, Single Wall with No Insulation.
  • Built with standard plaster ground flange all the way around the square portion..
  • Connects a 10" Round Duct to a 12" x 12" Diffuser or Register Vent..
  • The ceiling box is nailed into the attic rafters and plastered or dry walled around the flange called plaster ground..
Check Stock

Duct Outlet 10\ x 10\ Ceiling Box, w/ 8\ Round Collar - Connects Register Vent and Diffuser HVAC

  • 26 Gauge Galvanized Steel, Single Wall with No Insulation.
  • Built with standard plaster ground flange all the way around the square portion..
  • Connects a 8" Round Duct to a 10" x 10" Diffuser or Register Vent..
  • The ceiling box is nailed into the attic rafters and plastered or dry walled around the flange called plaster ground..
Check Stock

Duct Outlet 16\ x 16\ Ceiling Box, w/ 14\ Round Collar - Connects Register Vent and Diffuser HVAC

  • 26 Gauge Galvanized Steel, Single Wall with No Insulation.
  • Built with standard plaster ground flange all the way around the square portion..
  • Connects a 14" Round Duct to a 16" x 16" Diffuser or Register Vent..
  • The ceiling box is nailed into the attic rafters and plastered or dry walled around the flange called plaster ground..
Check Stock

Duct Outlet 14\ x 14\ Ceiling Box, w/ 14\ Round Collar - Connects Register Vent and Diffuser HVAC

  • 26 Gauge Galvanized Steel, Single Wall with No Insulation.
  • Built with standard plaster ground flange all the way around the square portion..
  • Connects a 14" Round Duct to a 14" x 14" Diffuser or Register Vent..
  • The ceiling box is nailed into the attic rafters and plastered or dry walled around the flange called plaster ground..
Check Stock

Duct Outlet 8\ x 8\ Ceiling Box, w/ 8\ Round Collar - Connects Register Vent and Diffuser HVAC

  • 26 Gauge Galvanized Steel, Single Wall with No Insulation.
  • Built with standard plaster ground flange all the way around the square portion..
  • Connects a 8" Round Duct to a 8" x 8" Diffuser or Register Vent..
  • The ceiling box is nailed into the attic rafters and plastered or dry walled around the flange called plaster ground..
Check Stock

BJTDLLX 12 Steps Wall Mounted Folding Stairs, Attic Steps Pull Down Attic Stairs Retractable Attic Ladder Al-Mg Alloy Loft Ladder Stairs 3m Height Attic Steps with Armrests (Weight Capacity 1000lb)

  • 【Attic Wall Stairs】Wall-mounted attic wall staircases are becoming more and more popular recently due to their simplicity, elegance, practicality, retractability and small footprint. Attic Wall Ladder Stairs meet most people's needs for a stylish and uncluttered lifestyle..
  • 【Wall Mounted】This attic wall ladder is wall mounted, the frame size is 60x70cm (please refer to the picture), the drop-down attic staircase can install the frame on the vertical wall or vertical plane, but cannot be installed on the ceiling and pulled from the ceiling down..
  • 【12 Steps】The 12-step drop-down attic staircase aluminum has a maximum vertical height of 3 meters/9.8 feet and a step width of 43 cm/16.93 inches. Wall Mounted Loft Wall Ladder Stairs can be used with a simple pull down. You can remove steps to lower the maximum height..
  • 【1000lb Load Capacity】The maximum load capacity of wall mounted attic stairs is 1000 lbs, the step ladder can be widely used in attics and cabin tops, making it easier for you to go up and down the stairs (for your safety, please do not stand multiple people at the same time)..
  • 【Aluminum-magnesium Alloy Material】The attic wall ladder stairs are made of aluminum-magnesium alloy material, which is stable in quality, d....
Check Stock

H1499 4 in. Steel Recessed Lighting Housing for Remodel Shallow Ceiling, Low-Voltage, No Insulation Contact, Air-Tite

  • Air-Tite rated design meets restricted air flow code requirements which prevents airflow between attic and living areas and saves on both heating and air conditioning costs.
  • Has four remodel clips which secure the recessed housing and accommodates 1/2 in. and 5/8 in. ceiling material.
  • Compatible with a wide variety of 4 in. low-voltage recessed light trims but is best with Halo 1496, 1493, 1421, 1420 and 1419 series models.
  • NM cable pryouts and conduit knockouts in junction box.
  • Can be installed from below the ceiling in home remodel applications, ideal for those who have limited or no access to their ceiling.
  • For use in non-insulated ceilings or insulated ceilings where insulation is kept at least 3 in. from all sides of the recessed light fixture.
  • 3 "Quick Connect" connectors eliminate the need for separate wire nuts - simply strip supply wires and push in.
  • Listed for damp location when used with dedicated wet rated recessed ceiling lights.
  • Features an integral thermal protector to guard against misuse of insulation materials and improper lamping.
Check Stock

HALO Recessed H36TAT Housing Non-Ic Air-Tite Shallow Ceiling 120-Volt Line Voltage,Green,197

  • Air-tite construction helps prevent air flow from the attic to the living space.
  • 3 in. aperture provides illumination for your general lighting needs.
  • Use for new construction where insulation will be kept 3 in. away from all sides of the housing.
  • Compatible with 120-Volt GU10 lamp (sold separately).
  • Pass-N-thru bar hangers for easy installation.
  • Slide-N-side junction box allows wiring connections to be made outside the box.
Check Stock

Ventamatic XXFIRESTAT 10-Amp Adjustable Programmable Thermostat with Firestat for Power Attic Ventilators, Replacement Thermostat

  • FIRESTAT THERMOSTAT: The Ventamatic Firestat Thermostat controls power attic ventilators. The Firestat Temperature Range is 183°F at which point it cuts off the appliance..
  • ADJUSTABLE THERMOSTAT: The Thermostat is adjustable by the use with a simple screw driver adjustment. It has adjustable bi-metallic switch..
  • ENERGY EFFICIENT POWER ATTIC VENTILATOR: It provides energy-efficient operation of power attic ventilators and the temperature ranges from 50°F to 120°F..
  • REPLACEMENT THERMOSTAT: This Ventamatic Replacement Thermostat controls power attic ventilators to promote the equalization of temperatures inside and outside your attic. Firestat safety feature shuts fan off at 183F Controls up to three units, not to exceed 10 amps..
  • PROGRAMMABLE THERMOSTAT WARRANTY: This thermostat provides 10 years of warranty. It is of opening size 4.8 x 2.5 x 4.8 inches.
Check Stock