Best Variable Diameter Stabilizer

Flags Importer 6ft Spinning Stabilizer Pole (Silver)

  • 2 Section Aluminum Spinning Stabilizer Pole is 6 feet long with a 1-inch diameter and gold ball top and silver finish..
  • Includes a mid-section ball joint so that the pole spins freely, and the flag never tangles..
  • These Poles are for Wall mounting Only. Flag and mounting bracket sold separately..
Check Stock

Sulythw RV Slide Out Supports Stabilizer Jacks Heavy Duty Rust Resistant Steel Adjustable from 19'' to 47'' for 5th Wheel 5000 lbs Capacity, 4 Pack

  • 【FITS YOUR TRAVEL TRAILER STABILIZER BARS】: Universal RV stabilizer jacks for travel trailer slide out stabilizer features 5-inch (12.7 cm) circular base and a 5.1 by 3-inch (13 by 7.6 cm) u-channel bracket faceplate for secure positioning of your RV stabilizer bars.
  • The stabilizer jacks fits 19" ~47" Inch RV Slide Out Supports. Package includes (2) camper slide out stabilizers travel trailer leveling jacks to add to your camper accessories..
  • 【DIFFERENT DESIGN】This stabilizer jack utilizes a different design which is equipped with a spring inside . When you need to adjust the height of use, pull out the handle on the side combine with the spring to adjust the height of the stabilizer easily and effectively. If you need product instruction manual, please feel free to contact us..
  • 【CREATE GREATER STABILITY】: Use the Dumble RV Slide Out Stabilizers for RV Pop Out Supports, 4 Pieces Set to help alleviate tension and to increase stability in your travel trailer, RV, and camper slide out rooms.
  • These RV support jacks also help to reduce rocking motions giving you peace of mind when walking back and forth inside your motor home..
  • 【EASY TO INSTALL】: From the lowest setting, slide your RV slide out stabilizers travel trailer jacks under your slid....
Check Stock

CBE Torx Hunting Stabilizer Kit, Black

  • Includes (1) 7. 5” and (1) 11” stabilizer.
  • TORX Stealth Dampener included on each stabilizer.
  • 2 oz of Black Nitride stainless steel weights included on each stabilizer.
  • Able to mount to the front or back of the riser.
  • Adapter included for use on the front of the riser.
Check Stock

Rode NT2A Anniversary Vocal Multi-Pattern Dual Condenser Microphone Package & Monoprice Microphone Isolation Shield - Black - Foldable with 3/8' Mic Threaded Mount - Stage Right

  • Product 1: Large 1 inch HF1 gold sputtered capsule.
  • Product 1: Three position variable polar pattern: Omni, Cardioid & Figure 8.
  • Product 1: Three position variable high-pass filter: Flat, 40 Hz or 80 Hz.
  • Product 1: Three position variable pad: 0dB, -5dB or -10dB.
  • Product 2: Includes all assembly and mounting hardware | Branding/Logo on Product May Differ.
  • Product 2: Dual clamp mount attaches to mic stands or booms up to 1.25" diameter..
  • Product 2: Features a standard 3/8" microphone threaded mount and includes a 3/8" to 5/8" thread adapter.
  • Product 2: Measures about 17.3" x 15.4" x 5.5" when folded for storage.
Check Stock

New brothread Black No Show Mesh Machine Embroidery Stabilizer Backing 12 x 25Yd roll - Light Weight 1.8 oz - 3 Options - Tear Away/Cut Away/No Show Mesh

  • ▶Not Only Cutaway Stabilizer: This is black no show mesh cutaway stabilizer which provides permanent support for embroidery projects. Unlike....
  • ▶Best Used on Thin and Dark Colored Fabrics: Our black no show mesh stabilizer is semitransparent, it eliminates show-through, so it's best used on....
  • ▶How to Use: It is Light Weight no show mesh stabilizer. For the embroidery designs with light stitches, just put one layer stabilizer under the....
  • ▶Tips for Denser Stitch Designs: For heavy stitches, denser designs or thicker fabrics, you can put one layer of light weight tearaway stabilizer....
  • ▶Safe Material: It is made of 100% embossed nylon which is acid free and lead-free, safe and extremely soft to use it on your skin-touch clothes....
Check Stock

Better Bilt Top Hat Plant Container Stabilizer - 20 Gallon Size

  • Top hat design nursery container stabilizer, centers and grips containers.
  • Self-adjusting wire fingers transfer weight outward to the extended base ring.
  • Provides a wide and stable platform to withstand wind and blowing rain.
  • Made in the USA with galvanized steel wire construction.
  • Can hold a 20 gallon container, and interior diameter measures 21 and 1/4 inches.
Check Stock

Gimbal Stabilizer for Smartphone, 3-Axis Phone Gimbal with Remote Control & Tripod, Foldable and Portable Phone Stabilizer for Video Recording Compatible with iPhone and Android - Hohem iSteady X2

  • 【3-Axis Stabilization & Extra Anti-shake】Compared with average gimbals, hohem 3-axis smartphone stabilizer iSteady X2 provides extraordinary balance to shoot steady & smooth videos. Though weighs only 0.57 lbs, this handheld video stabilizer can still support the phone for up to 0.62 lbs. With this 3-axis anti-shake gimbal stabilizer, you can grasp every wonderful moment without wasting any time..
  • 【Foldable Design & Fit into the Pocket】With a folded length of 7 inches and weighs only 0.57 lbs, this handheld gimbal stabilizer is even smaller than your palm which is easily taken anywhere and capture your inspiration anytime. Hohem iSteady X2 cell phone stabilizer is always ready for adventure. Perfect smartphone gimbal for travel, outdoor and holiday season recording..
  • 【Convenient Remote & Face Tracking】To meet the more diverse needs of taking pictures, hohem iSteady X2 gimbal has added the wireless remote function, which enables you to control the cell phone stabilizer from the maximum operating distance of 32.8 ft. Paired with the updated face tracking 4.0 technic, you can also use this iPhone gimbal for vlog and youtube with ease, even at long distance..
  • 【Creative & Rich App Features】Are you still worrying about making a plain....
Check Stock

New brothread Sticky Self-Adhesive Tear Away Embroidery Stabilizer Backing 12" x 10 Yd roll - Medium Weight for Napped Fabric & Hoop Less Embroidery

  • ▶ Sticky Tear Away Embroidery Stabilizer: It is a self-adhesive tear away embroidery stabilizer which is very ideal to use on fabrics that can’t be hooped or too small to fit in a hoop. Our sticky tear away embroidery stabilizer can be torn away easily yet provides adequate stability, leaving no tears and residue..
  • ▶ Tips for keeping Needles from Getting Gummed up: 1,Slow down the stitch speed to 400spm. High stitch speed will generate more heat to melt the glue, making the needle to be gummy. 2,Rub the needle with Sewer Aid - a type of lubricant to reduce friction when stitch. 3,Using the special needle . The recommended is the Organ Anti-glue needle. 4,clean the needle with alcohol usually. 5,follow the correct steps to use sticky embroidery stabilizer(Please refer to the third pic in the description)..
  • ▶ Wide Applications: Sticky tearaway embroidery stabilizer is ideal for hard to hoop items like bulky towels, cuffs, collars, socks, doll clothes, edges, cap, backpacks, napkin corners, pockets etc. without basting them. Also use for fabrics that can be damaged by the hooping process, fabrics like leather, velvet, brushed flannel, towel, fleece and satin et....
Check Stock

Machine Light,Led Work Light, 30W Folding Aluminum Alloy ong Arm Lamp for Lathe Milling Drill Press Industrial Lighting Reading,Cool and warm light available

  • Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed..
  • Spindle Travel of 3-1/8″ with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches.
  • Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III.
  • 9-1/2 x 9-1/2″ cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2″.
  • Includes drill press, mechanical variable speed, laser, table roller extension, 5/8″ keyed chuck & key, tools for assembly.Drill press Height from the Floor to the top: 37 inch.
Check Stock

Canon RF100-400mm F5.6-8 is USM

  • 100-400mm telephoto zoom lens with f/4.5 maximum aperture for Canon SLR cameras.
  • 2 Image Stabilizer modes make it easy to capture far-off action or close-in portraits.
  • Flourite and Super UD-glass elements largely eliminate secondary spectrum.
  • Compatibility with extenders 1.4x II and 2x II.
  • Measures 3.6 inches in diameter and 7.4 inches long.
Check Stock