Yost Vises 34C Combination Vise | 6 Inch Jaw Width Heavy-Duty Utility Pipe and Bench Vise |Secure Grip with Swivel Base and Large Pipe Jaw Capacity | Made with Ductile Iron | Blue
COMBINATION VISE: The Yost Vises 34C 6-inch utility combination pipe and bench vise are made from 65,000 PSI Tensile Ductile Iron body parts. It has hardened, replaceable steel pipe jaws as well as hardened steel flat serrated jaws and continuous rolled thread on the main screw. The pipe jaws are set back to allow for the machinist's vise use..
SWIVEL BASE: Interlocking swivel base with 360-degree motion and 2 lockdowns..
HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that ....
HOME VISE: Net weight 3.31 lbs, Maximum width of jaw opening 2.5 inch, Jaw width 2.0 inch.
EASY TO INSTALL: This bench vise can be installed on the edge of all kinds of desktops. The table board up to 2.4 inches thick can be clamped. Convenient and quick to install and remove.
PROTECT TABLE TOP: During installation, there is no need for punching on the table, with 2 rubber washers to prevent table scratch and 2 jaw washers for protection of the parts (To ensure good use of rubber gaskets, please refer to the product picture before use. Adjust the fixing chin to a larger opening first, then install the rubber washer in the planned corresponding position, secure it in the end).
WIDE RANGE OF USES: This vise can hold a variety of parts，O-shape Swivel base allows vise rotating up to 360-Degree, Even if you are left-handed, you can rotate the vise to the position that suits your work.
TIPS: Please carefully browse our product photos to understand the size of each part of the vise before place an order. We promise you that if you have any dissatisfaction with this product, you can enjoy the refund or exchange service at any time without any reason.We welcome you to contact us at any time, we will provide you with a satisfactory solution..
Angle Grinder Fixed Holder,Multifunctional Universal Desktop Angle Grinder Stand,Cutting Machine Table Saw Pull Rod Angle Grinding Machine Bracket for 100/115/125mm
...less steel ceiling with a 45-degree angle, which is light and convenient. Shelf, multi-purpose machine!.
【Outstanding Performance】-- Upgrade and widen the clamping distance, the maximum clamping distance is 150mm. The maximum clamping angle of the clamp can reach 45 degrees, the maximum clamping is 80mm. Maximum cutting depth is 30mm..
【Smooth Operation】--Angle Grinder Holder sliding cutting, stable operation, large cutting range, the maximum clamping angle of the clamp can reach 45°, and the maximum clamping length is 8cm. Compared with vise and freehand cutting, our bracket is much better.
【Lightweight Workbench】--This is a lightweight workbench, very suitable for the lightest grinder on the market. You want to reduce the damage of the bracket and/or the grinding wheel by not pressing hard when cutting..
【Thickened Steel Base】--Compared with other steel bases of angle grinder brackets, our base is thicker and more stable. For the cutting of general objects, there will be basically no big shaking, but if you cut super long Objects, please fix them with clamps or heavy..
HOME VISE: Net weight 3.62 lbs, Maximum width of jaw opening 3.0 inch, Jaw width 2.75 inch.
EASY TO INSTALL: This bench vise can be installed on the edge of all kinds of desktops. The table board up to 2.4 inches thick can be clamped. Convenient and quick to install and remove.
PROTECT TABLE TOP: During installation, there is no need for punching on the table, with 2 rubber washers to prevent table scratch and 2 jaw washers for protection of the parts (To ensure good use of rubber gaskets, please refer to the product picture before use. Adjust the fixing chin to a larger opening first, then install the rubber washer in the planned corresponding position, secure it in the end).
WIDE RANGE OF USES: This vise can hold a variety of parts，O-shape Swivel base allows vise rotating up to 360-Degree, Even if you are left-handed, you can rotate the vise to the position that suits your work.
TIPS: Please carefully browse our product photos to understand the size of each part of the vise before place an order. We promise you that if you have any dissatisfaction with this product, you can enjoy the refund or exchange service at any time without any reason.We welcome you to contact us at any time, we will provide you with a satisfactory solution..
WEN CM1452 15-Amp 14-Inch Premium Multi-Material Cut-Off Chop Saw with Carbide-Tipped Metal-Cutting Saw Blade
Easily take on ferrous metals, non-ferrous metals, plastics, woods, and more.
Features a rectangular cutting capacity of 3.75 by 7.25 inches, a round tube cutting capacity of 5.125 inches, and a steel plate cutting capacity up to 0.5 inches thick.
Powerful 15-amp motor rotates the 66-tooth carbide-tipped professional mild steel blade (model BL1466) up to 1450 times per minute.
Quick release vise clamp allows for maximum efficiency and productivity.
Top-of-the-line chop saw includes a low-vibration precision-machined cast aluminum base, a 45-degree adjustable fence, a round work piece holder, a 1.5-inch dust port, a removable dust bin, a plunge lock, and a two-year warranty.
Riverruns II Generation Rotary Fly Tying Vise Jaw Balanced Truly Extendable Right&Left Hand Fitting
Riverruns II Generation fly tying vise is a true extendable rotary action fly tying vise on the market! Any hook hold by the jaws is able to stay at....
Jaws set is truly extendable in both horizontal and vertical dimension to accommodating any large flies needed to work on. All vise are equipped both....
The jaws clamming system exerts a force of 10:1 ratio on the hook, a rock solid holding. The Jaws of the vise are easy to open and close. They are....
The bobbin cradle is very handy and versatile. It can be used as a parachute tool. Simply turn over the unit on the vise stem and then tighten the....
Dicrey Mini Table Vise Clamp Small Bench Vice New Upgraded 3.5 Miniature Jewelers Hobby Clamp On Table Bench Vise Tool for Arts,Crafts,Woodworking,Modeling
Full Usage:The mini table vise can work for small....
Material:Mini vise body is made of cast Aluminum,handy miniature vise,ideal for holding small parts.Durable and lightweight vise,protable tool.Screws....
Great for Hobby:Suitable for jewelry,hobbyist, model making, electronics, home and work-bench many more applications.Hold small parts for soldering as....
Easy to Use:The mini vise is incredibly and easy for everyone.Simply turn the bar on top to open/close the clamp onto a table surface and then tuen....
Protable and Lightweight:Clamps onto a Surface up to: 35mm Thick.Jaws: Smooth.Vise Body: Aluminum.Jaw Width: 36mm.Maximum Jaw Opening:....
