[Working Temp.]: The product operates in ambient temperature:5℃~40℃ It is equipped with thermal protection function. If the room temperature is too or the voltage is too high, the product may stop working..
[Oil Anti Flow-Back Design & Environmental Design] - The gas inlet is specially designed to prevent oil form flowing back, preventing the container and hoses from being polluted.
The tank has separating devices at the exhaust port to prevent oil spraying and to reduce pollution.
[Easy start design With Alloy Aluminum Casing] - Motor is made from allow casing which has good heat dissipation to keep the pump running efficiently and for a longer life.
It starts easily even in cold temperatures.
Anti-Vibration - An electrometric coupling insert between the motor and module results in an extremely quiet and low vibration running condition..
[Application]: They are extremely useful in refrigeration repair, medical appliances, printing machinery, vacuum packing, gas-analysis, and hot-forming plastics..
Buchner Funnel, 13cm I.D. - Polypropylene, 2 Parts - Designed for 11-12.5cm Filter Paper - Eisco Labs
2 PARTS || Büchner funnel with straight sides, two interlocking parts and a perforated filter plate is made of high quality polypropylene.
SEPARATION || For use in filtration (separation of solid matter and fluid) - Two parts combine forming a vacuum seal which does not require greasing.
USE 11 - 12.5CM FILTER PAPER || Filtration paper required but NOT included - Best with 11 to 12.5cm filter paper - Moisten filter paper with a liquid to prevent initial leakage.
MEASUREMENTS || Funnel stem measures 85mm (3.3 inches) with an inner diameter of 20mm (0.8 inches) - Fully assembled funnel measures 210mm (8.25 inches) in length with an inner diameter of 130mm (5.1 inches).
MULTIUSE || Often used in combination with a Büchner flask (CH0422C01), Büchner ring and sinter seals.
PITAKA Case for AirPods 1&2 [AirPal Mini] Wireless Charging Case Slim-Fit Shockproof Aramid Fiber Cover and Skin
[Double-Sided Wireless Charging] With a built-in lightning connector, simply plug your Apple AirPods into the case to wirelessly charge on any....
[Crafted from Aerospace-grade Materials] Made from 100% premium aramid, a synthetic fiber used in aerospace and performance automotive industries..
[Form-fitting Design] The vacuum forming process allows the slim, minimalist aramid fiber cover to snuggly fit your Apple AirPods, retaining its....
[Enhanced Protection] The highly durable case offers resistance to impact and scratches, protecting your Apple AirPods case from everyday knocks..
[Portable and Stylish] The removable carabiner clip allows you to attach your AirPods case to your bag or belt loop for convenient access when you're....
PITAKA Thin Case Compatible with iPhone 12 Pro 6.1 [Air Case] Selected 600D Premium Aramid Fiber Carbon Look Simple Design Phone Cover
[High-Quality Materials] Made from -grade aramid fiber, the Air Case Compatible with iPhone 12 Pro protects from and tear. Raised bonded rings provide....
[Comfortable Grip and Feel] PITAKA¡¯s vacuum forming process leaves a smooth-textured surface pattern on the case that provides additional grip and....
[Perfect Fit] The form-fitting, minimalist design of the Air Case emphasizes the shape of your phone while allowing access to its features..
[Light & Slim] Weighing only 0.35oz and measuring just 0.025 inch, the Air Case protects your phone without unnecessary bulk..
[Product Package] Package includes 1 x Air Case Compatible with iPhone 12 Pro 6.1"..
Fits: Walther PPQ M2 with Olight Baldr Mini – AIWB (Appendix Inside the Waistband) – IWB Holster (Inside the Waistband) Handmade, made to order, in the USA! Carry Comfortably, Confidently, and Covertly..
Comes ready for Optic/ RDS (Red Dot Sight). Allows clearance for for taller sights. Closed bottom to prevent lint and other objects from entering the holster..
Fts belts up to 1.50″ with adjustable angle. Includes extra hardware to adjust retention for the perfect fit. The Concealment Claw helps push the grip inward to increase concealment..
MIE Productions uses membrane-less vacuum forming using CNC molds! Made with slim, lightweight, 0.080 Kydex that is strong and durable. Holds its shape for safety and easy re-holstering..
Features a full sweat guard that Fully covers the trigger and backside of gun providing a safe smooth snag free draw and helps prevent sweat on your gun slide..
Zak Designs Shells 14 oz Double Wall Vacuum Insulated Thermal Kids Water Bottle, 18/8 Stainless Steel, Flip-Up Straw Spout, Locking Spout Cover, Durable Cup for Sports or Travel
SIZE & MATERIAL: This Zak water bottle holds 14 ounces and measures 4.3 by 2.8 inches wide and 7.3 inches tall. It's made from food-grade, 18/8 stainless steel, which is durable and BPA free..
VACUUM INSULATED: The water bottle has vacuum insulation to keep drinks cold for up to 12 hours. The double-wall construction also prevents condensation from forming on the outside, eliminating messy water rings..
HYGIENIC SPOUT COVER: Keep the spout clean in the house or while you're traveling--the spout cover protects contact surfaces and has a flip-up lock to keep it closed. When it's time to drink, the action lid allows one-handed operation, and the spout easily pops up at the push of a button..
BUILT-IN-CARRYING LOOP: The lid has an integrated loop, so this travel water bottle is easy to take on the go. It also fits in most car cup holders, and won't leak when the spout cover is closed and locked, so you can put it in a bag without worrying about mess..
LIFESTYLE: Zak Designs water bottles make hydration fun with cute beach artwork! The drinkware is fully reusable--no more disposable bottles--and an exciting addition to the daily routine..
Buchner Funnel, 7.5cm - Polypropylene, 2 Parts - Designed for 5-6cm Filter Paper - Stem Length, 6cm - Lightweight, Autoclavable - Eisco Labs
2 PARTS || 7.5cm Büchner funnel with straight sides, two interlocking parts and a perforated filter plate is made of high quality polypropylene.
SEPARATION || For use in filtration (separation of solid matter and fluid) - Two parts combine forming a vacuum seal which does not require greasing.
5-6CM FILTER PAPER NEEDED || Filtration paper required but NOT included - Best with 5-6cm filter paper - Moisten filter paper with a liquid to prevent initial leakage.
MEASUREMENTS || Funnel stem measures 60mm with an inner diameter of 8.7mm - Fully assembled funnel measures 145mm in length with an inner diameter of 72.5mm.
MULTIUSE || Often used in combination with a Büchner flask (CH0422C01), Büchner ring and sinter seals.
Cen-Tec Systems 94192 Quick Click 16 Ft. Hose for Home and Shop Vacuums with Multi-Brand Power Tool Adapter for Dust Collection, Silver, Feet
The soft molded TPE fitting measures 1. 00" on the inner diameter and has four concentric rings to hold firmly to the power tool. For power tools with a female connection the 1. 00" soft TPE part measures 1. 40" on the outer diameter. The soft rubber like feel and taper of the fitting insures a positive tool forming fit.
Includes a second bayonet with a soft molded TPE fitting that measures 1. 50" on the inner diameter with three concentric rings to hold firmly to the power tool even when carrying a substantial flow of debris in the air stream. The fitting measure 1. 90" on the outer diameter. The soft TPE allows the fitting to form to the shape of the exhaust port off of the selected power tool.
The inner collar and acetal clip ring are designed to fit tools directly that accept a quick click collar connection. The collar connector is 1. 75" on the outer diameter with the acetal clip designed to snap into place on power tools fitted for this feature.
Designed to fit most major brands of power tools and work shrouds including Skil Bosch, Ryobi, Makita, Dewalt, Festool. Fein, Cobalt, Porter Cable, Hitachi and Milwaukee Electric.
The tank end is designed to fit all major brands of home shop vacuums including Shop Vac, Vacmaster, Ridgid, Craftsman, D....
PITAKA Ultra Thin Case Compatible with iPhone 13 Pro Max 6.7 Inch [Air Case] 600D Premium Aramid Fiber Minimalist Phone Cover Carbon Fiber Look
[Compatible Model] Only Compatible for iPhone 13 Pro Max-6.7 inch. (*Note: This is NOT a magnetic case.).
[Premium Material] Made from selected 600D aramid fiber which we reserve only for premium products, this case protects from daily scratches and....
[Ultra Light & Slim] With a thickness of only 0.02 in and a weight of 0.37oz, the thin, lightweight phone case still protects your phone and sdd no....
[Precise Cutouts] The form-fitting case takes a half-pack cutting design on the top and bottom. Opened button cut allows easy access to each button.....
[Excellent 3D Grip] Our unique vacuum forming process creates sleek but not slippery experience..
GREAT FOR HOT AND COLD: The double-wall construction ensures both hot or cold drinks can be kept at optimum temperature for longer. It can keep your drinks cold for 24 hours and hot for 12 hours..
LEAKPROOF VERSATILE DRINKING: Threaded handle lid easily opens and closes for a leakproof seal. Handle lid makes it easy to carry your favorite beverage and stay hydrated for your on the go lifestyle. Its stainless steel rivets allow the strap to move easily as you go about your day. Wide mouth opening is great for adding water, ice, and making it super easy to clean..
DURABLE CONSTRUCTION: Made of high quality food grade 18/8 stainless steel, double wall vacuum-sealed construction which helps to prevent condensation from forming on the outside of the tumbler. Features a silicone rubber grip that is comfortable to hold..
EASY TO CLEAN: Designed for easy and convenient cleaning. Top rack dishwasher safe lid, hand wash body..
CAR CUP FRIENDLY: The bottle stands 11.02" tall and has a diameter of 2.87" which makes it the perfect size to fit in standard size cup holders..
