Eastman 04353LF Multi-Turn Dual-Outlet Compression Inlet 3-Way Stop Valve with Removable Metal Handle, 5/8-Inch OD Compression Inlet (1/2-Inch Nom.) x 3/8-OD Compression Outlet x 3/8-Inch OD Compression Outlet, Chrome Plated
✅QUALITY- Made of a brass body, plastic stem, brass nuts, and a chrome-plated finish. The Eastman Speed-flex 3-way shut-off valve is a multi-turn valve that resists corrosion and provides a water-tight seal. The working temperature is 40° F to 140° F and the working pressure is 125 PSI..
✅EASY TO USE- Removable handle with an oval design for easy grip..
✅FUNCTIONALITY- This multi-turn stop valve controls water flow at the plumbing fixture, eliminating the need to turn off the water supply to the entire home for maintenance..
✅MEASUREMENT- This stop valve has a 5/8-inch outer diameter compression inlet x dual-outlet connection: 3/8-inch outer diameter compression outlet x 3/8 outer diameter compression outlet..
✅SAFETY- UPC and NSF approved, complies with Lead Free law..
Lisle 36050 Valve Keeper Remover and Installer Kit
Quickly Removes and Installs Valve Keepers On Most Overhead Valve Engines With Valve Stems From 4.5 to 7.5mm and 5/16" to 3/8"..
Makes valve component disassembly and reassembly fast and easy. Push or tap tool with a hammer to remove valve keepers. Magnet in tool body captures keepers for quick removal and valve disassembly..
To install keepers, load in retainer on valve stem, then push or tap handle to install. Can be used on the car or bench..
New smaller size works on Toyota four cylinder and Chrysler New World Engine applications..
Bullet Piercing Valve Kits BPV-31 Refrigerator Tap Valve Compatible with 1/4 Inch 5/16 Inch 3/8 Inch Outside Diameter Pipes Replace for AP4502525 BPV31D GPV14 GPV31 GPV38 GPV56 MPV31 6 Sets
You will receive: 6 packs BPV-31 bullet piercing tap valve kits.
Each kit including 3 piercing valve, 3 hex key, 6 adapters.
Model No.: BPV-31 bullet piercing tap valve.
Replace part No.: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.
Sturdy material: made of corrosion-resistant metal that won' t wear out or rust over time, a convenient replacement part for you to use.
Easy to install: you only need a hex key wrench (included) to install this part.
Its compact design only requires a 2 inch clearance area for....
Compatible with: compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
Onwon 12 Pieces Snap-in Rubber Tire Valve Stems TR412 11.5mm 0.453 Inch with High Temperature Brass Valve Cores Tyre Valve Stems for Tubeless Rim Holes on Standard Vehicle Tires
[Keep Tires Inflated] - Use the Snap-In Short Black Rubber Valve Stem 12-Pack for Tubeless 0.453” Inch 11.5mm Rim Holes on Standard Vehicle Tires to keep your tires inflated at a steady air pressure level and easily check PSI quickly..
[Good Quality Tire Valve Stem] - Ozone tested and leak tested, these tire valve stems are manufactured from EPDM rubber and equipped with high temperature brass valve cores..
[Abundant Tyre Valve Stems] - 12 pack black tyre valve stems are enough for your spare or replacement.
A good accessories for car owners or professional mechanic..
[Rubber Valve Stem with a Cap] - The cap of this rubber valve stem can give your wheel a stylish new look and help in keeping the tyre inflated..
[Bolt-in Design] - These rubber tire valve stem with bolt-in design, easy and convenient to install and hold the pressure good.
TOAUTO Heavy Duty Cutting Torch, Oxygen Propane Acetylene Welding Torch Flame Torch Handle & Cutting Attachment with Propane Tip
【HIGH PERFORMANCE】This cutting torch is mainly used to finish heavy duty work. With this kit to cut metal with thickness 1/8-inch to 5-inch and weld up to 3/8 inch, can easily finish the work ..
【MULTIPLE GAS OPTIONS】 Cutting torch and handle are ready for multiple gas options.
Oxy-Acetylene, propane or other fuel. 2 fittings on the handle mix up oxygen and combustible gas through standard hose (inner Dia.6mm) to get cutting flame . The cutting nozzles may be different depends on the gas you are using.
【HIGH QUALITY AND STABILITY】Adopts pure brass valve, stainless steel pressure handle, integrated adjustment handwheel and stainless steel stem to offer longer lifespan and higher precision . Built in non-return valve , more safety to use it ..
【FULL SET】Full kit include torch handle, cutting torch, 1pc propane tip and 1pc acetylene tip （To meet different requirements) . Total assembled length 16inch (40mm), handle length 4.2 inch, which is very convenient to finish welding and cutting work..
【WIDELY APPLICATION】Widely used in workshops, mechanical maintenance, cutting metal and welding ..
Mudder 5 Pieces 1/4 Inch Air Chuck Set Including S690 Dual Head Air Chuck, Open Flow Chuck and Closed Flow Straight Tire Chuck with Clip for Tire Inflator Pressure Gauge Supplies
... with tires on trucks, buses, and other 2-in-1 multi-functional air chucks, functional in checking inflation and pressure, the maximum air pressure is 150 pounds per square inch.
Closed flow air chuck: 1/ 4 inch female national thread and rated pressure can be up to 250 pounds per square inch, it enables the shutoff valve to shut down the air flow when the stem is not opened, air only flowed when the chuck is engaged, the straight tire chuck can compatible with valves for most vehicles.
Note: when you take the air chuck to measure pressure or inflate a tire, please use the clip to make sure the chuck to the valve stem for sealing.
Open flow air chuck: designed to compatible with tire inflator gauges, suitable for most, there is a locking clip which can secure to seal the air chuck into place to a valve stem, so you don't need to make the chuck to valve stems, suitable for trucks, buses, cars, bicycles and motorcycles.
Material: our air chuck set is mainly made of brass which is durable and sturdy, designed with good corrosion resistance and you can use them for a long time.
Patioer R134A Refrigerant Charging Hose Gauge, Refrigerant Recharge Hose Kit with 3 Pack BPV-31 Bullet Piercing Tap Valve Kit for Car AC Air Conditioning Refrigerant Charging Can to R-12/R-22 Port
PACKAGE INCLUDES 5 PACKS: 3 x BPV-31 bullet piercing tap valve kits, each one contains 1 piercing valve, 1 hex key and 2 adapters.
1x R134A U-charge hose with gauge and can tap.
PREMIUM MATERIAL: Made of high quality metal with great rust-resistant and anti-leaking performance. The hose is made of rubber,good pressure resistance, safe to use..
R134A CHARGING HOSE: 15.3inch/39cm long, with R-134a can connect R-12 / R-22 service port, 1/2" end port fits for R12, R22, R502 fittings. And the gauge has scale readings for R134, R12, and R22. 90-degree push and lock coupler can auto shut off..
EASY TO INSTALL: BPV-31 bullet piercing tap valve kits are equipped with hexagonal wrench of suitable size, which is more convenient to install. Use the retrofit valve to attach the gauge with bullet piercing tap valve..
UNIVERSAL RETROFIT VALVE: Retrofit valve converts from R-12 to R-134a. Fit for 7/16 inch low side port.
Suit for vehicles pre-1994, comes with R-134a refill fittings. Replace AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.Compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes..
PRO BIKE TOOL 20 in 1 Bike Multitool & Adjustable Torque Wrench Set - 4, 5, 6 NM
A Pocket Workshop - includes tools: Allen / Hex key (mm): 2 | 2.5 | 3 | 4 | 5 | 6 | 8, Torx T25 and T30, Phillips Head 2 (PH2), Flat Head 5, Spoke Wrench: 3.2mm | 3.5mm | Mavic M7 and M9, Wrench (mm): 8 | 9 | 10, Chain Tool 8 to 12 Speed (Splitter) and Valve Core Tool! 360 degree tool bit movement. Also includes slim, stylish and discreet bag to safely protect the bike tool..
Peace Of Mind - Have you ever worried about over-tightening a bolt and damaging your bike? Remove guesswork and risk with our torque wrench, which prevents over-tightening bolts and damaging your carbon fiber or lightweight components. Includes ‘cam-over’ feature, ensuring the torque wrench will continue to ‘click-out’ once torque is reached. It ensures a bolt cannot accidently be over torqued. Each tool is fully tested..
Pro Quality - We’re so confident about the quality of our products that if you have any product issues, we’re very happy to either provide a Refund or a Replacement!.
2 Pack BPV31 Bullet Piercing Tap Valve Kits Compatible with 1/4, 5/16, 3/8 Inch Outer Diameter Pipes and R134A Air Conditioning Refrigerant Charging Hose with Gauge, Connect to R12/ R22 Port Only
Sturdy material: made of corrosion-resistant metal, won’t wear out or rust over time, a convenient replacement part for you to use.
The hose adopts quality rubber material, good pressure resistance and reliable.
R22 R12 charging hose: 19 inch in length, only can be applied with home refrigerator adding refrigerant, come with gauge for easily viewing during use, connect to the R-12/ R-22 service port for easy conversion.
It fits only those cans with the thread of 1/2 inch.
BPV-31 bullet piercing tap valve: replace part No.: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31, also compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
Package includes: 2 packs BPV-31 bullet piercing tap valve kits (each kit including 1 x piercing valve, 1 x hex key and 2 x adapters) and 1 piece R22 R12 charging hose with gauge, 3 pieces in total.
Easy to use: you only need a hex key wrench (included) to install this part.
Its compact design only requires 2 inch clearance area for installation and use.This system refrigerant charging pipe with built-in safety valve to prevent accidental venting of refrigerant.
