Best Voltage Meter Tester

DC 12V 24V 36V 48V 72V Battery Capacity Voltage Meter with Alarm, Battery Capacity Gauge Indicator, Battery Gauge Monitors, Lithium ion Battery Tester for Car Vehicle (Green Light)

  • Practical to use: the battery voltage tester is featured with switched function button, you can press to check the cattery capacity or real-time voltage and turn off, with alarm design, the battery meter display will flash when the battery capacity is lower than 20 percent.
  • Easy to read: designed with clear LCD digital display, the battery gauge indicator comes with PVC waterproof screen protector with bright back-light, which makes you can read the results from different angles, low working power consumption and the max is 5 mA.
  • For different battery: the battery capacity indicator is compatible with 12V/ 24V/ 36V/ 48V/ 60V/ 72V/ 84V acid battery, ternary lithium battery, polymer lithium-ion battery, 3 -15 series lithium ion battery, storage battery, water battery and more.
  • Working voltage input: this package comes with 1 piece of battery tester with alarm, practical for you to use and replace in daily life, the working voltage input ranges from DC 12V to 84V, which can automatically detect to the accurate voltage according to the battery voltage.
  • Widely applicable: the battery capacity voltage indicator can be placed in different places, such as garden, home, office and more, reliable and can be applied you for a long time, meeting your different ....
Check Stock

Megger MIT310-EN Insulation Tester, 1000 Megaohms Resistance, 250V, 500V, 1000V Test Voltage

  • Insulation tester for testing insulation resistance, voltage, and continuity in electrical installations.
  • Average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform.
  • Dual digital display with analog arc function to replicate response of analog meters.
  • Measures insulation resistance from 0 to 1,000 megohms, voltage from 0 to 600V, and continuity from 0.01 to 100 ohms.
  • Safety rated to European Standard EN61010-1 Category III, 600V and IP54 rated for protection against dust and splashing water.
Check Stock

East Tester Desktop LCR Meter inductance Tester 10~100KHz Continuously Adjustable; 1Hz Step; Support SCPI; (4510, Grey, 3)

  • Lcr meter benchtop Testing frequency 100khz.
  • Capacitance meter capacitor tester Basic accuracy:0.1%.
  • Capacitance clamp meter Interfaces: standard: RS232.
  • Inductance meter tester Support dc resistance (DCR).
  • Inductance meter benchelectrolytic capacitor measurement model,Adjustment of backlight brightness, Chinese and English are optional.
Check Stock

ACEIRMC 2pcs 0.28' LED Voltmeter Ammeter, Red and Blue Digital Multimeter Display Voltage Current Tester,DC 0-100V 10A Detector Voltage Current Meter Panel Amp Volt Gauge

  • 2.2pcs Accurate Voltmeter Ammeter DC0-100V Voltage 10A Current Meter 2-in-1 Digital Multimeter 10A Volt Amp Tester Meter with 5 Wires 0.28" Red and Blue Dual LED Display.
  • 4.Operating Humidity: 10 to 80% (non-condensing).
Check Stock

New Upgraded Network Cable Tester with Optical Power Meter VFL, RJ45 Wire Cable Tracer for Telephone, Ethernet, Video, Tone Generator,CAT5 CAT6 Cable Toner Ethernet Cable Tester PoE

  • ... Cable Tester: There are nine features to meet your needs. Continuity testing, cable scan, port flash, length measurement, POE Power Supply Test, QC testing, optical power meter, VFL function, and NVC function..
  • PoE Testing: PoE testing can check cable mapping polarity and voltage of PoE network switches, withstand 60VDC. Automatically detects and switches between 10M/100M/1000M modes. Includes cable tracking, short circuit test, interruption of circuit test and etc.
  • Cable Length Test: The RJ45 cable tester can quickly measure the length of the cable with a range of 200m. Not only network cables, but also phone lines and BNC cables..
Check Stock

Digital pH/TDS Meter with ATC pH Tester, 0.01 Resolution High Accuracy 3 in 1 Pen Type Tester, Water Tester for Water, Wine, Spas and Aquariums

  • 【3-in-1 pH Meter】pH meter has a three-in-one function, which can measure PH, TDS and temperature with high precision at the same time. All-round measurement of water quality to ensure healthy water quality..
  • 【Automatic Calibration pH Tester】With high sensitive glass probe, you can get a full measurement range of 0-14pH, 0.01 pH resolution. And pH meter uses a 3-point calibration method to calibrate the electrode to solutions of pH 4.00, pH 6.86, and pH 9.18. You can calibrate effortlessly to ensure the accuracy of your measurements..
  • 【High Accuracy Water Tester】High-accuracy algorithm chip and electrode of our digital water ph tester ensure accurate and fast response. Green Backlit LCD Design guarantees that you can read the measuring results in any condition. One-button lock reading function helps lock reading even if the tds Meter is taken out of the sample!.
  • 【Pocket Size Water pH Tester】 You can use this small Pocket Size but powerful pH meter device to measure your aquarium, pool, pond in a garden, bath tub to test the levels of pH value. The digital ph meter can also be used to measure drinking water, R....
Check Stock

Wiha Non-Contact Voltage Tester Category IV 12-1000V AC with Flash Light - 25506

  • LED In plastic tip illuminates red and emits audible warning for safe voltage detection.
  • Non-contact detection on any terminal for safety and efficiency.
  • Detects AC Voltages between 12 and 1000 volts with the precise proximity sensor.
  • LED light electrical field meter determines voltage reading for accurate voltage detection.
  • Universal measurement tip for compatible international usage.
  • Automatic switch-off after 4 minutes (voltage tester), or 15 minutes (torch) for battery conservation.
  • Lightweight design with clip for easy portability and storage.
  • Complies with the EN 61010-1 & IEC 61326 standard and compatible with CAT IV 1,000 AC.
Check Stock

Digital pH Meter with ATC pH Tester, 3 in 1 pH TDS Temp 0.01 Resolution High Accuracy Pen Type Tester, Water Tester for Water, Wine, Spas and Aquariums

  • 【3-in-1 pH Meter】pH meter has a three-in-one function, which can measure PH, TDS and temperature with high precision at the same time. All-round measurement of water quality to ensure healthy water quality..
  • 【Automatic Calibration pH Tester】With high sensitive glass probe, you can get a full measurement range of 0-14pH, 0.01 pH resolution. And pH meter uses a 3-point calibration method to calibrate the electrode to solutions of pH 4.00, pH 6.86, and pH 9.18. You can calibrate effortlessly to ensure the accuracy of your measurements..
  • 【High Accuracy Water Tester】High-accuracy algorithm chip and electrode of our digital water ph tester ensure accurate and fast response. Green Backlit LCD Design guarantees that you can read the measuring results in any condition. One-button lock reading function helps lock reading even if the pH Meter is taken out of the sample!.
  • 【Automatic Temperature Compensation Digital pH Meter】No longer need to pay attention to the temperature of testing liquid, pH meter can accurately determine the pH value of the sample in the temperature range of 32°F-140°F(0°C-60°C), so as to solve the inaccurate problem caused by changing the liquid temperature..
  • 【Pocket Size Water pH Tester】 You can use this small Pocket S....
Check Stock

Klein Tools CL320 Digital Clamp Meter, HVAC AC Auto-ranging 400A, AC/DC Voltage, TRMS, DC Microamps, Resistance, Frequency, NCVT, Temp, More

  • Clamp Meter measures AC current and NCVT via clamp and AC/DC voltage, resistance, frequency, DC microamps, capacitance, duty cycle, diode test, and continuity via test-leads, and temperature with thermocouple.
  • Non-contact voltage tester integrated into the clamp jaw.
  • Backlit LCD for ease of viewing in low light.
  • Automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy.
  • Test lead holder on side of clamp and optional magnetic hanger for meter (Cat. Nos. 69445 or 69417) for hands free operation.
  • Measures temperature with a K-Type thermocouple probe.
  • Auto-Range, Data Hold, and Max/Min value.
Check Stock

IDEAL INDUSTRIES INC. 61-025 Volt Aware Non-Contact Voltage Tester, Clear and Compact Voltage Testing, CATIV for 1000v

  • ACCURATE VOLTAGE TESTER: Green LED shows unit is active, flashing red indicates live voltage. The VoltAware NCVtester is useful for identifying hot conductors, finding breaks in wires and detecting the presence of AC voltage at outlets, switches, electrical panels, wires and cables..
  • ULTRA EASY TO USE: Twist the tester body to the On position and verify the green light is on. Verify tester operation on a known voltage source. Next, place the tip of the tester near an AC voltage source to obtain a voltage indication. Voltage presence is indicated by a red, flashing light. If no voltage is detected for a period of 15 minutes, the tester will flash green three times then shut off automatically.* Twist the tester body to the Off position, then back to On to reactivate..
  • SLEEK, COMPACT DESIGN: The sleek, non-contact voltage tester designed by the innovative minds at IDEAL. Its compact design makes it ultra easy to use, even in tight spaces and it is packed with features that will help you on the job..
  • BATTERIES INCLUDED: (2) AAA Batteries included with voltage tester. Quick and easy battery replacement — with the tester in the middle position, simply pull apart the two case halves and replace with 2 AAA (LR03) batteries..
Check Stock