Best Universal Toilet Fill Valve

HTDAK 12 Inch (About 30cm) Toilet Fill Valve Silent Toilet Repair Water Saving Dual Flush Fittings Silent Split Toilet Valve Top Button Replacement Assembly

  • Toilet flush valve: for split toilets with top button, button hole diameter 3.8cm, drain hole diameter 6cm-7cm, measured tank height: 27cm-34cm, with tank cover height: 32cm-40cm.
  • Toilet filling valve: for toilets with bottom inlet, installation thread G15/16, adjustable range according to different tank heights: 27cm-34cm..
  • The double flush valve of the toilet can adjust the water level up and down to achieve full flush or half flush, and save water by adjusting the flush volume to reduce unnecessary expenses..
  • The toilet replacement valve kit is made of stainless steel, high-density carbon particle rubber, and high-quality silica gel: it has anti-corrosion, wear-resistant, rust-proof, leak-proof and other properties, and is suitable for operation under various water pressures and water quality..
  • The universal toilet replacement valve body is simple in structure, easy to replace, and only takes 10 minutes to install. It is easy to clean and maintain, so that your toilet components can continue to run smoothly..
Check Stock

Korky 100BP Ultra High Performance Flapper Fits Most Toilets - Long Lasting Rubber - Easy to Install - Made in USA, Small, Red

  • MOST UNIVERSAL the High Performance Toilet Flapper is the most universal 2 inch flapper available..
  • TOILET FLAPPER VALVE FITS MOST POPULAR 2 inch toilet brands including, but not limited to: American Standard, Kohler, Mansfield, & TOTO – Replaces popular rubber, float-style and rigid frame flappers..
  • MADE IN USA - Toilet parts flapper is proudly made in America and backed by a 5 year warranty..
  • QUICKLY FIX running and leaking toilets and eliminate costly water waste..
  • HIGH QUALITY REPLACEMENT TOILET PARTS: Need to repair or replace toilet parts? Try Korky Toilet Repair because we continue to commit to designing toilet repair parts that are universal to fit the majority of toilets. Designed & manufactured in Wisconsin..
Check Stock

2 Pack 3 Inch Toilet Flapper Replacement Parts Compatible with Lowe s AquaSource 1.28 GPF Toilets 98923 312795 352027 395280 12293

  • Includes Original Fixed Height Fill Valve, refill tube, cone washer, coupling nut, and installation instructions.
  • No adjustments required - fill valve is an exact fit AquaSource toilet models above.
  • Note that in some installations, the fill valve may appear to leak for several seconds after the initial shutoff. This is by design - the gradual....
Check Stock

T Valve for Bidet with Shut-off Valve, T Adapter for Toilet 7/8” X 7/8” X 1/2 or 3/8”, Chrome Bidet Attachment for Toilet

  • NO LEAK STRUCTURE- T-Valve adapter is made of high quality solid brass body, Durability and longevity guarantee, also with brass cartridge, pass 50,0000 on-off testing, you could use it for a life time..
  • EASY TO USE- Brass Shut-off T-adapter for bidet with Single lever design, you can control the water ON-OFF and the pressure..
  • 3-WAY TOILET TEE CONNECTOR- The thread size of bidet shut off valve is G1/2 outlet for handheld bidet shower hose or with adapter for 3/8” bidet toilet seat attachment connection, 7/8” outlet for water Tank and 7/8” inlet for supply water flexible line..
  • SAFETY CARE DESIGN- Please shut off water when not used for safety, even though shut off the valve, the water still could fill the toilet tank, it does not influence using the toilet..
  • T ADAPTER USAGE- This T valve just a toilet bidet parts attachment, can’t use on shower tube and bathroom faucet aerator or other connection..
Check Stock

3 Pieces Water Tank Replacement Kit Include Toilet Flush Lever Handle Universal Toilet Handle Replacement Toilet Flapper Replacement for Toilet Tank

  • Package includes: you will receive 1 piece of water tank inlet valve, 1 piece of universal toilet handle replacement, 1 piece of toilet flapper replacement, rich styles can meet your combination needs.
  • Quality materials: toilet handle replacement is made of metal materials, and the surface is chrome-plated, which is not easy to wear.
  • Toilet flapper replacement is made of rubber and stainless steel chain, reliable and odorless.
  • The water inlet valve is made of plastic and is processed by injection molding, which can serve you for a long time.
  • Scientific design: the rod of the toilet handle is iron-plated, and three wire hanging holes are designed.
  • You can adjust it according to the actual size, can easily rotate it to adjust the water volume.
  • Adjustable design: the flexible frame universal flapper adopts adjustable design, which can handle with city water, hard water and well water.
  • It is also resisting chlorine and gems issues, which suits most American standard toilet water tank.
  • Easy to install: this toilet tank lever handle is compatible with most common toilets with a front mount flush lever.
  • The level fits for square mounting holes, flush lever locknut is equipped with a reversed screw thread to prevent loosening over time.
Check Stock

Danco HYR451T HyrdroRight Universal Water-Saving Toilet Repair Kit with Dual Flush Valve, Lever Handle, White

  • WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Easily converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The permafit silicone seal is also chlorine and chemical resistant and will not warp..
  • ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain..
  • DUAL-FLUSH LIGHT-TOUCH LEVER UNIQUE SPLIT HANDLE DESIGN: The short center lever is the Quick Flush setting that uses significantly lower water volumes for liquids and paper – this setting is needed 4 out of 5 times. The second complete push lever at end is the Full Flush that uses the normal amount of water for solids..
  • COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS. The HYR451T combines two products that together will increase your toilet's efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve..
  • HASSLE-FREE INSTALLATION: Drop-in installation without tools in 5 to 10 minutes - tank removal not required..
  • IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush....
Check Stock

Danco HYR460 Hydroright HyrdroRight Universal Water-Saving Toilet Repair Kit with Dual Flush Valve, Push Btton Handle, White

  • WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Easily converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The permafit silicone seal is also chlorine and chemical resistant and will not warp.
  • ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain.
  • DUAL-FLUSH LIGHT-TOUCH BUTTON UNIQUE SPLIT HANDLE DESIGN: The short center button is the Quick Flush setting that uses significantly lower water volumes for liquids and paper – this setting is needed 4 out of 5 times. The second complete push button at end is the Full Flush that uses the normal amount of water for solids.
  • COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS. The HYR451T combines two products that together will increase your toilet’s efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve.
  • HASSLE-FREE INSTALLATION: Drop-in installation without tools in 5 to 10 minutes – tank removal not required.
  • IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flu....
Check Stock

Toilet Tank Gasket Replacement Kit with 3 Sets Brass Hardware Kits and 2 Pcs Gasket Fits Most 2-Inch/2.5-Inch Flush Valve Opening Toilet Tanks.

  • 【Fits 2" flush valve opening】The 2 inch tank to bowl gasket and hardware Kit is universal to fit most 2 inch two-piece toilet,fits most 2-Inch/2.5-Inch flush valve opening toilet tanks..
  • 【Easy to install】Leaking toilet tank? Fixed a leaky tank with this toilet tank repair kit prefect fit and easy to install,even a non-plumber can install it..
  • 【Package】Tank to bowl gasket kit with 3 sets brass hardware kits and 2 Pcs long lasting rubber gasket fits (2 inch +2.5 inch) for fit flush valve opening..
  • 【Quick installation design】The toilet tank gasket replacement kit adopts a quick installation structure,which can be easily installed without crouching.
  • 【1-YEAR WARRANTY & 30-DAY FULL REFUND POLICY】 Our toilet bowl repair kit with a 1-year warranty,contact us if you are not satisfied with this toilet tank gasket kit for any reason,you may return it without any questions asked within 30-days of the purchase date for a full refund of the purchase price..
Check Stock

Toilet Flush Valves 2-Inch Replacement Valve Kit Assembly for One Piece Dual Flush Drain Valve Repair Compatible with TOTO THU338N

  • 1.UNIVERSAL DESIGN: Flush valve repair kit suitable for most 2-Inch one piece with top push buttom toilet..
  • 2.MEASURE TWO SIZE: This item is only applicable to 2.56"-2.95"(65mm-75mm)(about the size of a baseball) Toilet tank hole Diameter,and it cannot be....
  • 3.DUAL FLUSH WATER-SAVING TYPE: Dual flush water-saving type: for all drainage you can adjust water in the water tank.
  • 4.QUICK AND EASY INSTALLATION: Our toilet drain valve is suitable for most one piece toilets.(not including flapper valve) easy to install in 10....
  • 5.TIPS: Please check the size in the second image before buying. Fit For TOTO THU338 flush valve..
Check Stock

Fluidmaster 400A133 Premium Filling Valve Universal High Performance Toilet Fill Valve - 3 Pack

  • Fix noisy, slow filling valves with the quietest, most powerful toilet fill valve on the market!.
  • Adjustable roller-clamp controls water usage.
  • Replaces outdated, inefficient, or noisy fill valve designs.
Check Stock