StarTech.com PCI Express Serial Card - 16 DB9 RS232 Ports - Low + Full Profile - Multiport Serial Adapter - PCIe Serial Card (PEX16S550LP)
Add 16 RS232 serial ports (DB9) to your low or full-profile computer through a PCI Express slot.
This 16-Port PCI Express Serial Card provides high-speed PCIe serial card with 16 DB9 RS232 ports from a single PCIe slot.
Multiport serial adapter card enables high-speed serial communication with data transfer rate up to 921.6 Kbps.
Compliant with PCI Express 1.0a/1.1 and compatible with 1x/2x/4x/ 8x/16x PCIe bus.
PCIe serial card / Multiport serial adapter card / Serial PCIe card / Serial expansion card / 16 port serial card / pci serial port / pcie serial card / PCI serial card / pci e serial card / pci express serial card.
1.5ft female to female serial null modem cable (7 wire type and full handshaking) connects your computer to device with COM port RS-232 compatible interface.
Wired as a 9 pin serial port Null-Modem cord that 2-3, 4-6, 7-8 line are cross linked (TX,RX,RTS, CTS, DTR,DSR wires are connected).
standard shielded DE9 rs232 cable female to femalewith AL foil.
DB9 female to female connector on each end equipped with screws to ensure an easy and solid connection for stable serial cross data communication.
The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
1.5 feet short null serial adapter f/f for hooking up PC laptop to some old RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.
DTECH DB9 RS232 Serial Cable Male to Female Extension Null Modem Cord Cross TX RX line for Data Communication (10 Feet, Black)
Simple 10ft null modem extension cable (3 wire type and no hardware handshaking) extends a COM port connection between computer and some old device with RS-232 compatible.
Wired as a 9 pin serial cable male to female port cord that 2-3 line are crosslinked (only TX/RX data and signal ground wires connected).
DB9 m/f adapter extender equipped with screws on each end to ensure an easy and solid connection for stable data communication.
The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
10 feet long RS232C cable for hooking up RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.
DTECH DB9 RS232 Serial Cable Female to Female Null Modem Cord Cross TX RX line for Data Communication (5 Feet, Black)
Simple serial null modem cable (3 wire type and no hardware handshaking) extends a COM port connection between computer and some old device with RS-232 compatible.
Wired as a 9 pin serial port Null-Modem cord that 2-3 line are crosslinked (only TX/RX data and signal ground wires connected).
standard shielded DE9 female RS232 cable with AL foil.
DB9 female to female adapter extender equipped with screws on each end to ensure an easy and solid connection for stable serial cross data communication.
The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
5 feet short null serial cord f/f for hooking up RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.
7 Inch Raspberry Pi Monitor Touchscreen Display 1024x600USB Powered Monitor PC Raspberry Pi
This display only supports the Raspberry Pi DSI interface, and the Raspberry Pi can be easily installed on the back of the monitor through 4....
DSI interface 7-inch LCD 800x480 resolution and 5-point capacitive touch screen, display brightness can be adjusted by potentiometer and software PWM,....
Reserve an SSD adapter PCB mounting location for running Raspbain directly from a USB3.0 SSD, or as a high-speed mass storage device as a media....
Integrated with CH340E chip and DB9 male header, RS232 or RS485 function can be selected by DIP switch. The TXD/RXD signal has LED indicators to show....
The display is equipped with 2 damping shaft brackets, the display angle can be adjusted arbitrarily, and the brackets can also be removed to install....
DTECH DB9 RS232 Serial Cable Male to Male Null Modem Cord Full Handshaking 7 Wire Crossover for Data Communication (1.5 Feet, Black)
1.5ft serial null modem serial cable (7 wire type and full handshaking) connects your computer to device with COM port RS-232 compatible interface.
Wired as a 9 pin serial port Null-Modem cord that 2-3, 4-6, 7-8 line are cross linked (TX,RX,RTS, CTS, DTR,DSR wires are connected).
standard shielded DE9 male RS232 cable with AL foil.
DB9 male to male connector on each end equipped with screws to ensure an easy and solid connection for stable serial cross data communication.
The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
1.5 feet short null serial adapter for hooking up PC laptop to some old RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.
DTECH DB9 RS232 Serial Cable Male to Female Extension Null Modem Cord Cross TX RX line for Data Communication (5 Feet, Black)
Simple Serial Null Modem extension cable (3 wire type and no hardware handshaking) extends a COM port connection between computer and some old device with RS-232 compatible.
(Not VGA-CABLE) Wired as a 9 pin serial port Null-Modem cord that 2-3 line are crosslinked (only TX/RX data and signal ground wires connected).
standard shielded rs232 extender cable with AL foil.
DB9 male to female crossover adapter extender equipped with screws on each end to ensure an easy and solid connection for stable data communication.
The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
5 feet short DE9 serial extender cord m/f for hooking up RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.
