Best Ultra tight Tolerances U bolt

(4) Hot Dipped Galvanized Dipped Square U-Bolts (1/2\ D x 2 1/16\ W x 6 5/16\ L) for Boat Trailer

  • U-bolt Size: 1/2" D x 2-1/16" W x 6-5/16 L, thread length: 2-1/2" inches, suitable for 2" x 2" square beams and shafts, (order Please check the measurement size carefully before).
  • Hot Dipped Galvanized : U-bolts are made of Hot Dipped Galvanized,The white surface is a thick galvanized layer, which enhances the rust and corrosion resistance of the U-bolt..
  • You can get: (4) U-bolts, (8) hexagon nuts, (8) flat washers, (8) lock washers, these additional accessories are also Hot Dipped Galvanized. With these, you can spend less time repairing and more time boating.
  • Tips:Use a hand wrench or socket ratchet when installing the nut. Do not use high-speed power tools or impact tools to tighten the nuts..
  • After-sales service: Our U-bolts provide a one-year warranty service. Please rest assured, if you have any questions, please feel free to send us an email via Amazon. We will solve it for you within 24 hours..
Check Stock

Aopin Round U-Bolts 1-1/2 inch 38mm M6 Inner Width 304 Stainless Steel 8pcs Self-Locking Nylon Insert Hex Nuts Flat Washers for Car/Motorhome/Sailing Trailer Replacement Part and Accessorie 4Pack

  • STOP: ONLY USE a Hand Socket Ratchet or wrench to run the nuts up and tighten..
  • DO NOT USE an impact or powered socket driver. Ignoring this instruction will cause U-Bolt Galling / Seizing / Breaking / Failure / Expletives / Sawzall. Let's keep it Fun, and Successful..
  • U-Bolt Size: 1/2" Diam x 3- 1/16" Inside Width x 4- 5/16" Inside Height (Length).
  • Attention: When measuring for Your needed Height (Length), add 1" for the nut and washer..
  • Threading: 1/2"-13 with a thread length of 2- 1/2"..
  • U-Bolts and hardware are made out of 304 Stainless Steel..
  • These U-Bolts will fit on 3" x 3" cross members, such as 3" x 3" box steel..
Check Stock

Upper Bounce Trampoline Safety Enclosure Set including Trampoline Net, 8 Trampoline Poles (with 8 pole caps) Trampoline Pole Foam Sleeves - Fits 12ft Round Trampoline Frame - Installs Inside the Frame

  • Included in the Set: This Upper Bounce trampoline safety enclosure set includes safety enclosure net, 8 heavy duty upper and lower trampoline poles, trampoline pole foam sleeves for poles, 8 trampoline pole caps and 16 u-bolts (2 U-bolts for each pole)..
  • Trampoline Net Poles: This trampoline safety enclosure set comes with 8 heavy duty tarmpoline poles. the trampoline net poles are made from high quality stainless steel which protects the trampoline poles from all types of outdoor weather conditions..
  • Pole Foam Sleeves and Pole Caps: The pole foam sleeves included in this set will protect your kids from getting hurt in case they bump into trampoline poles while jumping. This set also includes trampoline pole caps to cover the top edges of the poles..
  • Net for Trampoline: The trampoline net included in this set installs inside the frame. It is compatible with 12ft round trampolines from any brand out there. This trampoline net is tested for its safety and durability to ensure maximum protection..
  • U-Bolts: A set of 16 U-bolts is provided with this trampoline safety enclosure set. these bolts are used to attach the trampoline poles with the trampoline frame. Each of the trampoline poles uses 2 U-bolts to hold the trampoline poles firmly in place..
Check Stock

Upper Bounce Trampoline Safety Enclosure Set including Trampoline Net, 8 Trampoline Poles (with 8 pole caps) Trampoline Pole Foam Sleeves - Fits 15ft Round Trampoline Frame - Installs Inside the Frame

  • Included in the Set: This Upper Bounce trampoline safety enclosure set includes safety enclosure net, 8 heavy duty upper and lower trampoline poles, trampoline pole foam sleeves for poles, 8 trampoline pole caps and 16 u-bolts (2 U-bolts for each pole)..
  • Pole Foam Sleeves and Pole Caps: The pole foam sleeves included in this set will protect your kids from getting hurt in case they bump into trampoline poles while jumping. This set also includes trampoline pole caps to cover the top edges of the poles..
  • U-Bolts: A set of 16 U-bolts is provided with this trampoline safety enclosure set. these bolts are used to attach the trampoline poles with the trampoline frame. Each of the trampoline poles uses 2 U-bolts to hold the trampoline poles firmly in place..
  • Trampoline Net Poles: This trampoline safety enclosure set comes with 8 heavy duty tarmpoline poles. the trampoline net poles are made from high quality stainless steel which protects the trampoline poles from all types of outdoor weather conditions..
  • Net for Trampoline: The trampoline net included in this set installs inside the frame. It is compatible with 15ft round trampolines from any brand out there. This trampoline net is tested for its safety and durability to ensure maximum protection..
Check Stock

Upper Bounce Trampoline Safety Enclosure Set including Trampoline Net, 6 Trampoline Poles (with 6 pole caps), Trampoline Pole Foam Sleeves - Fits 8ft Round Trampoline Frame - Installs Inside the Frame

  • Included in the Set: This Upper Bounce trampoline safety enclosure set includes safety enclosure net, 6 heavy duty upper and lower trampoline poles, trampoline pole foam sleeves for poles, 6 trampoline pole caps and 12 u-bolts (2 U-bolts for each pole)..
  • Net for Trampoline: The trampoline net included in this set installs inside the frame. It is compatible with 8ft round trampolines from any brand out there. This trampoline net is tested for its safety and durability to ensure maximum protection..
  • Trampoline Net Poles: This trampoline safety enclosure set comes with 6 heavy duty tarmpoline poles. the trampoline net poles are made from high quality stainless steel which protects the trampoline poles from all types of outdoor weather conditions.
  • Pole Foam Sleeves and Pole Caps: The pole foam sleeves included in this set will protect your kids from getting hurt in case they bump into trampoline poles while jumping. This set also includes trampoline pole caps to cover the top edges of the poles..
  • U-Bolts: A set of 12 U-bolts is provided with this trampoline safety enclosure set. these bolts are used to attach the trampoline poles with the trampoline frame. each of the trampoline poles uses 2 U-bolts to hold the trampoline poles firmly in place..
Check Stock

Upper Bounce Trampoline Safety Enclosure Set including Trampoline Net, 6 Trampoline Poles(with 6 pole caps)Trampoline Pole Foam Sleeves - Fits 7.5ft Round Trampoline Frame - Installs Outside the Frame

  • Included in the Set: This Upper Bounce trampoline safety enclosure set includes safety enclosure net, 6 heavy duty upper and lower trampoline poles, trampoline pole foam sleeves for poles, 6 trampoline pole caps and 12 u-bolts (2 U-bolts for each pole)..
  • Pole Foam Sleeves and Pole Caps: The pole foam sleeves included in this set will protect your kids from getting hurt in case they bump into trampoline poles while jumping. This set also includes trampoline pole caps to cover the top edges of the poles..
  • Trampoline Net Poles: This trampoline safety enclosure set comes with 6 heavy duty tarmpoline poles. the trampoline net poles are made from high quality stainless steel which protects the trampoline poles from all types of outdoor weather conditions.
  • Net for Trampoline: The trampoline net included in this set installs outside the frame. It is compatible with 7.5ft round trampolines from any brand out there. This trampoline net is tested for its safety and durability to ensure maximum protection..
  • U-Bolts: A set of 12 U-bolts is provided with this trampoline safety enclosure set. these bolts are used to attach the trampoline poles with the trampoline frame. Each of the trampoline poles uses 2 U-bolts to hold the trampoline poles firmly in place..
Check Stock

Aoje-Link Square U-Bolts 1.97\(50mm) Inner Width M8 Thread 304 Stainless Steel Silver with Plates Nuts Flat Washers for Car/RV/Trailer Bumper, 4Pcs

  • ✩U-Bolts Specification: U-Bolts Diameter (M6) x Overall Width x Overall Height: (5.2 x58 x 50 mm) / (1/4" x 2-1/4" x 1.96"). Groove Width: 38mm / 1-1/2". Perfectly Suitable for Round Tube Size 38mm(1-1/2"). M6 Self-locking Hex Nuts Thread Length: 28mm. With Corresponding Flat Gaskets. Surface Color: Silver..
  • ✩Application: Round U-Bolts Designed for Securing Various Products to Round Wood and Metal Objects. It Is Widely Used In Cars, Boats, Plumbing, Other Home and Industrial Applications..
  • ✩Steps for Usage: 1. Choose the Corresponding U-Bolts Specifications According to the Size of Pipe 2. Drill Holes in the Connection 3. Lock Nut and Flat Washer..
  • ✩Material: High-strength SUS304, Acid and Wear Resistance, Anti-rust, Moisture-proof and Corrosion-proof. No Burr, Smooth Thread. It still performs well in the seaside, rainy and humid environments..
  • ✩Package Content: 4 U-shaped bolts, 8 Self-locking Nuts, 8 Flat Washers, Easy to install, Uniform Force, Strong and Durable..
Check Stock

OBPFY 4 Set 12mm & 14mm Diameter Banjo Hose Barb Bolt Fittings,Metric Thread Banjo Bolt Brake Fitting Adapter with Copper Washers for Motorcycle Car

  • 【Excellent Fittings】* 2 In 1 Set,12mm & 14mm Banjo Barb Bolt Fittings,Designed for excellent engine system fittings.Each component is precision-machined to exact tolerances for trouble-free performance. Long lasting durability,easy installation..
  • 【Application】* Works for Banjo Bolt Inter Diameter 12mm / 14mm. Suitable for Brake System, Air and Fuel Delivery ,Engine..
  • 【14mm Banjo Fittings & Bolt】* Banjo Internal Diameter: 14mm / 0.55".
  • 【12mm Banjo Fittings & Bolt】* Banjo Internal Diameter : 12mm / 0.47".
  • 【Package】* 2 Sets 12mm Banjo Hose Barb Bolt Fittings + 2 Sets 14mm Banjo Hose Barb Bolt Fittings(with 4 X M14 copper spacer + 4 X M12 copper spacer).
Check Stock

Semi Truck Spare Tire (or Tire and Rim) Carrier, Adjustable, Powder Coated, Universal Fit, STAR Fabrication, 3510,

  • Trailer U-Bolt Spare Tire Holder Bracket made of grade 8.8 steel, Zinc Plated, beautiful and practical..
  • U-Bolt Length: 8-1/2'', Width:3-1/4'' - 3-3/4'', Thread Diameter: 7/16-20 UNF, Thread Length: 3''. Fits trailer frames up to 2" or 3" wide.
  • For 4 or 5 lug wheels (bolt pattern: 4 on 4 or 5 on 4-1/2). Thread diameter 7/16-20 UNF..
  • Put bolt around trailer throat and tighten.Tire is mounted along side of trailer protect..
  • The device is very basic, but it fit perfectly around the trailer throat, and also on the tire rim.This carrier easily installs to secure your tires..
  • The kit provides the u-bolt and two nuts. Thread diameter 7/16-20 UNF. Note: Please confirm your tire size..
Check Stock

Evergreen HB10401 Compatible With 96-05 Pontiac Chevrolet Oldsmobile Buick 3.1L 3.4L VIN J, E Head Bolt Set

  • Fits: 96-09 Buick Pontiac Oldsmobile Chevrolet 3.1 3.4 OHV Vin J E.
  • Made From Excellent Quality Materials and Manufactured to The Highest Quality specifications.
  • Design with Exacting Tolerances Increased Durability.
  • Properly Torque Bolts per Manufactures Specifications.
  • Follow Manufacturers Recommended Tightening Sequence, and Procedures For Head Bolt Replacement.
Check Stock