FANOVO R134A A/C Refrigerant Freon Charge Hose with Gauge Set BPV31 Bullet Piercing Tap Valve Kits R134a Can to R12/R22 Port AC 1/2 Replace Universal Retrofit Valve Kit for AC/HVAC System (Gauge A)
...ATERIAL: Made of high quality metal with great rust-resistant and anti-leaking performance. The hose is made of rubber,good pressure resistance, safe to use.both of the kit are made of corrosion-resistant metal that won't wear out or rust over time, and anti-leaking design that will be safer for you.
BULLET PIERCING VALVE KITS：BPV-31 Refrigerator Tap Valve Compatible with 1/4 Inch, 5/16 Inch, 3/8 Inch Outside Diameter Pipes, Replace for AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31，A practical kit and convenient for you to use，Each kit including 1 piercing valve, 1 hex key, 2 adapters.
AC U CHARGE HOSE: R134A charging hose uses rubber nylon resin material hoses, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Max working pressure is 500PSI and burst pressure is up to 350PSI. Total length is 19", ideal for easy to reach AC suction service port, for example the AC connector is right on top of your engine compartment.
EASY TO INSTALL: you just need to install bullet piercing tap valve by the hex key in the package, the installation process will not take up too much space, easy and convenient, using bullet piercing tap valve can effectively avoid accidental discharge of refriger....
Hromee Tire Valve Stem Tool Puller and Installer Kit, 4PCS TR413 Tubeless Snap-in Valve Stem with Valve Stem Cores, Single Head Valve Core Remover and Slotted-Head Valve Cap
OFF-SET HEAD - Unlike other straight heads, Hromee valve stem remover and Installer is designed with a off-set and pivoting head, more convenient and easier to use. There is the thread inside the swivel head for screwing into cap that makes you install and remove valve stems without removing the valve core. The pivoting head is for optimal angle..
PROTECTIVE DESIGN - On the handle part knurled finish steel is designed for increasing friction and ensure safety while using. The rubber bumper is for protecting wheel and rim from damage. 12.6-inches long to provide more leverage necessary to remove stubborn valve stems with less effort. This remover and installer definitely a good helper for changing the valve stem..
TR413 VALVE STEM - Snap-in rubber car tire valve stems for tubeless 0.453” (11.5mm) diameter rim holes. Outside EPDM rubber is for ozone resistance. Apply for 65 PSI max cold inflation pressure and max rim thickness of 0.156”. fits cars, light trucks, small trailers, wheelbarrows, lawn mowers, ATVs, and motorcycles..
Slotted-Head Valve Cap - 2 Pieces of valve remover caps are equipped in this kit. 2 in 1 valve caps are made of premium material, strong and durable to use. The top slot head can be used to remove valve cores and the bottom can....
3 Pieces Set A/C R134A Refrigerant Charging Hose R134A Charging Hose Quick Couple, 1/2 in Male 1/4 in SAE Female Can Tap Valve, BPV31 Bullet Piercing Tap Valve Compatible with GPV14 GPV31 GPV38 GPV56
Package information: 3 pieces set in total, come with 1 piece R134A charging hose with gauge and 2 pieces BPV31 bullet piercing tap valve kit, each kit includes 1 piece piercing valve, 1 piece hex key and 2 pieces adapters.
R134A refrigerant charging hose: the length of charging hose is approx. 59 inch/ 149.8 cm, charging hose comes with pressure gauge for easily viewing during use, pressure gauge scale is 0 – 200 PSI, the 1/2 inch end fits R12, R22, R502 fittings,the R134a can tap is only suitable for R134A refrigerant of vehicle or home air-conditioning.
BPV31 bullet piercing tap valve: it can replace part model of AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31, it is compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
About material: the bullet piercing tap valve is made of corrosion-resistant metal mainly, not easily worn out or rust, the refrigerant charging hose is made of rubber material mainly, it is resistant to high pressure.
Easy to install: you just need to install bullet piercing tap valve by the hex key in the package, the installation process will not take up too much space, easy and convenient, using bullet piercing tap valve can effectively avoid accidental discharge of refrigerant.
FVRITO 200x50 8 X 2 Tire and Inner Tube for Razor E100 E125 E150 E200 E200S Power Core E100 Dune Buggy ePunk PowerRider Launch 360 Electric Scooter with Bent Valve Stem Set of Two
200x50 8" X 2" Electric Scooter Replacement Tire and Tube: Fits most popular electric scooters on the market - Razor Electric Scooter E100(Front),....
200x50 Tire Made of advance tire compound employed material.
this 200x50 Tire & Inner Tube Set is Designed to replace 8-inch electric scooters, universal front and rear wheels.With rubber grooved surface....
Package Include:2 X Inner Tube,2 X Tire,2 X Red Stem Valve caps,2 X Black Stem Valve caps,1X valve core wrench,2 X brass Valve Stem Cores.
please check for the details and size to make sure this part will fit..
GRAPHICS & MORE Harley Quinn Character Motorcycle Bicycle Bike Tire Rim Wheel Aluminum Valve Stem Caps
VALVE STEM CAPS: Put rubber to the road in style. Our high-quality red aluminum valve stem caps will add some eye-catching bling to your motorcycle or bike rims! These resin-topped air valve covers help keep your tires inflated at the proper level on bikes, and motorcycles..
EASY GRIP: Includes two (2) easy-grip individual valve stem caps. Fits Schrader type valves only. Each valve stem cap is .55" (1.4cm) tall, and the resin encased design is .375" (.95cm) in diameter. Design as shown..
HIGH QUALITY CONSTRUCTION: Made from machined aluminum, our durable weather-resistant stem covers are designed with an ergonomic grip, and integrated rubber O-ring for an air-tight fit..
OFFICIALLY LICENSED: Batman products sold by Graphics and More are guaranteed authentic, high quality and officially licensed by Warner Bros. Proudly printed in the USA. BATMAN and all related characters and elements & TM DC Comics (s19).
Wheel Locks Anti Theft, M12 x 1.5 Thread Size Chrome Cone Seat Wheel Locking Nuts Set of 4 and Wheel Lock Key Pouch
【FIT】:For vehicles with wheel studs requiring M12x1.5 thread and wheels that with cone seat..
【STABLE MATERIAL】: Steel material, anti-oxidation, not easy to rust, wear-resistant, durable, long service life.
【WITH TOOL PACKAGING POUCH】: Store other tools such as-Spare Valve Stems, Valve Stem Caps, Lug Nut, Wheel Center Caps, Pocket Screw Driver and much more!.
【ANTI-THEFT NUT】：It can only be disassembled with a special key, effectively avoiding the tire being stolen.Installation is simple and only takes a short time to complete.
【INCLUDING】:4 wheel locks,1 key,1 wheel lock key bag,whick can help you easily hide the wheel lock key anywhere in the car and will not be lost. You can also use it to store other tools to prevent loss..
Content & Size: You will receive 4pcs tire valve stem caps with the length of 45mm/1.78inch and the diameter of 1cm/0.39inch, which are enough for your daily needs and replacement. Due to the long size of these tire caps, please disassemble them before entering automatic car wash equipment..
Premium Material: Made of high-quality aluminum alloy material, wear resistant, sturdy and durable. These heavy duty valve stem caps are air proof, dust proof and weather proof, possessing excellent oxidation resistance, sturdiness and durability. You can use them without any worry..
Stylish Appearance: Our valve stem caps are designed into fantastic sharp tower shape, which makes your cars or bicycles more special and eye-catching. Looks very cool and stylish!.
Easy to Use: It's very easy to screw these personalized tire caps onto the valve stem of cars, SUVs, trucks, motorcycles, bicycles, etc. The knurled patterns on the surface increase the friction when installing and unloading, which can well prevents slipping..
Strong Practicality: The tire valve caps effectively protect and extend the service life of tires and ensure your safety when driving. If you have any problem about our products, you can ask us for timely assistance..
Graphics and More Man Pooping on Toilet Funny Tire Rim Wheel Aluminum Valve Stem Caps
VALVE STEM CAPS: Put rubber to the road in style. Our high-quality black aluminum valve stem caps will add some eye-catching bling to your ride! These....
EASY GRIP: Includes four (4) easy-grip individual valve stem caps. Fits Schrader type valves only. Each valve stem cap is .55" (1.4cm) tall, and the....
HIGH QUALITY CONSTRUCTION: Made from machined aluminum, our durable weather-resistant stem covers are designed with an ergonomic grip, and integrated....
SIZE DETAILS - Each valve stem cap is .55" (1.4cm) tall, and the resin encased design is .375" (.95cm) in diameter..
All creative internal designs apply. In other words unlicensed..
Onwon 12 Pieces Snap-in Rubber Tire Valve Stems TR412 11.5mm 0.453 Inch with High Temperature Brass Valve Cores Tyre Valve Stems for Tubeless Rim Holes on Standard Vehicle Tires
[Keep Tires Inflated] - Use the Snap-In Short Black Rubber Valve Stem 12-Pack for Tubeless 0.453” Inch 11.5mm Rim Holes on Standard Vehicle Tires to keep your tires inflated at a steady air pressure level and easily check PSI quickly..
[Good Quality Tire Valve Stem] - Ozone tested and leak tested, these tire valve stems are manufactured from EPDM rubber and equipped with high temperature brass valve cores..
[Abundant Tyre Valve Stems] - 12 pack black tyre valve stems are enough for your spare or replacement.
A good accessories for car owners or professional mechanic..
[Rubber Valve Stem with a Cap] - The cap of this rubber valve stem can give your wheel a stylish new look and help in keeping the tyre inflated..
[Bolt-in Design] - These rubber tire valve stem with bolt-in design, easy and convenient to install and hold the pressure good.
2.75/3.00-19 2.75x19 2.50-19 70/100-19 Inner Tube for Honda CRF 100F 125FB 150F 450R Kawasaki KX 100 250 500 250F 450F Yamaha Off Road Motocross Motorcycle Dual Sport Adventure Trail Pit Dirt Bike
Inner Tube 2.75/3.00-19 with Straight Valve Stem, Compatible with a 19" rim,It Will Also Fit : 2.50-19 , 2.50x19 , 2.75-19 , 2.75x19, 3.00-19 , 70/100-19.
Straight Valve Stem With Red Aluminum Stem Valve cap,please check for the details and size to make sure this part will fit.
Made From Premium Rubber and Built To Last: Made with premium-quality, heavy-duty rubber, these inner tubes are highly durable and ideal for home, professional and commercial / industrial use.
Package Include:2 X Inner Tube,2 X Red Stem Valve caps,2 X Black Stem Valve caps,1X valve core wrench,5 X brass Valve Stem Cores.
