Best Valve For Gas

LYUTON, 2PCS Memory Foam Travel Pillow, Comfortable Neck Pillow, U Shape Pillow with Eye Mask & Earplugs (2, Grey)

  • ...table Neck Pillow is made of High plush fabrix material to provide maximum comfort, soft and comfortable, durable, and no chemical smell.Support your neck, keep your head upright and keep your neck comfortable..
  • 【Easy to Inflate, Deflate and Store】It is an inflatable neck travel pillow. It has built-in inflation valve and outlet gas valve for you to inflate and deflate. How to inflate: close the outlet gas valve and open the leakproof device, then press the inflated valve repeatedly for about 30-60s, finally close the the leakproof device. It can keep the fully filled status for several days without air leakage.
  • How to deflate: just open outlet gas valve..
  • 【Ergonomics】Adjustable inflation level and softness, This comfort inflatable neck travel pillow is perfect for all sleeping positions. According to the ergonomic design which pursues comfort, the support of the neck is strengthened. with adjustable double buckle, free to adjust the neck size and keep neck pillow in place around your neck, give your head, neck & lumbar comfortable support, sleep comfortable..
  • 【Multifunction】This travel pillow allows you to relax and rest anytime and anywhere when traveling by plane, car, train or bus! Adjust this pillow to firm, medium or soft to fit y....
Check Stock

BrassCraft CSSL45R-72 P Safety PLUS Gas Appliance Connector with 3/8 OD EFV and 1/2 MIP x 1/2 FIP x 72

  • 1/4 In. ID (3/8 In. OD) x 72 In. corrugated stainless steel connector with corrosion resistant coating.
  • Safety+PLUS Excess Flow Valve helps protect against gas fires and explosions - 1/2 In. MIP connection to gas supply or gas ball valve.
  • Approved for indoor and outdoor use. 100% Leak Tested.
  • Use with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures.
  • CSA certified. Designed, machined & assembled in the USA.
Check Stock

MENSI Propane Gas Fireplaces Fire Pits DIY Safety Replacement Part Pilot Burner Assembly for Propane Igniter Kit M8x1 Thermocoupler with OD 4mm Copper Tube Connection

  • Safety pilot kit with ignition 2.8*0.5mm Flat terminal for Igniter & thermocouple sensor M8*1 end thread for valve 900mm.
  • With stainess steel gas collecting box protect the flame to be extinguished and more efficient for ignition sparks.
  • Designed for Fireplaces & Fire pits for propane gas (compare the size before ordering).
  • This can be a DIY gas appliance and easy install with necessary nuts, Each connection should be connected well so can work perfectly.
  • Attention: 900mm pilot gas tube included with M8X1 Olive Nuts for gas valve pilot port. 4mm diameter Copper tube.
Check Stock

4 Way Gas Distribution Co2 Distributor Manifold With 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves for Homebrew Beer Making Brewing Tool

  • ???? Gas Manifold, Machined from a single piece of aluminum with built-in check valve protects your shunt and prevents gas backflow..
  • ???? Designed with a 2-point screw hole on the top for easy installation to other equipment. 5/16″ threaded ports barbed inlet and 5/16″ barbed outlets..
  • ???? The distributor allows you to split the gas supply into multiple lines. Each line has its own shutoff valve. Chrome Plated valves with spring loaded Ball check valve. Run with 4 lines from one CO2 source..
  • ???? Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi. You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg.).
  • ???? Made of prime aluminum, brass and stainless steel material, which is extremely durable. MONEY-BACK GUARANTEE -customer satisfaction is our #1 policy!. If you are not satisfied with our product or if you experience any issues, Please contact us.
Check Stock

Idol Pleasures

  • 【POWERFUL PROPANE WEED BURNER TORCH】Compared to other propane weed torch, our weed burner torch Constructed of stainless steel and copper, This propane burner can stand burning of high temperature flame. The dual adjustment system of flow valve and turbo-blast trigger allows you to control the flame with one hand for easy operation, 24-inch length design and Ergonomic anti-slip handle Can be avoiding crouching and Hand fatigue. 3-different torch nozzles for maximum compatibility..
  • 【WIDELY USE – FLAME THROWER】Portable propane torch weed burner Perfect for burning Yards, gardens, concrete cracks, weeds in driveways.
  • heat metal castings, asphalt and roofing materials.
  • melt ice snow off steps, sidewalks, driveways.
  • remove paint, grease, plastic from metal, concrete and other non-flammable objects.
  • 【EASY TO USE – PROPANE WEED TORCH】①: Connect the weed torch up to any refillable propane tank.
  • ②: slowly loosen the gas tank valve and check for leaks.
  • ③: Slightly loosen the propane blow torch flow valve and ignite directly at the nozzle.
  • ④: adjust the blow torch flow valve to reach the desired temperature. ⑤ notice: After use the propane weed torch, close the gas tank valv....
Check Stock

Sunrise Natural Gas Burner Valve + Knob Replacement for Commerical Range

  • Package includes: you will receive 4 pieces gas grill control knobs, enough quantity and convenient for your replacement.
  • Size information: designed to fit D-shape grill valve shaft, the insert size is approx. 0.354 inch/9 mm in length and 0.275 inch/7 mm in width, suitable for most gas grill stove.
  • Note: please make sure the insert size before purchasing.
  • Easy to install: you just need to install the product corresponding to the D valve position to accomplish installation.
  • Durable material: made of quality plastic with shiny chrome plated finish, fit for your stainless steel grill well and can be applied for a long time.
  • Nonslip silicone ring in middle of the control knob, soft and easy to grip.
  • Wide application: the gas grill control knob can be applied to many applications, such as most gas and electric stoves, ovens and ranges, also suitable for campers, camping appliances, etc..
Check Stock

Hisencn Drop-in Fire Pit Kit 36 x 12 Inch, Fire Pit Insert H Burner with Spark Ignition and Propane Hose Kit for Propane Fire Pit, Fire Table Insert, Indoor or Outdoor Decorative Fireplace

  • ... to prevent it bend during the transportation..
  • 【Package Upgrade】- Fire pit kit includes 1x Fire pit pan and 1 x fire pit insert H burner. ►Propane hose kit includes 5 feet regulator hose, 4 feet connect hose. ►Fire pit gas burner spark ignition kit includes stainless steel mounting plate, 1/2" shut-off ball valve, 1/2" air mixer valve, 1/4 Chrome Qtr-Turn key valve with 3" key and spark Ignitor (battery not include) with leads & ground wire..
  • 【Thoughtful Design】 - Not whistling noise, all of our flame holes are precession drilled not punched so the gas can flow smoother and create better flame. ►The holes at the bottom will drain water and prevent water from accumulation. ►The iron box collects gas for easy ignition. ►Complete accessories and easy to install into your fire pit..
  • 【Used for Indoor Outdoor Decorative Fireplace】- All of this are suitable for propane gas or natural gas (Need to buy a extra natural gas hose). ►Use with decorative fire pit glass or fire logs to make your fire pit more advanced and brilliant firelight effect. We recommend 40 pounds of fire glass or gas fireplace logs..
  • 【Best Gifts for Friends】 - The propane fire pit insert kit is a great choice as a gift for dad, mom or friends. ►Wherever you ....
Check Stock

Coleman RoadTrip Swaptop Aluminum Grill Griddle, Full Size , black

  • [REFILL ADAPTER]: With this adapter, you can transfer the liquefied gas from one lindal valve cylinder to another lindal valve cylinder..
  • [VENT VALVE]: Empty the gas tank to recycle/dispose..
  • [MATERIAL]: Super Duralumin, Brass, Rubber..
  • [SIZE AND WEIGHT]: Folded: 1.8x1.4x0.6in(45*16*35mm), unfolded: 3.7x1.4x0.6in(94*16*35mm), weight: 0.07lb/36g. It is lightweight and easy to carry..
  • [PACKAGE MCLUDE]: Only 1xZ15 Adapter. The rest of the products in the picture are not included..
Check Stock

Reliance Hot Water Heater Gas Control Valve 100112336 1\ Cavity Thermostat Compatible with Reliance, State, A.O. Smith, and American branded heaters

  • PLEASE PROVIDE MODEL AND SERIAL NUMBER OF YOUR WATER HEATER IF YOU NEED US TO DETERMINE CORRECT GAS VALVE PART NUMBER!.
  • Gas control valve is compatible with all A.O. Smith manufactured products including A.O. Smith, Reliance, State, and American branded heaters.
  • Temperature control assembly 100112336 supplies the burner with gas to heat the water.
  • Returning part because you purchased on that doesnt fit your heater is not allowed! Please confirm it fits by messaging us..
  • A service technician is recommended for the repair to ensure the gas supply line is leak free.
Check Stock

Oxygen MAPP Torch Kit With Pressure Meter With Tank Support, Glasses And Flint Spark Lighter(Gas Cylinders Not Included)

  • SELF-PRESSURE MEASURE| The gas valve equip pressure gage on it, you can working without extra pressure gage.
  • Come with Cylinder Stand Rack X1, Flint Spark Lighter X1, Glasses X1 (gas tank is not included!!)).
  • 100% ANTI-BACKFIRE| The fire won't back to the gas tank since the safety design of the valve, extreme safe.
  • SECOND VOLVE ON THE HANDLE| Convenient to gas adjustment on handle.
  • HIGH TEMPERATURE| Up to 6432℉ (3000℃).
Check Stock