Best Viscosity Breaking

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 205B Fast Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • BUNDLE INCLUDES: West System 105B Epoxy Resin (126.6 fl oz), 205B Fast Epoxy Hardener (27.5 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
Check Stock

Red Line MT-85 75W85 GL-4 Manual Transmission Lubricant Pack of 2

  • Less slippery low sulfur formula compatible with brass synchronizers.
  • Stable at high temperatures in performance applications.
  • Also available as lighter viscosity MTL and heavier MT-90.
  • Satisfies gear oil viscosity requirements of 75W.
Check Stock

Valvoline Daily Protection SAE 5W-30 Synthetic Blend Motor Oil 5 QT (Packaging May Vary)

  • Designed for use in four-stroke marine engines.
  • Synthetic blend formulated to provide ultimate corrosion resistance and wear protection in high-rpm four-stroke outboard motors.
  • Offers industry-leading strength and viscosity retention to maintain peak engine performance and reliability.
Check Stock

Red Line (50304) MT-90 75W-90 GL-4 Manual Transmission and Transaxle Lubricant - 1 Quart

  • Less slippery low sulfur formula compatible with brass synchronizers.
  • Stable at high temperatures in performance applications.
  • Also available as lighter viscosity like MTL and MT-85.
  • Satisfies gear oil viscosity requirements of 75W.
Check Stock

Loctite 2301375 680 High Strength Bearing Mount For Relaxed Fits, O.E.M. Specified, 36-mil Bottle

  • QUALITY. High strength, medium viscosity anaerobic adhesive for slip fit assemblies..
  • APPLICATIONS. Replaces set screws, clamp rings, snap rings, wheel bearings, idler shaft, fit bearings..
  • FORMULATED. Selection of viscosity, gap-filling ability, flexibility and strength characteristics..
  • RESULTS. Seal joints to stop leakage and prevent fretting and corrosion..
  • EASY TO USE. Adheres in 10 minutes at room temperature..
Check Stock

Idemitsu CVT Type N (NS-2) Transmission Fluid for Nissan - 5QT

  • Precisely engineered frictional characteristics outstanding anti-shudder performance in CVTs equipped with torque converter.
  • Exact frictional properties provides superior performance in demanding, high torque applications.
  • Provides superior deposit control and protects metal surfaces from rust and corrosion.
  • Advanced anti-wear technology provides maximum protection to belt and pulleys.
  • Precisely engineered formulation provides excellent viscosity control minimal viscosity loss due to shearing, outstanding low temperature fluidity, enhanced lubricant film strength at high temps.
Check Stock

Professional Grade CA Super Glue by CYAPRO, Fast Curing Adhesive 2 oz, Low Viscosity, Thin Cyanoacrylate Adhesive for Woodworking, Hobby, Plastic, Ceramic & Metal, transparent

  • Professional Grade Cyanoacrylate Super Glue: CYAPRO cyanoacrylate adhesives offer the best bonding performance, thin, low viscosity super glue will usually give you the bond you need in less than 5 seconds.
  • Instant CA Glue: Low viscosity CA glue, also known as instant CA glue, has a viscosity of 2-5 CPS and provides ultra-fast bonding and deep penetration for repairing small holes and cracks.
  • Precise Micro-Tips Fittings: CYAPRO Super Glue comes with 3 micro-tips fittings to perfectly repair tiny cracks and to assist in controlling the amount used during application. Extra applicator and anti-clogging cap with microneedle on top of the applicator to prevent clogging.
  • Suitable for Multiple Materials: Our CA glue is suitable for wood, metal, rubber, leather, ceramics, gemstones, rocks and minerals, carbon fiber, fiberglass, PVC and most plastics. It is the best choice for DIY enthusiasts, modelers, carpenters and model enthusiasts.
  • WARNING: Do not use on fabric and always wear goggles. Keep out of direct sunlight and store in a cool, dry place.
Check Stock

Saviland Poly Nails Gel - 30g Glaring Beauty Nail Extension Gel Builder Nail Gels Hard Gel Enhancement Nail Thickening for Nail Art Design Salon Nail Easy DIY at Home

  • ... use nail dehydrators and nail primer, which can make nails last longer..
  • ❤ 【WARM TIPS】 The poly nails gel needs to be cured for 120s -180s by two sides to make sure it dries totally. After you finished your nails, you need to use slip solution to wipe off the oil slick. Temperature has an effect on poly gels' viscosity. When in the low temperature, the builder builder nail gels become more viscous..
  • ❤【HAPPY SHOPPING】 Saviland poly extension gel is designed for salon-level quality, but it is also suitable for beginners and professional manicurist. All products are subject to quality control. Therefore, for product pre-sales and after-sales questions, please feel free to contact us~.
Check Stock

Nickel Adhesive Electrically Conductive Epoxy 1 Part Heat Cure AA-Bond N02 2.5gm Syringe

  • Viscosity at 25 °C cps Soft Paste, Specific Gravity, mixed 3.2.
  • Mechanical Properties Hardness, Shore D 88, Reactive solids contents, % 100 Pot Life 30 minutes.
  • Volume Resistivity ohm-cm less than 0.038.
  • Mixed Viscosity at 25°C, cps Soft Paste.
  • Operating Temperature -55 to 175 °C, Cure time 2 hours @ 125°C 1 hour @ 150°C 30 minutes @ 175°C.
Check Stock

Siraya Tech Blu Nylon 3D Printer Resin Nylon-Like Strong and Precise High-Resolution 3D Printing Resin 405nm UV-Curing Rapid Resin for LCD DLP 3D Printer(1kg, Nylon Black)

  • ...ing the load without changing the shape. Siraya Tech Blu Nylon resin is compatible with most LCP and DLP 3D printers..
  • Precise Prints - Blu Nylon black 3D printing resin can be printed accurately, allowing you to print the finest details, and has good fluidity, allowing the model to be printed and cured quickly. The viscosity of this rapid resin is very high, it is recommended to print at 25°C..
  • Precise High Resolution and Surface Finish - Siraya Tech Blu Nylon 3D printer resin has excellent colors, a very smooth surface, and strong and precise high resolution, making your model look great, with precise details..
  • Works Great As Additive - Siraya Tech Blu Nylon Black 3D printer resin can be used as an additive to be mixed with other resins, which can improve the toughness of printed matter and increase the resolution of other resins..
Check Stock