1/4\ Brass Electric Solenoid Valve 110VAC Normally Closed VITON
Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
This highly responsive valve will open and close in less than 1 second when actuated.
meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....
1 Brass Electric Solenoid Valve 110VAC Normally Closed Water Diesel.
Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
This highly responsive valve will open and close in less than 1 second when actuated.
meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....
3/4 Brass Electric Solenoid Valve 24VDC N.C Air Water Fuel VITON
Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
This highly responsive valve will open and close in less than 1 second when actuated.
meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....
3/4\ Brass Electric Solenoid Valve 12VDC N.C. Air Water Fuel VITON
Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
This highly responsive valve will open and close in less than 1 second when actuated.
meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....
Hromee Tire Valve Stem Tool Puller and Installer Kit, 4PCS TR413 Tubeless Snap-in Valve Stem with Valve Stem Cores, Single Head Valve Core Remover and Slotted-Head Valve Cap
OFF-SET HEAD - Unlike other straight heads, Hromee valve stem remover and Installer is designed with a off-set and pivoting head, more convenient and easier to use. There is the thread inside the swivel head for screwing into cap that makes you install and remove valve stems without removing the valve core. The pivoting head is for optimal angle..
PROTECTIVE DESIGN - On the handle part knurled finish steel is designed for increasing friction and ensure safety while using. The rubber bumper is for protecting wheel and rim from damage. 12.6-inches long to provide more leverage necessary to remove stubborn valve stems with less effort. This remover and installer definitely a good helper for changing the valve stem..
TR413 VALVE STEM - Snap-in rubber car tire valve stems for tubeless 0.453” (11.5mm) diameter rim holes. Outside EPDM rubber is for ozone resistance. Apply for 65 PSI max cold inflation pressure and max rim thickness of 0.156”. fits cars, light trucks, small trailers, wheelbarrows, lawn mowers, ATVs, and motorcycles..
Slotted-Head Valve Cap - 2 Pieces of valve remover caps are equipped in this kit. 2 in 1 valve caps are made of premium material, strong and durable to use. The top slot head can be used to remove valve cores and the bottom can....
WADEO Valve Core Remover Tool HVAC with Dual Size SAE 1/4 & 5/16 Port, 20 PCS Valve Cores with Teflon Seal, 5 PCS Brass Nuts and Valve Core Rod, Compatible with R410A R32 R22 R12 R407 R404 R600
Wide Application: Suitable for home refrigeration equipments, dual size sae 1/4'' & 5/16'' port makes the valve core remover tool be compatible with R410, R22, R12, R407, R404, R32 A/C air condition system, etc. (Not suitable for Automotive AC).
Easy to Install: Use this hvac valve core remover tool, the valve core rod makes it be easily inserted into the inner valve core to control the valve core. you don't need to stop the machine and release the refrigerant. Note: Before removing the valve core, close the valve of the valve core wrench and disconnect the air conditioner inner connection..
Upgraded Valve Cores: The bottom of our valve cores are golden yellow, strong resistance to fluorine and heat, has longer service life than ordinary valve cores.
Great Design: This hvac tools are mainly made of brass, it has a ball valve that can be opened and closed in just a quarter-turn. (No Gas Loss). Anti-slip design increase hand friction, prevent all kinds of overpowered valves.
High-quality craftsmanship probes, rugged and durable, suitable for most equipments. ality craftsmanship probes, rugged and ....
Valve Core Removal Tool Set,40Pcs Copper nickel-plated Schrader Valve Cores ,20Pcs O-ring Seal Valve Stem Caps, 3 Pieces Dual Single Head Valve Core Remover Tool Tire Repair Tools
Package Include : 40Pcs Copper nickel-plated schrader valve cores,20Pcs with rubber-ring Seal valve stem caps,2 x Single Head Valve Core Remover,1 x Dual Head Valve Core Remover Tool.
Valve Cores: Manufacture of valve cores is fully automated, and all Schrader valve cores are 100% leak-tested. Our fully automated manufacturing allows us to offer zero-defect products.Use of nickel-plated cores prevent galvanic corrosion..
Valve Tools: Handy tool designed to easily tighten or remove valve cores on bicycles, cars, trunks,and any other air filled tires..
Valve Caps: Airtight, Leakproof Seal –tire valve caps feature rubber O-rings that create a tighter, more effective seal, so there’s no air leaking on long, tough drives..
These schrader valve cores is used in any car, truck, motorcycle, bicycle, ATV,and more..
LGOUW 8 Pieces Premium TR413 Tubeless Tire Valve Stems, Black Rubber Snap-in Tire Valve Stem, Universal for Tubeless 0.453 inches 11.5mm Rim Holes
Package content: you will receive 2 pieces of dually valve stem extenders, 6 pieces of metal valve stem extenders, and 1 piece of valve core removal tool, the sufficient quantity and complete combination can meet your daily demands.
Solid and sturdy: these valve stem extenders sets are mainly made of brass, aluminium alloy and rubber, with smooth and chrome-plated surface, and nice strength, not easy to rust, corrode or deform, offering a long service life, and the bottom of the extension piece rotates smoothly, which is easy to operate, convenient and efficient.
Suitable size: the straight valve stem extension measures about 6 inches in length, and the metal valve stem extenders are available in 3 different degrees, including 45 degree, 90 degree, 135 degree, the valve core removal tool features 2-size and 3-angle tips, suitable for most common tire valves.
Simple to apply: the valve removal tool can be applied to remove the old valve core, then insert the new valve core onto valve core tool and insert it into tire valve stem, then screw down until tight, will not take you too much time to complete the work.
Wide compatibility: this set of truck tire valve extension is well compatible with most cars, pickups, truck, ride on mowers, ATV, motorcycles, bic....
1/2 Brass 12V DC Electric Solenoid Valve Normally Open Air Water NBR
Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
1/2" Brass direct acting with NBR gasket..
This highly responsive valve will open and close in less than 1 second when actuated.
meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..
Ice Maker Water Valve 241803701 242252603 240519601 For Frigidaire Refrigerator New
Actual #’s on valve: 242252603 RIV-11AE 8F-140319.
Angled valve bracket is easily bendable with pliers.
Refrigerator Water Inlet Valve,This valve will fit most brands such as Frigidaire, White Westinghouse, Tappan, Gibson, Kelvinator, Sears, & Kenmore.
It is a single solenoid valve with a 1/4″ inlet & outlet which is standard. This valve has the new “John Guest” style fitting which allows you to just push the waterline directly into the valve from the ice maker. It’s that easy and no leaks! The other end will have the standard 1/4″ compression fitting that your supply line will hook to. This valve will work with most all refrigerators that have the freezer on top or bottom. It will NOT work with a refrigerator that has a water filter built in.
