Best Usb To Serial Port Driver

Development Board Module Kit Fit for 850/900/1800/1900 MHz GPRS/GSM Antenna, 5~26V

  • ... reason is that the GPRS Shield startup current and the maximum top current required to work up to 2A, but the USB port can not provide such a large current, so the external power supply equipment must be provided..
  • The other power supply port leads to the 3.7--4.5V power supply for lithium battery power supply. The serial port is perfectly compatible. The TTL serial port is compatible with 3.3 and 5V microcontrollers..
  • Make sure your SIM card is not locked. The best baud rate for GPRS Shield communication is 19200 BPS 8-n-1 (GPRS Shield automatically matches baud rate by default). Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world..
  • GPRS multi-slot class 10/8. GPRS mobile station class B. Compliant to GSM phase 2/2+. Class 4 (2 W @ 850 / 900 MHz). Class 1 (1 W @ 1800 / 1900MHz). Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands. Short Message Service - so that you can send small amounts of data over the network (ASCII or hexadecimal)..
Check Stock

Handspring Visor Serial Hotsync Cradle (Graphite)

  • HotSync serial cradle for your Handspring Visor.
  • Compatible with Windows 95, 98, and NT and Mac OS 7.5.3 or later.
  • Replaces or complements the USB HotSync cradle that comes with the Visor Deluxe.
Check Stock

Module,Development Board Module Kit,5~26V SIM Development Module,Fit for SIM900 850/900/1800/1900 MHz GPRS/GSM,Quad-Band 850/900/ 1800/1900 MHz - Would Work on GSM Networks

  • ... reason is that the GPRS Shield startup current and the maximum top current required to work up to 2A, but the USB port can not provide such a large current, so the external power supply equipment must be provided..
  • The other power supply port leads to the 3.7--4.5V power supply for lithium battery power supply. The serial port is perfectly compatible. The TTL serial port is compatible with 3.3 and 5V microcontrollers.Speaker and Headphone jacks..
  • The best baud rate for GPRS Shield communication is 19200 BPS 8-n-1 (GPRS Shield automatically matches baud rate by default).Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world..
  • GPRS multi-slot class 10/8.GPRS mobile station class B. Compliant to GSM phase 2/2+. Class 4 (2 W @ 850 / 900 MHz).Class 1 (1 W @ 1800 / 1900MHz).Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands..
  • Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal).Embedded TCP/UDP stack - allows you to upload data to a web server.RTC supported.Selectable serial port.Low power consumption - 1.5mA(sleep mode)..
Check Stock

KEYESTUDIO Mega Plus 2560 R3 Board for Arduino with Type-C USB Cable, 1.5A Output, More Powerful MCU Contoller Board

  • This Mega Plus board can work like the Arduino Mega R3 2560 but it is more powerful and has more pins.
  • The USB-to-Serial chip of this board is stable and compatible CP2102.
  • Up to 5V, 1.5A output, can drive drive high-current devices like servo and motor.
  • Additional SPI communication interface, IIC communication interface, Serial communication interface(4 channel).
  • Serial2 (D17 is RX2, D16 equals to TX2), Serial3 (D15 is RX3, D14 is TX3), D0 and D1 are connected to MCU.
  • The yellow text on black board makes identifying pinsets a breeze. FCC and CE is available.
  • How to use: Search for "keyestudio wiki KS0499" in Google Chrome to get the wiki online tutorial for this product. Technical supports are available at any time!.
Check Stock

Qwiizlab USB 3.0 to HDMI DVI Adapter 1080P@60Hz Video Converter Supports Windows 7/8/10/11 Only

  • COMPATIBLE OPERATING SYSTEM - ONLY support Windows 11 / 10 / 8.1 / 8 / 7, DO NOT support macOS, ChromeOS, Windows XP or Windows Vista..
  • DRIVER INSTALLATION - MUST install driver before use. Find it in the disk named "FL2000DX" in "This PC" on your Windows computer and install it. If you failed to find or install the driver, please refer to Qwiizlab official website for assistance..
  • EXTEND MODE SETUP- ONLY support extend mode A-B-B in Windows. DO NOT support A-B-C in Windows. Windows settings, select Start > Settings > System > Display to setup multiple displays and resolution..
  • FULL HD VIDEO ADAPTER - Mirror or extend the screen of your computer to two monitors through HDMI port in [email protected] resolution (if adapted from USB 3.0 port) or 800*600 pixels resolution (if adapted from USB 2.0 port), and DVI port [email protected] resolution (if adapted from USB 3.0 port) or 800*600 pixels resolution (if adapted from USB 2.0 port)..
  • CONSTANT CONNECTIVITY - Require no extra power supply when using it..
Check Stock

MKS GEN L V1.0 Controller Board 3D Printer Kit Mainboard Ramps1.4 Dual Extruder Touch for 3D Printer Accessories

  • Support a Variety of Stepper Drivers -- 2560 and Ramps 1.4 are integrated in the board, which avoids the problem of complicated connectors and malfunctioning. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100, available to change the stepper drivers and motors as users like..
  • Reserve External Driver Signal -- available to connect external high-current driver to drive the 57 and 86 stepper motors. Use high-quality MOSFET, better cooling effect and more stable. Use specific power chip, support 12V-24V power input, and resolve t..
  • Use CH340 Serial Port Chip -- Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing. Use CH340 serial port chip, more easily install the drive than 16U2..
  • Support 24V Input -- The heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats. Run Marlin firmware, the configuration is completely same as Ramps 1.4..
  • Compatible With -- Support Ramps 1.4, 2004LCD,12864LCD, TFT28 and TFT32. X-axis, Y-axis and Z-axis with different color terminal controls the stepper motors and endstops, which is convenient to wire..
Check Stock

Gearmo 4 Port RS232 to USB FTDI chip Adapter with RX and TX Status LED

  • MULTI-USE FUNCTIONALITY - Quad Port Serial Adapter with FTDI Chipset, that supports an automatic handshake. Supports full RS232 Handshaking.
  • COMPATABILITY - With support on multiple OS platforms this makes our USB RS- 232 very versatile. Supported OS platforms are Windows 7, 8 and 10 as....
  • EASY INSTALLATION - This serial adapter lets you enjoy simple installation and operation with COM port retention that provides robust serial....
  • EASY TEST - Easy test RS-232 host to device link. With a full LED, dual color display, tester output. This will make testing your connections with....
  • WHY Gearmo? Your Trusted Partner based in the USA, Providing Advanced Engineering, Highly Reliable and Superior Built Products to handle the most....
Check Stock

Letotech Cross Wired USB Serial Cable FTDI ft232r USB RS232 to DB9 Female Adapter Null Modem Cable PC Control TV Cable (Null Modem pinout)

  • USB to Null Modem (Cross-Wired) RS232 Serial Adapter.ftdi usb serial null moldem DCE adapter cable for upgrading the old version desktop DB9 - DB9 cross wired null modem cable.
  • usb rs232 to db9 female adapter cable,Add a Null Modem RS232 serial port to your laptop or desktop computer through USB.
  • This cable is mostly specially used in PC(host) - PC(host) communication, also called null modem cable.
  • This cable also can be used for PC control the TV, smart TV(as nowadays the TV is a computer).
  • Length: 6ft Up to 921.6M RS232 transfering speed..
Check Stock

Panasonic Toughbook CF-53 MK1/MKII Port Replicator (CF-VEB531U)

  • Compatible with Panasonic Toughbook CF-53 Rugged Notebook.
  • HDMI Port x 1, VGA Port x 1 and Serial Port x 1.
Check Stock

Generic Brand for CISCO CAB-V35MT 1OFT 72-0791-01 V.35 Male DTE Serial Cable L5294 FT4-8839

  • USB C cisco console cable is to help those who have a PC or laptop and want to use a USB-C connection to connect the console port with their Cisco modem,router,firewall,switch or other serial based Cisco device. This is the exact cable to solve such problem..
  • USB Type C to RJ45 for Cisco Router Console Cable, Works great for tables Type-C USB port directly to a console port like a charm..
  • FTDI FT232R chip + RS232 Level Shifter, Compatible with any laptop/PC with a USB-C Port..
Check Stock