No jigs required - sharpening port has precise and repeatable bevel angle settings of 20°, 25°, 30° and 35° for chisels and plane irons up to 2" Wide. Achieve a perfect 5° micro-bevel for fast re-honing..
Powerful 1/5 HP motor - with 580 rpm speed has routed air flow and a heat sink cooling system to sharpen blades fast without blade damaging heat. This low-rpm wheel maintains speed regardless of load for improved consistency, so whether your specialty is custom furniture, cabinetry, or old-fashioned wooden toys.
Accessories available - you can attach a wide variety of standard six-inch, adhesive-backed abrasive disks to these wheels, making it easy to select the grit you need for rough grinding or fine honing. And with two glass wheels, you can always have four different....
Lippert 191023 JT's Strong Arm Fifth-Wheel Jack Stabilizer Kit
ELIMINATES CHASSIS MOVEMENT — The JT’s Strong Arm Stabilizer Kit is designed to eliminate chassis movement in your 5th wheel RV or travel trailer using the same engineering as a race car chassis.
EASY INSTALLATION — With no welding required, this system can easily bolt-on to your landing gear and RV’s frame for a one-time installation.
THREE CONFIGURATIONS — Available in three sizes: Standard 5th Wheel Kit, Short 5th Wheel Kit and Travel Trailer.
COMPATIBILITY — This stabilizer kit was designed to work with most major RV jack assemblies — including, scissor, front landing gear and telescoping.
FULLY EQUIPPED — Kit comes complete with inner tubes, outer tubes and all necessary mounting and installation hardware.
RV fifth-wheel jack stabilizer kit comes complete with everything needed for DIY installation.
Designed to eliminate side-to-side and front-to-rear RV movement and shaking.
Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying.
The kit was designed for installation by your dealer or the do-it-yourself on fifth-wheel RVs with 58 inches or greater distance between the two front landing gear legs.
Cheesea Retro Bike Headlight Tail Light Kit 12V 6W Motoriaed Bicycle Lamp with Generator Dynamo
The friction generator head light kit fits most bicycles.
Front light: 12x8x8cm(4.72x3.15x3.15"), Tail light: 4.5x2.4x2.4cm (1.77x0.94x0.94").
Dynamo output: 12v 6w, There are 2 connectors on one end of the generator. The little nub that says 12V-5.5W connects to the front headlights. The....
Put your generate electricity lamp to install it to your bicycle front fork or Bicycle Carrier after install front headlight and taillight.
Press your bicycle lamp on wheel when you need to use it ,put the power head of generate electricity lamp coincide with the wheel ,then Can drive the....
WEN DF475T Dual Fuel 120V/240V Portable Generator with Electric Start Transfer Switch Ready, 4750-Watt, CARB Compliant
Switch between gasoline (4750 surge watts, 3800 running watt) and propane (4350 surge, 3500 running) with the simple turn of the selection dial.
Voltage easily goes from 120V to 240V, perfect for transfer switches and emergency backup.
Electric start powers the 224cc 4-stroke OHV engine with the turn of a key.
4-gallon tank provides up to 11 hours of half load run time.
Includes two 120V GFCI outlets (5-20R), a 120V/240V NEMA 30A twist lock (L14-30R), a 12V DC cigarette-lighter-style plug, a bottle of oil, a wheel and handle kit, a 47-inch LPG connection hose, and a 2-year warranty.
1set V Type Black AM8 3D Printer Aluminum Extrusion Metal Frame Full Set with Rubber Foot, Nuts Screw Bracket Corner for Anet A8 Upgrade (V type)
V Type is a generic 2020 rail and can compatible with Normal 2020 Extrusion hardware and accessories. The only difference is the V Type slot angle which allows for adding V-Wheels.
AM8 3d printer aluminum extrusion frame kit- Pre-tapped.
Package: please check the product description as the following.
Orion Motor Tech 8x170 Wheel Spacers, 2" Blue Wheel Spacers with M14x2 Studs Compatible with Ford Super Duty F250 F350 & Excursion 1999-2014, 130mm Wheel Spacer Kit, Set of 4
SAFE AND SECURE: This Orion Motor Tech 8x6.7 (8x170) automotive wheel spacer kit improves the cornering, stability, handling, and control of your vehicle by adding 4 inches to its axle track.
PREMIUM MATERIAL: These wheel adapters are made from solid blocks of T6 aircraft-grade aluminum to keep them lightweight but highly durable and strong.
the 32 Dacromet-coated M14x2 bolts included are 7-10 times more corrosion resistant than the competition.
SUPERIOR DESIGN: Unique slots on the rear face of these car wheel spacers allow easier removal, reduce damage during use, and give you a longer service life.
WIDE COMPATIBILITY: This wheel adapter set is compatible with Ford Excursion and Super Duty F series trucks from 1999 to 2014.
see above for the complete fitment list of Ford Excursion, Ford Super Duty F250 & F350, 1999 Ford F250, and more!.
1 YEAR WARRANTY: Increase your axle track and stability today with your peace of mind assured by Orion Motor Tech's strong 2 year warranty and usual friendly customer service.
7.3L Turbo Compressor Wheel & Upgraded GTP38 Rebuild Kit for Garrett TP38 1994-2003 Ford Powerstroke 446579-0001 170293-360° Thrust Repair Kit - 7.3L Turbo Rebuild Kit By TOPEMAI
7.3L Turbo Compressor Wheel & Upgraded GTP38 Rebuild Kit For 1994-2003 Ford Powerstroke,Replaces 170293,446579-0001, 817-1004-002F,....
7.3L Turbo Compressor Wheel Rebuild kit for 2003 Ford E-350,2003 Ford E-350 Club Wagon,2003 Ford E-450 Super Duty,2003 Ford E-550 Super Duty,2000-2003....
7.3L Turbo Rebuild kit for 1994-1998 Ford F-250,1994-1997 Ford F-350,2000-2003 Ford F650,2000-2003 Ford F750,1994-1997 Ford F Super Duty,1999-2003....
Turbo Compressor Wheel kit for ford AKA gtp38 turbo compressor kit,Gtp38 turbo upgrade,7.3 turbo wheel,Garrett tp38 turbo rebuild.This Kit Has a 360....
Package Include:7.3L Turbo Compressor Wicked Wheel, Upgraded 360 Degree 5 Oil Port Brass Thrust Bearing, Thrust Collar, Thrust Spacer, Front and Rear....
