Best Voltage Meter Testers

Extech PQ2071 True RMS 1/3 Phase 1000A AC Power Clamp Meter

  • Meter operates as a True RMS Clamp Meter, Power Meter, Multimeter, and AC Voltage Detector.
  • Measures AC Current, Voltage, Frequency and Power including True Power, Apparent Power, Reactive Power and Active Power.
  • Measures 1-Phase/ balanced 3-Phase True Power (kW), Apparent Power (kVA), Reactive Power (kVAR) and Active Power (kWh),plus Power Factor/ Phase Angle.
  • Large dual backlit LCD display (9999 count) with bargraph.
Check Stock

allsun em3085a 3 3/4 Digits Auto Ranging Pocket Digital Multimeter Mini Electrical Mete AC/DC Ohm Volt Amp Capacitance Frequency Diode Continuity LCD Home Measuring Tool

  • Digital multimeter measures alternating current (AC) voltage and direct current (DC) voltage to 600 volts (V), resistance to 6 megaohms, capacitance to 2,000 microfarads, frequency to 30 kilohertz (kHz), and AC and DC microcurrent to 2,000 microamp.
  • Average-sensing meter provides accurate readings when measuring linear loads where the current or voltage has a sinusoidal waveform.
  • Non-contact voltage detector senses AC voltage without making contact with the circuit.
  • Meter measures 4.4 x 2.1 x 0.4 inches (H x W x D) and can be carried in a shirt pocket when not in use.
  • Meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category II installations up to 600V and category III installations up to 300V.
  • Safety: CAT II 600 V,CAT III 300 V,Pollution Degree 2, Class 2.
  • AutoTect feature directs the meter to know if it is measuring ac or dc volts or resistance with no user interface.
  • The AutoTect feature has lower input impedance which zeros out ghost voltages.
  • Voltect feature is a built-in, non-contact voltage detector.
Check Stock

Heitune Voltage Meter, D85-3050 Digital DC Voltmeter Ammeter Volt Amp Meter DC0-199.9V DC0-10.00A

  • The DC voltage and ammeter can display the measured DC voltage and DC current simultaneously on the same meter screen..
  • Wide measurement voltage and current range, DC Voltage: DC0-199.9V.
  • The measured DC voltage and DC current are completely isolated within the meter..
  • Suitable for chargers, inverters, solar energy, wind driven generator, LED light measurement, etc..
Check Stock

ZOTEK ZT-QS9 Inrush Clamp Meter TRMS 6000 Counts NCV Detector,Auto-ranging Amp Voltage Tester with Backlight Measures AC/DC Current AC/DC Voltage Capacitance Resistance Diodes Continuity

  • True-RMS clamp meter:This multimeter can accurately measure 600 Amp AC/DC Current,600V AC/DC Voltage.It is the perfect troubleshooting tool for....
  • Inrush Current Meter: The value of inrush current can help you locate a startup problem quickly, whether it's in the motor or in the starting....
  • Advanced features:The clamp meter has a low input impedance (LoZ) mode,which can provide higher accuracy readings..
  • NCV Detection & LED Flashlight: Built-in Non-Contact Voltage (NCV) Detector can easily and quickly determine whether there is a voltage.
  • Easy To Use:one-handed operation,With data hold and peak hold,Zero/Fire Wire Identification,Automatically shut down when the meter is not used for 15....
Check Stock

Frienda 2 Pieces DC 12 V Waterproof LED Digital Display Voltage Gauges Round Panel Car Voltmeters with Terminals Waterproof Voltmeter Battery Tester with Blue Light for Boat Marine Car Motorcycle

  • What you will receive: package includes 2 pieces DC LED digital display voltmeters and 4 pieces insulated terminals, adequate quantity can meet your....
  • Reliable material: the 12 V waterproof LED digital display voltage gauges are made of ABS and use flame-retardant materials, which is durable and....
  • Size details: the round panel car voltmeters are lightweight and portable, each voltmeter is about 37 x 41 x 29 mm/ 1.5 x 1.6 x 1.1 inches, suitable....
  • Practical function: with reverse connection protection, the blue light voltmeter battery testers can be applied to monitor the battery voltage, and....
  • Widely applicable: the voltage gauge with terminals are suitable for most kinds of 12 V voltage vehicles, such as automobile, motorcycle, bus,....
Check Stock

Baomain DDS238-4 (30-100)Single Phase DIN-Rail Kilowatt Hour kwh Meter 220V 100A

  • Rate Voltage:220V 230V 240V Rate Current:30(100A).
  • 220V Single Phase DIN-rail Kilowatt Hour kwh Meter.
  • Insulation Performance:AC voltage 2KV for 1 minute,impulse voltage 6KV.
  • Accuracy Class:Class 1 Starting Current:0.4%lb.
  • 35mm standard DIN rail installation,complying with standard DIN EN5002.
Check Stock

Auto Meter BVA-300 40 Amp Hand-Held Battery and Electrical System Micro-Processor Tester

  • Tests flooded, deep cycle, and AGM batteries with CCA range of 100-1600 - also detects discharged batteries, bad cells, and has built in reverse polarity protection..
  • Unlike competitor models, Auto Meter testers only require a single technician to run a full electrical system test due to our on-board 40 amp True Load cell. This eliminates the need to apply inconsistent loads, such as headlights, fans, etc. which makes our products easier to use and more accurate..
  • Automatically stores the last 100 tests in memory..
  • 30" - 16 gauge leads with professional grade clamps that are easily field serviceable..
  • Customer communication with optional PR-12 (external printer), PR-20 (bolt-on printer), or AC-12 (PC cable)..
Check Stock

Charge-Discharge Monitor, DROK 0-90V 100A DC Ammeter Voltmeter, Battery Capacity Amp-Hour Watt-Hour Power Time Multimeter, LCD Display Digital Voltage Current AH WH Watt Meter Tester with Hall Sensor

  • 7-IN-1 MULTIMETER --- measure and display voltage (0-90V), current (0-100A), power, battery capacity, amp-hour, watt-hour and time simultaneously..
  • APPLICATION --- can be used as battery charge-discharge tester meter for automobile and car battery.
  • as battery capacity monitor for photovoltaic system.
  • as voltage meter, current meter, power meter, etc..
  • BIDIRECTIONAL AMMETER --- the multimeter can detect current in dual direction without changing the wiring direction when used for monitoring charging and discharging..
  • PROTECTION --- over-voltage protection, over-current protection, over-power protection, over-charged protection, time limitation, etc..
  • automatically/manually switch off LCD screen.
  • with output control button to enable/disable output (requires a relay)..
Check Stock

KAIWEETS HT206B Digital Clamp Meter T-RMS 6000 Counts, Multimeter Voltage Tester Auto-ranging, Measures Current Voltage Temperature Capacitance Resistance Diodes Continuity Duty-Cycle (AC Clamp Meter)

  • True-RMS clamp meter: This voltage meter can accurately measure AC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household..
  • LowZ & LPF: Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformer. To measure the current you need to clamp the meter around one of the wires and not the whole power cord..
  • NCV Defection Function: Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires.
  • The NCV button lies on the right side. Simply place your thumb on it and push..
  • Multi-function: Two-color backlit LCD Display - When the voltage > 80V, the current > 3A, the LCD backlit screen turns red to warn you of high voltage/ LED Flashlight / Temperature Measurement for liquids and air conditioning ports included K-Type Thermocouple / Low Battery Indication / Auto power off after 15 minutes inactivity..
  • Safety Service: Safety standard IEC 61010-1, CAT III 600V. Double insulation. 36-Month produc....
Check Stock

Plugable USB C Power Meter Tester for Monitoring USB-C Connections - Digital Multimeter for USB-C Cables Laptops Phones and Chargers

  • AT A GLANCE - USB C Tester: Monitor USB-C power and charging. Measure voltage and amperage. Visualize the directional flow of electrical current.....
  • BIDIRECTIONAL - USB power meter can be connected in either orientation, allowing for the full range of USB Power Delivery voltage from 5 to 20V....
  • BROAD USB SUPPORT - Used as a data and power quality meter, device allows USB data pass through, USB-C Alt Mode video, USB-C charging. Use USB tester....
  • SMALL AND TOUGH - Small enough to go anywhere you need a USB C voltage meter. Even fits most phones and tablets without removing protective case.....
  • 2 YEAR WARRANTY - We love our Plugable products, and hope you will too. All of our products are backed with a 2-year limited parts and labor warranty....
Check Stock