Best Viscosity In Cosmetics

Hook and Loop Tape-Roll Self Adhesive Tape Strips Sticky Back Fastener, 1In x 41Feet

  • WIDE APPLICATION : The fastener magic tape is good for home, office, tents, school and other crafting applications. Should be applied on smooth surfaces, such as walls, plastics, glasses, etc..
  • POWERFUL TAPE : The Hook and Loop Tape can hold up to 2.7 kilograms without bolts, screws, sewing or glue, reusable and abrasion resistant, performed well both indoor and outdoor..
  • CUT INTO THE LENGTH YOU WANT :The hook and loop strips can be cut into the length you want and need, good for your crafting, sewing and so on.
  • TAPE ROLL SIZE: The hook and loop tape roll package includes 1 roll of self-adhesive hook tape and 1 roll of self adhesive loop tape. Each roll is 41 feet/12.3m in length and 1 inch/3cm in width..
  • NOTE : Recommended to use on a smooth surface to guarantee its viscosity , such as walls, plastic, glass, metal, etc.Excessive dust and impurities or uneven surface will reduce its viscosity. Besides, the viscosity will be greatly reduced when it is torn off and used again..
Check Stock

Red Line MT-85 75W85 GL-4 Manual Transmission Lubricant Pack of 2

  • Less slippery low sulfur formula compatible with brass synchronizers.
  • Stable at high temperatures in performance applications.
  • Also available as lighter viscosity MTL and heavier MT-90.
  • Satisfies gear oil viscosity requirements of 75W.
Check Stock

Valvoline Daily Protection SAE 5W-30 Synthetic Blend Motor Oil 5 QT (Packaging May Vary)

  • Designed for use in four-stroke marine engines.
  • Synthetic blend formulated to provide ultimate corrosion resistance and wear protection in high-rpm four-stroke outboard motors.
  • Offers industry-leading strength and viscosity retention to maintain peak engine performance and reliability.
Check Stock

Red Line (50304) MT-90 75W-90 GL-4 Manual Transmission and Transaxle Lubricant - 1 Quart

  • Less slippery low sulfur formula compatible with brass synchronizers.
  • Stable at high temperatures in performance applications.
  • Also available as lighter viscosity like MTL and MT-85.
  • Satisfies gear oil viscosity requirements of 75W.
Check Stock

Creative Poly Mailers 10x13 inch 100 pcs, Shipping Bags, Thank You Floral Fur Packaging Bags with Self Adhesive Strip, 2.35 Mil Durable Mailing Envelopes for Shipping Multipurpose

  • ...through, equipped with a powerful adhesive to protect your privacy perfectly and prevent theft. Creative Mailers shipping envelopes are made to be incredibly durable to resist punctures, tears, and moisture..
  • DURABLE PROTECTION: Made with premium-grade Polyethylene plastic, strong tear resistance, waterproof, strong viscosity, a best choice for their high-strength design that keeps contents secure against moisture, tampering, puncturing and tearing..
  • WIDELY USE: Our shipping poly bags are perfect for shipping a variety of items such as apparel and accessories, shirts, blankets, scarves shoes, jeans, books, cosmetics, jewelry, vitamins, supplements, nutrition products, and much more..
  • Creative Mailer is an online seller inspired, creative, a small family business, is committed to make our customer's customers happy by redesigning the poly mailers. Our special edition 'Thank You' appreciation line will stand out with your retail, shipping, and packaging supplies..
Check Stock

West System 105A Epoxy Resin (32 fl oz) Bundle with 205A Fast Epoxy Hardener (7 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • BUNDLE INCLUDES: West System 105A Epoxy Resin (32 fl oz), 205A Fast Epoxy Hardener (7 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
Check Stock

Idemitsu CVT Type N (NS-2) Transmission Fluid for Nissan - 5QT

  • Precisely engineered frictional characteristics outstanding anti-shudder performance in CVTs equipped with torque converter.
  • Exact frictional properties provides superior performance in demanding, high torque applications.
  • Provides superior deposit control and protects metal surfaces from rust and corrosion.
  • Advanced anti-wear technology provides maximum protection to belt and pulleys.
  • Precisely engineered formulation provides excellent viscosity control minimal viscosity loss due to shearing, outstanding low temperature fluidity, enhanced lubricant film strength at high temps.
Check Stock

Professional Grade CA Super Glue by CYAPRO, Fast Curing Adhesive 2 oz, Low Viscosity, Thin Cyanoacrylate Adhesive for Woodworking, Hobby, Plastic, Ceramic & Metal, transparent

  • Professional Grade Cyanoacrylate Super Glue: CYAPRO cyanoacrylate adhesives offer the best bonding performance, thin, low viscosity super glue will usually give you the bond you need in less than 5 seconds.
  • Instant CA Glue: Low viscosity CA glue, also known as instant CA glue, has a viscosity of 2-5 CPS and provides ultra-fast bonding and deep penetration for repairing small holes and cracks.
  • Precise Micro-Tips Fittings: CYAPRO Super Glue comes with 3 micro-tips fittings to perfectly repair tiny cracks and to assist in controlling the amount used during application. Extra applicator and anti-clogging cap with microneedle on top of the applicator to prevent clogging.
  • Suitable for Multiple Materials: Our CA glue is suitable for wood, metal, rubber, leather, ceramics, gemstones, rocks and minerals, carbon fiber, fiberglass, PVC and most plastics. It is the best choice for DIY enthusiasts, modelers, carpenters and model enthusiasts.
  • WARNING: Do not use on fabric and always wear goggles. Keep out of direct sunlight and store in a cool, dry place.
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 205B Fast Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • BUNDLE INCLUDES: West System 105B Epoxy Resin (126.6 fl oz), 205B Fast Epoxy Hardener (27.5 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
Check Stock

Hot Stuff Instant Glue Pro Kit Includes CA Glues Accelerator Debonder Extra Spouts HK-1

  • [Hot Stuff Original] Thin CA Glue with a viscosity (3cps) similar to water and no surface tension. Have the parts that fit exactly together, get them....
  • [Super T MEDIUM] Gap-Filling CA Glue has a viscosity (200-300 cps) similar to syrup. This super glue is perfect for gluing somewhat porous materials....
  • [Special T THICK] Ultra Gap-Filling CA Glue has a viscosity (1150-1500) similar to honey. Works great when you use it to bond both porous and....
  • [NCF Quick Accelerator] is the best accelerator you will find anywhere. All of our accelerators dramatically decrease the curing time of the glue and....
  • [US-1 Super Solvent] is the very best product to debond and dissolve CA Glues from our kit, and it will also remove super glue made by other....
Check Stock