LRONG 1PC PC Chassis Fan Hub CPU Cooling HUB Fan PWM Hub SATA Controller Speed Controller
12V 10-way 4pin SATA fan hub, to solve the problem of insufficient motherboard fan ports. The hub has 10 fan ports, can support 10 fans, can meet various host requirements, and supports 3pin/4pin fans..
Installation steps: The PWM port is connected to the CPU fan port on the motherboard. The red port is dedicated to the CPU fan. Connect 1 fan to the red portand then connect the rest of the fans. Then you need to connect the fan hub’s PWM cable to the motherboard. Connect the SATA cable to the fan hub..
Equipped with PWM cable: The hub is equipped with a PWM cable with a length of 40CM, which can support the back line. After the PWM cable is connected to the main board, the temperature control and speed can be controlled by the main board..
Convenient installation: the hub is fixed with 3M glue, and the back of each hub is equipped with an American 3M glue, which can make the hub work well.
Package content: 1 X 12V 10-channel 4pin fan hub, 1X PWM connection cable..
PORT CONFIGURATION - Fast networking performance with 24 Gigabit Ethernet ports.
SMART POWER - "Consumption Mode" allocates power efficiently, allowing the PoE budget to power more devices. Smart PoE+ 802.3af/802.3at support with a max of 30W per port (130W total budget).
SMART MANAGED - Get up and running in minutes: Web-based setup wizard enables simple and fast configuration and management.
LAYER 2 FEATURES - VLAN, QoS, IGMP Snooping, Link Aggregation (LAG), IPv6 and DoS prevention enable better security and management.
Fast networking performance with 24 Gigabit Ethernet ports and non-blocking full bandwidth of 2,000 Mbps per port.
Get up and running in minutes: The intuitive web-based set-up wizard enables simple and fast configuration and management, even for non-technical staff.
Standard 19" rackmount and fanless design ensures quiet operation and higher reliability over time.
Advanced features like VLAN, QoS, IGMP Snooping, Link Aggregation (LAG), IPv6 and DoS prevention enable better security and management.
Lifetime hardware warranty, free firmware upgrade support and free technical support for long-term assurance.
Airgoo PWM ARGB Fan Hub, 8 Fan Ports with pwm Temperature Control sync with Motherboard, 8 Addressable RGB LED Ports for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, Sata Powered
【8 Channels Fan Hub】Powering up to 8 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Fan Header, sync with Motherboard Fan Header, 8 channels support(F-1~F-8) and only 1 channel RPM detect support(F-1). Sata Powered, support connect more high performance fans, extended your motherboard fan headers. And Airgoo ARGB Fan Hub built-in fuses, keep your system safe..
【PWM Temperature Control】Fan speed can be automatically adjusted by motherboard BIOS pwm temperature function. If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1(F-1) can be identified by the system..
【8 Channels ARGB Hub】8 channels argb hub, connect any 5V 3-pin (+5V, DATA, N/A, GND) addressable rgb fans or addressable rgb led strips you wish to control, just plug this ARGB Fan Hub into motherboard argb header via included extension cable, sync with motherboard 5V 3-pin ARGB headers. Sata Powered, support connect more argb lightings, extended your motherboard argb headers. And Airgoo ARGB Fan Hub b....
Airgoo PWM ARGB Fan Hub, 2022 New Upgrade 8 Fan Ports with pwm control sync with motherboard, 8 Addressable RGB LED Ports for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, Sata Power
【8 Channels Fan Hub】Powering up to 8 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Fan Header, sync with Motherboard Fan Header, 8 channels support(F-1~F-8) and only 1 channel RPM detect support(F-1). Sata Powered, support connect more high performance fans, extended your motherboard fan headers. And Airgoo ARGB Fan Hub built-in fuses, keep your system safe..
【PWM Temperature Control】Fan speed can be automatically adjusted by motherboard BIOS pwm temperature function. If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1(F-1) can be identified by the system..
【8 Channels ARGB Hub】8 channels argb hub, connect any 5V 3-pin (+5V, DATA, N/A, GND) addressable rgb fans or addressable rgb led strips you wish to control, just plug this ARGB Fan Hub into motherboard argb header via included extension cable, sync with motherboard 5V 3-pin ARGB headers. Sata Powered, support connect more argb lightings, extended your motherboard argb headers. And Airgoo ARGB Fan Hub b....
ZyXEL VMG4825 B10A - WIRELESS AC/N VDSL2 COMBO WAN (VDSL+GBE WAN) MODEM GBE GATEWAY AC
PORT CONFIGURATION - Fast networking performance with 24 Gigabit Ethernet ports.
SMART POWER - "Consumption Mode" allocates power efficiently, allowing the PoE budget to power more devices. Smart PoE+ 802.3af/802.3at support with a max of 30W per port (130W total budget).
SMART MANAGED - Get up and running in minutes: Web-based setup wizard enables simple and fast configuration and management.
LAYER 2 FEATURES - VLAN, QoS, IGMP Snooping, Link Aggregation (LAG), IPv6 and DoS prevention enable better security and management.
ECCPP New Front Wheel Hub Bearing Assembly 515003 fit for Ford Explorer (Sport Trac) Ranger, Mercury Mountaineer, Mazda B3000 B4000 4WD w/ABS 5 Lug 3 Flange Bolt 2pcs
FEATURES - ECCPP'S wheel hub bearing assembly fits for the front location, 5 Lugs with ABS, 3 Flange Bolt, replace OE 515003.
MAIN FUNCTION - Hub bearings can fix the tire and support the gravity of the whole body, provides precise guidance for the rotation of the hub. wheel hub bearing enables the wheels and attached components to rotate smoothly and keeps the wheel attached to the car. High quality wheel hub assembly make you enjoy your vehicle in a safe and smooth.
PREMIUM FEATURES - ECCPP wheel bearing assemblies manufactured by high-quality materials for ensuring precisely matches, durability, reliability and premium performance. The high-quality seal design provides superior anti-pollution protection, ensuring that the hub bearings are clean, long lasting and minimizing noise and vibration. Wheel bolts with protective coating that helps prevent rust and corrosion and makes it easier to disassemble and properly twist the wheel nuts.
SERVICE WARRANTY - 1 year warranty, support replace, return and refund service.
