6 Inch Dually Valve Stem Extenders - 2 Pack - Easy Install, Heavy Duty, Straight Metal Dual Wheel Valve Stem Extensions for RV Tires, Truck, Motorhome, Coach, Pickup, Ram 3500, Trailer, OEM Grade
(2 Pack) MAKE DUALLY TIRE PRESSURE CHECKS A BREEZE! Forget fighting with your inner dual wheel tire valves every time you want to check your tire pressure or top them off. Just install 6″ dually tire valve stem extensions and make tire pressure checks a QUICK & PAIN FREE job! INCREASE YOUR SAFETY on the road with regular tire pressure checks – now so fast and effortless with your new 6″ solid valve extenders..
UNIQUE HEX HEAD TIP FOR EASY INSTALLATION – Other leading brands use a round swivel base which makes for a frustrating and time-consuming chore as you fight to tighten them in such a confined and awkward space. Our unique air valve stem extensions are made from PREMIUM nickel plated solid brass and feature a 3/8″ hex nut at the top for INSTALLATION IN SECONDS with a deep wall socket or wrench. Job done!.
DESIGNED FOR HEAVY LOADS – OEM Grade with high temperature valve cores and rated up to 150 PSI makes these schrader valve stem extensions PERFECT for all dual wheel vehicles including RVs, motorhomes, coaches, buses, trucks, trailers and pickups such as Ram 3500 & F-350. UPGRADE your rig today and get back on the road faster with these TIME SAVING and FRUSTRATION FREE extenders..
2 Pack BPV31 Bullet Piercing Tap Valve Kits Compatible with 1/4, 5/16, 3/8 Inch Outer Diameter Pipes and R134A Air Conditioning Refrigerant Charging Hose with Gauge, Connect to R12/ R22 Port Only
Sturdy material: made of corrosion-resistant metal, won’t wear out or rust over time, a convenient replacement part for you to use.
The hose adopts quality rubber material, good pressure resistance and reliable.
R22 R12 charging hose: 19 inch in length, only can be applied with home refrigerator adding refrigerant, come with gauge for easily viewing during use, connect to the R-12/ R-22 service port for easy conversion.
It fits only those cans with the thread of 1/2 inch.
BPV-31 bullet piercing tap valve: replace part No.: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31, also compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
Package includes: 2 packs BPV-31 bullet piercing tap valve kits (each kit including 1 x piercing valve, 1 x hex key and 2 x adapters) and 1 piece R22 R12 charging hose with gauge, 3 pieces in total.
Easy to use: you only need a hex key wrench (included) to install this part.
Its compact design only requires 2 inch clearance area for installation and use.This system refrigerant charging pipe with built-in safety valve to prevent accidental venting of refrigerant.
FVRITO 12.5x2.75 12.5x2.5 12.5x3.0 (12-1/2x2-3/4) Inner Tube for Razor MX350 MX400 Dirt Rocket X-Treme X-560 GT-200 EZIP E-500 E-750 E-900 E-1000 electric Scooter 47cc 49cc Mini Pocket Dirt Pit Bike
12.5×2.75/2.50 inner tubes fit 8-1/2″ rim size Wheel, they also Will fit tire sizes 12.5 x 2.25 (12 1/2×2 1/4 ) ,12.5×2.5(12 1/2×2 1/2 ) , 12.5×2.75 (12 1/2×2 2.75 ), 12.5×3.0 ,12 x 2.40 ,12 x 2.75，please check for the details and size to make sure this part will fit..
for Razor Dirt Rocket MX350 MX400, X-Treme X-560, eZip E-500 E-750 E-900 E-1000 ,Freedom 942, 943, 946, 959,GT GT-350, GT-500,HCF Pacelite HCF 707,IZIP I-650, I-750 (24 Volt),Mongoose M350, M500, Z350,2 Stroke 47cc 49cc Pit Dirt Bike and other scooters with same size tire.
TR13 Straight Valve Stem With Red Aluminum Stem Valve cap.
Made From Premium Rubber and Built To Last: Made with premium-quality, heavy-duty rubber, these inner tubes are highly durable and ideal for home, professional and commercial / industrial use.
Package Include:2 X Inner Tube,2 X Red Stem Valve caps,2 X Black Stem Valve caps,1X valve core wrench,5 X brass Valve Stem Cores.
Heavy Duty Cutting Torch, Oxygen Propane/Acetylene Welding Torch, Flame Torch Handle & Cutting Attachment with Propane Tip
【HIGH PERFORMANCE】This cutting torch is mainly used to finish heavy duty work. With this kit to cut metal with thickness 1/8-inch to 5-inch and weld up to 3/8 inch, can easily finish the work ..
【MULTIPLE GAS OPTIONS】 Cutting torch and handle are ready for multiple gas options.
Oxy-Acetylene, propane or other fuel. 2 fittings on the handle mix up oxygen and combustible gas through standard hose (inner Dia.6mm) to get cutting flame . The cutting nozzles may be different depends on the gas you are using.
【HIGH QUALITY AND STABILITY】Adopts pure brass valve, stainless steel pressure handle, integrated adjustment handwheel and stainless steel stem to offer longer lifespan and higher precision . Built in non-return valve , more safety to use it ..
【FULL SET】Full kit include torch handle，cutting torch and propane torch tip. Total assembled length 16inch (40mm), handle length 4.2 inch, which is very convenient to finish welding and cutting work..
【WIDELY APPLICATION】Widely used in workshops, mechanical maintenance, cutting metal and welding ..
3 Pieces Set A/C R134A Refrigerant Charging Hose R134A Charging Hose Quick Couple, 1/2 in Male 1/4 in SAE Female Can Tap Valve, BPV31 Bullet Piercing Tap Valve Compatible with GPV14 GPV31 GPV38 GPV56
Package information: 3 pieces set in total, come with 1 piece R134A charging hose with gauge and 2 pieces BPV31 bullet piercing tap valve kit, each kit includes 1 piece piercing valve, 1 piece hex key and 2 pieces adapters.
R134A refrigerant charging hose: the length of charging hose is approx. 59 inch/ 149.8 cm, charging hose comes with pressure gauge for easily viewing during use, pressure gauge scale is 0 – 200 PSI, the 1/2 inch end fits R12, R22, R502 fittings,the R134a can tap is only suitable for R134A refrigerant of vehicle or home air-conditioning.
BPV31 bullet piercing tap valve: it can replace part model of AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31, it is compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
About material: the bullet piercing tap valve is made of corrosion-resistant metal mainly, not easily worn out or rust, the refrigerant charging hose is made of rubber material mainly, it is resistant to high pressure.
Easy to install: you just need to install bullet piercing tap valve by the hex key in the package, the installation process will not take up too much space, easy and convenient, using bullet piercing tap valve can effectively avoid accidental discharge of refrigerant.
Mudder 5 Pieces BPV31 Piercing Tap Valve Kits U-Charging Hose Refrigerant Can Tap with Gauge R134a Can Connect to R12/ R22 Port AC 1/2 and Universal Retrofit Valve with Dust Cap
Package content: 3 pieces BPV-31 piercing tap valve kits (each kit contains 1 piercing valve, 1 hex key and 2 adapters), including R134a u-charge hose....
Easy to install: our BPV-31 piercing tap valve kits come in compact design that only requires a 2-inch clearance area for installation and use, and....
R134a Charging hose with gauge : 24 inch hose with R-134a can, it is a good air conditioning conversion adapter kit, it's completely applied to....
Replace model of BPV-31 piercing tap valve: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.
Compatible with 1/4 inch, 5/16 inch, 3/8 inch....
Universal retrofit valve: the retrofit valve converts from R-12 to R-134a air conditioning system and suit for 7/16 inch low side port.
Piercing Valve Kits with Dust Cap Converts R12 to R134a Fit 7/16 Inch Low Side Port BPV-31 Piercing Tap Valve Replace for AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31
Package includes: you will receive 1 pack BPV-31 kit (including 1 piercing valve, 1 hex key, 2 adapters) and 1 pack universal retrofit valve with a dust cap, a practical kit and convenient for you to use.
compatible with: compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
Universal retrofit valve: the retrofit valve converts from R-12 to R-134a air conditioning system and suit for 7/16 inch low side port.
Suit for vehicles pre-1994, comes with R-134a refill fittings.
Easy to use: BPV-31: just screw it on then it's okay.
BPV-31 piercing tap valve: you only need hex key wrench (included) to install this part.
Its compact design only requires a 2-inch clearance area for installation and use.
Durable material: both of the kit are made of corrosion-resistant metal that won't wear out or rust over time, and anti-leaking design that will be safer for you.
Capacity: 1 Liter - Size: 7'' x 9'' - Material: 2 mil Tedlar PVF film - MADE IN USA.
Our Tedlar bags utilize a patent pending 2-in-1 fitting. By combining a shut-off valve and Teflon-lined septum, you are able to fill the bag and remove the sample for analysis with one fitting. The stem is used to connect 1/8” ID tubing for filling and emptying the bag. The septum can be used for removing the sample using a syringe. Fittings are available in polypropylene, stainless steel, and Teflon..
Guidelines: 1. Store Tedlar bags in a clean area away from potential contamination sources. 2. Tedlar bags are designed for use at atmospheric pressure. Over pressurization (003e2 psi) can cause the bags to burst. 3. Always ensure the bag, fitting, and tubing materials are appropriate for the compounds being sampled. 4. CEL Scientific does not recommend reusing Tedlar bags in most cases..
To fill the bag: 1. Connect the appropriate tubing (1/8” ID) from a sampling source to the stem on the side of the fitting. 2. Open the valve by holding the stem and turning the top portion of the fitting counterclockwise one turn. 3. When the bag is full (approx. 90% capacity), close the valve by holding the stem and turning the top portion of the fitting clockwise until it is finge....
Weber 66754 Set of 2 Lighted Main Burner Control Knobs for Genesis II LX (Model Years 2017 and Newer).
Genuine Weber part 66754 Set of 2 "lighted" main burner control knobs for Weber Genesis II "LX" (model years 2017 and newer)..
The 2-7/8" diameter knobs feature a gray plastic body with chrome trim, translucent skirt for emitting light, a red position indicator and a rain boot on the valve stem shaft. The valve stem shaft extends 3/8" beyond the bottom edge of the knob..
