Best Upcycled Pla

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Yellow PLA PRO (PLA+) 3D Printer Filament Refill Bundle

  • A 3D Printer accessories combo - 1.75mm Yellow PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Refill Filament Specs: Yellow - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
  • Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm True Red PLA PRO (PLA+) 3D Printer Filament Refill Bundle

  • A 3D Printer accessories combo - 1.75mm True Red PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Refill Filament Specs: True Red - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
  • Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock

AMOLEN PLA 3D Printer Filament, PLA Filament 1.75mm Silk Shiny Filament Red Gold Filament, 3D Printing Filament 1KG/2.2lb

  • PLA SILK SHINY FILAMENT- Good pla silk filament combine silk gold and shiny red, stunning color, print finished will give you an amazing printing object..
  • STRONG COMPATIBILITY-Perfectly compatible with 99% FDM 3D Printer & 3D Pen.Comgrow Creality Ender,ANYCUBIC,Creality 3D,SUNLU,ERYONE,MYNT3D,3Doodler,1.75mm pla filament consistent diameter,dimensional accuracy +/-0.03mm.
  • PREMIUM QUALITY- High quality silk pla filament with high purity and without no bubbles,no jamming,no warping,melt well, feed smoothly, outstanding printing appearance.
  • VACUUM & REUSABLE BAG- Vacuum packaging with desiccant to keep it dry and keep out dust, a reusable bag with sealing strip, pla filament can be put back into bag after used.100% no tangle,machine auto wind,fixed hole steady.a perfect storage condition..
  • HASSLE FREE - AMOLEN is focus on innovative and better quality PLA filament.Defective filament can be reissued or refunded fully.We provide professional 3D printing technical guidance and good 24/7 customer service.
Check Stock

SUNLU PLA Meta 3D Printer Filament High Toughness PLA Meta Filament 1.75mm No Clogging Highly Fluid Fast Printing for 3D Printer,Dimensional Accuracy +/- 0.02 mm,1 KG Spool,Black

  • ①【High Speed Printing & No Clogging】Smooth Squeeze.SUNLU 1.75mm PLA Meta 3D filament(Tolerance Level : ± 0.02mm).1 kg spool (2.2lbs),330m each....
  • ②【Neatly Wound Filament & No Odour】SUNLU has a professional production line with strict control of neatly lined up lines to avoid knots during....
  • ③【Impact Resistance & Energy Efficiency】High toughness and non-brittle PLA Meta printed parts can be sanded, drilled and painted.The PLA Meta....
  • ④【Glossy Surface & Good Adhesion】Brightly coloured PLA Meta filaments bring glossy surface prints to arts, crafts and 3D projects.PLA Meta has....
  • ⑤【Vacuum Packed & No Bubbles】SUNLU PLA Meta 3D printer filaments are all vacuumed sealed along with a desiccant pack.Vacuum packaging to avoid....
Check Stock

AMOLEN PLA 3D Printer Filament, PLA Filament 1.75mm Silk Black Shiny Red Gold Filament, 3D Printing Filament 1KG/2.2lb

  • 【PLA Filament Silk Shiny】- High quality Silk PLA Filament with Silk Black & Shiny Red Gold 3 colors changing. PLA Filament normally around 15-18 meters change color and is excellent for the larger prints to show all colors. The red gold color with shining dots and has shiny appearance, the silk black filament has outstanding silky glossy smooth..
  • 【Premium Quality】- AMOLEN Silk PLA filament Raw materials are from USA. Good shaping, strong toughness, no bubble, no jamming, no warping, melt well, feed smoothly and constantly without clogging the nozzle or extruder. AMOLEN filament, which have premium quality, print Much More Smoothly..
  • 【Clog Free & Print Smoothly】- AMOLEN high quality Silk PLA filament is tangle & clog free. Printing Temperature 200-220℃.
  • Printing Bed (Optional) 0-50℃;Printing speed: 30-60mm/s. NOTE: Please pass the filament through the fixed hole to avoid tangles after use..
  • 【High Compatibility】- AMOLEN Silk PLA Filament is perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, DO3D, MYNT3D, 3Doodler etc. NOTE: Please pass the filament through the fixed hole to avoid tangles after use..
  • 【Reusable Vacuum Bag & After-sales Service】 -- Vacuum packaging....
Check Stock

AMOLEN 3D Printer Filament, Metal PLA Filament 1.75mm with Magnetic, Contains 20% Metal Iron Powder, Apply to Polishing, Matte Black PLA 3D Printing Filament +/- 0.03mm, 1kg/2.2lbs

  • 【Metal PLA Filament with Magnetic】 -- High quality 3D Printer Filament with magnetic, special matte black texture, contain 20% Metal Iron powder. This PLA filament is multifunctional with strong magnetic. Ideal for printing all kinds of little parts, screw, screw cap, chain, they can all be attracted by magnets. The matte black finish with magnetic filament is more widely applicable..
  • 【Apply to Sanding and Polishing】-- 3D Printer Metal PLA Filament are made of high quality raw materials, high density and tough. The matte finish print will show the different polishing effect by sanding with different grits of sandpaper to get a smooth and shiny print. Good shaping, odorless, no bubble, no jamming, no warping. NOTE: Please pass the filament through the fixed hole to avoid tangles after use..
  • 【Multifunctional PLA Filament】-- This Metal Iron Black PLA filament print smoothly and easy to print, with magnetic and suitable for Sanding and Polishing, with heat resistance quality, and corrosion resistance. Extrusion temperature range: 200 - 220℃.
  • Printing Bed (Optional)0-50℃;Printing speed: 30-60mm/s..
  • 【High Compatibility】-- AMOLEN PLA Filament is Perfectly compatible with most of the FDM 3D Printer, MakerBot, LulzBot, FlashForge, UP, Pri....
Check Stock

AMOLEN PLA 3D Printer Filament,PLA Filament 1.75mm Shiny Filament Color Change Purple Blue,3D Printing Filament 1KG/2.2lb

  • 【Color Change PLA Shiny Filament】---The PLA shiny purple blue change at different angles, presenting an amazing color, which is very suitable for printing beautiful objects for display or as gifts.
  • 【Strong Compatibility】---Perfectly compatible with 99% FDM 3D Printer & 3D Pen.Comgrow Creality Ender,ANYCUBIC,Creality 3D,SUNLU,ERYONE,MYNT3D,3Doodler,1.75mm pla filament consistent diameter,dimensional accuracy +/-0.03mm.
  • 【Premium Quality】---High quality pla filament with high purity and without no bubbles,no jamming,no warping,melt well, feed smoothly, outstanding printing appearance.
  • 【Vacuum & Reusable Bag】---Vacuum packaging with desiccant to keep it dry and keep out dust, a reusable bag with sealing strip, pla filament can be put back into bag after used.100% no tangle,machine auto wind,fixed hole steady.a perfect storage condition..
  • 【Hassle Free】---AMOLEN is focus on innovative and better quality PLA filament.Defective filament can be reissued or refunded fully.We provide professional 3D printing technical guidance and good 24/7 customer service.
Check Stock

3D Printing Journal For Men: A Notebook To Keep Record Of Date, Printer, Filament Type & Brand, Model Name, Flow Rate, Print & Bed Temp, Fan, Print & … Notes plus more – Gifts For 3D Modeler

  • 【SILK PLA FILAMENT】 -PLA silk filament is very smooth and shiny, the silky texture, bright colors are focused on this pla filament. There are four colors silk red copper,silk bronze,silk gold and silk silver you can use it to print many beautiful and peculiar object. Silk filament will not disappoint you..
  • 【PREMIUM QUALITY】- Good shaping, strong toughness, no bubble, no jamming, no warping, melt well, feed smoothly and constantly without clogging the nozzle or extruder, silk pla filament, which have premium quality, print Much More Smoothly..
  • 【HIGH COMPATIBILITY 】- Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler. 1.75mm pla filament diameter, accuracy +/- 0.03mm. Stable diameter accuracy offer you a smoothly feeding experience..
  • 【VACUUM BAG】 – Vacuum packaging with desiccant to keep it dry and keep out dust. Transparent plate makes you more easier to check the color and remaining pla silk filament..
  • 【WARRANTY & AFTER-SALES SERVICE】–Amolen is focus on high quality 3D pla filament, defective filament can be reissued or refunded fully.We provide professional 3D printing technical guidance and good 24/7 customer service..
Check Stock

HEVEA Upcycled Place Mat Made from 100% Upcycled Natural Rubber Plant Based, Plastic-Free, Eco-Friendly, BPA-Free (Blue)

  • ???? ANIMAL ILLUSTRATIONS on the mat makes mealtime fun and entertaining. 4 suctions on the back og placemat keeps it in place. Fits most highchair trays ( size 13.8 x 8.7 in).
  • ♻️ The blue upcycled Place mat is completely free from plastic, silicone and similar petroleum based substances and made only from 100% upcycled rubber ???? It means that any leftover or cut out material from our natural rubber production is reused to make new upcycled products. Instead of throwing away the material, we’re giving it new life and thereby minimizing waste. Making our existing sustainable product portfolio even more sustainable! That’s what we proudly call “From trash to treasure”..
  • ???? GIFT-FRIENDLY AND SUSTAINABLE PACKAGING: HEVEA packaging is beautiful and optimised for gifting. We strive to use the most sustainable and environmentally friendly solutions, not just in our production but also with our gift-friendly packaging. This also means that the material used is FSC certified. The FSC trademark on this tube is a guarantee that the paper comes from a responsibly managed forest, which helps prevent deforestation and degradation..
  • ✅ SAFE AND HEALTHY: Our main focus at HEVEA is to provide our loved ones with natural, safe and non-toxic products. In ....
Check Stock

AMOLEN 3D Printer Filament, PLA Filament 1.75mm,Glow in The Dark Multicolor Rainbow, Change Every 5 Meters, 3D Printing Filament +/- 0.02mm,1kg/2.2lbs

  • PLA GLOW IN THE DARK MULTICOLOR - Every 5 meters color change with blue,green,purple,pink, like rainbow in the dark.After exposure to the strong sunlight or UV light for only 30 minutes, the pla filament will have a amazing glow effect. It’s better to print large model,so that all the luminous colors will be displayed.Because the number of glowing color and its glowing effect depend on the printing grams and model..
  • HIGH QUALITY GLOW FILAMENT - Amolen use the most advanced glow materials, PLA raw materials come from USA. 1.75mm pla filament consistent diameter and high dimensional accuracy..
  • VACUUM & REUSABLE BAG: Vacuum packaging with desiccant to keep it dry and keep out dust, a reusable bag with sealing strip, pla filament can be put back into bag after used.100% no tangle,machine auto wind,fixed hole steady.a perfect storage condition..
  • HIGH COMPATIBILITY : Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler. 1.75mm pla filament diameter, accuracy +/- 0.03mm. Don't worry it does not apply to your printer..
  • WARRANTY & AFTER-SALES SERVICE: Amolen is focus on high quality 3D PLA filament, defective filament can be reissued or refunded fully.We provide professio....
Check Stock