Best Varnish Thinner

3M Scotch-Brite Flat Surface Paint and Rust Stripper Kit (9419NA)

Scotch-brite, 5-1/4″ x 7-3/4″ x 2″, flat surface paint & varnish remover, kit contains #9410NA flat surface paint & rust stripper Plus drill mounting pad.
Coarse Web Removes Old Paint From Wood Or Removal Of Rust & Paint From Metal.

Body Body shape: Other Cutaway: Non-cutaway Top: Hawaiian koa Back and sides: Layered koa Bracing pattern: Other Body finish: Varnish Orientation: Right handed Neck Shape: Other Nut width: 1.687″ (42.8mm) Fingerboard: Ebony Wood: Tropical mahogany Scale length: 23.5″ Number of frets: 20 Finish: Varnish Electronics Onboard: Yes Brand: Taylor Configuration: Undersaddle piezo Preamp EQ: 2-band.

For sanding between coats of varnish, lacquer, paint and other finishes..
Silicon carbide abrasive, a sharp synthetic mineral that cuts fast and smooth.
Ideal for obtaining a satin smooth finish on lacquer, varnish, enamel and synthetic coating.
For use on wood, metal, plastic, fiberglass, and for auto finishing.

Eliminates epoxy grout haze in 10 minutes or less.
Removes epoxy grout haze and tough coatings - varnish, lacquer, sealer, wax, paint, polyurethane and acrylic.
Safely removes epoxy grout haze and tough coatings - varnish, lacquer, sealer, wax, paint, polyurethane and acrylic.
Fast-acting, non-runny gel - great for vertical and horizontal applications.

For airbrushing use 1789, 8824 or 8825C Enamel Airbrushing Thinner Use the following ratio as a starting point Gloss: 3 parts paint to 2 parts thinner Flat: 3 parts paint to 1 part thinner Compressor regulator setting: 16-25 PSI Enamels require 48 hours to completely cure.

X designated colors have a glossy finish while XF designated colors are flat finish..
The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner..
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish..
For better paint brushing results use Tamiya Paint Retarder (87114) for a smoother brushstroke free finish..

CITRISTRIP Safer Paint & Varnish Stripping Gel is easy to use..
Stays wet and active for up to 24 hours allowing stripping of multiple layers in one step..
Removes dried latex and oil-based paint, varnish, lacquer, polyurethane and shellac..
Strips multiple layers from wood, metal and masonry surfaces..

For airbrushing use 1789, 8824 or 8825A Enamel Airbrushing Thinner Use the following ratio as a starting point Gloss: 3 parts paint to 2 parts thinner Flat: 3 parts paint to 1 part thinner Compressor regulator setting: 16-25 PSI Enamels require 48 hours to completely cure..

Safer professional paint and varnish remover.
formulated with no methylene chloride or NMP.
Capable of removing up to 15 layers of paint, varnish, stain, lacquer and urethane.
a heavier coat will remove multiple layers with a stripping tool.
Apply with a brush, medium sized nap paint roller, or putty knife. Case Height-5.38 inch. Case Depth-10.19 inch. Case Width-15.44 inch.
use on interior or exterior surfaces including wood, plaster, concrete, brick, stone, masonry, marble, metal and....

5 DIFFERENT SHADES – We have 5 different wax colors: clear natural, gray/grey, brown, black and white. All colours are mixable and can create a variety of shades..
100% NATURAL – Made by chemists. Approved by painters. It’s best to prep your surface if it’s shinny. Use a TSP or the Colorantic cleaner and varnish remover. Let it acts 30 min, then rinse with a damp cloth. You can use our small two-grains sanding blocks to remove the excess of the old-varnish. Then you are ready to apply our Colorantic’s paints. Apply two coats, then let it dry 2 to 3 hours. Then you can use our Colorantic waxes with one of our round wax paint brushes for maximum results..
EASY TO CLEAN – We have the perfect Colorantic mango wax and paint brush soap. Your furniture are bests with a wax or a varnish to increase longevity. We have different wax colors available to create the perfect ombre, Vintage or antique look..