Best Voltage Tester With Low Impedance Mode

Battery Tester Electronic Load 0.1-40A Large Current Lithium Battery Charge Discharge Capacity Tester, Time/Cut-Off Current/Manual Charge Discharge Termination

  • ... to computers, and more extended functions through online software..
  • 【AUTOMATIC BATTERY CAPACITY TEST】Charging method is standard charging, support nickel hydrogen, nickel chromium, lithium, iron lithium, lead acid. Support automatic charging - discharge - charging mode for testing battery capacity. LCD display: voltage, current, capacity, time, power, energy test data..
  • 【LARGE CURRENT BATTERY CHARGE DISCHARGE】This EBC-A10H battery capacity tester is designed to charge and discharge batteries within 5V at a large current, the maximum current it supports is 40A in charging and 40A in discharging. It can connect with a computer through a designated USB-TTL cable..
  • 【TECHNICAL PARAMETERS】Power Supply: AC 110V.
  • Discharging Termination: Time / Cut-off Voltage / Manual.
  • Charging Termination: Cut-off Current / Manual.
  • 【CAPACITY MEASUREMENT】Within 10Ah, the resolution is 0.001Ah.
  • Above 100Ah, resolution is 0.1Ah. (Package Includes: 1 x Battery Tester, 1 x....
Check Stock

Juried Engineering TL064CN TL064 Quad Low-Power JFET-Input Operational Amplifier Op Amp Breadboard-Friendly IC DIP-14 (Pack of 5)

  • Typical Supply Current: 200 µA (Per Amplifier), Latch-Up-Free Operation, High Slew Rate: 3.5 V/µs Typical.
  • Wide Common-Mode and Differential Voltage Ranges, Low Input Bias and Offset Currents.
  • Common-Mode Input Voltage Range Includes VCC+, Output Short-Circuit Protection.
  • High Input Impedance: JFET-Input Stage, Internal Frequency Compensation.
Check Stock

3 Pieces Voltage Meter Tester AC 12-1000V Non Contact Voltage Detector Buzzer Alarm Electrical Testing Led Flashlight Wire Tester Electrical Tool Battery Powered Tester Pen for Live Null Wire Judgment

  • High efficiency: the wire tester electrical tool(Batteries are not included) will send out a variety of alarms through sound and light, when a voltage is detected, the tip will light up and beep, which is easy to judge, saving time and energy.
  • The voltage pen tester uses a non-contact method to detect voltage, so you don't worry about the possibility of electric shock.
  • Sensitivity adjustment: this non contact voltage meter has 3 levels of sensitivity to choose from, the default is to enter the low level (buzzer beeps-once), press the [S] key to enter the middle range (the buzzer beeps twice), and press it again to enter the high level (The buzzer beeps three times), press again to return to the low gear (the buzzer beeps once.
  • Automatic shutdown function: when the ac voltage detector is not operated for about 5 minutes and no voltage signal is detected, the tester will automatically shut down.
  • The volt tester pen can be widely applied in circuit breakers, lighting devices, switches, sockets, wires and anywhere needed.
  • Low voltage indication: when the battery voltage is 2.6 V, the power indicator flashes 3 times, the buzzer will automatically shut down, please replace the battery in time.
  • You will get 3 electric current testers in the package, enoug....
Check Stock

Component Testers DC Electronic Load 0-60V 60A 300W 1slt(N3304A)

  • You can use mobile phone APP or PC control the tester PC Software Support PC Win 7 and Above, Phone Only Support Android (Android 5.0 and Above) Support 14 Kinds Language(English, German, Polish ,Chinese and So on )Product comes with Chinese and English help interface..
  • It can measure input Voltage, current, power, capacity, energy.Load access detection function, after the tester screen puts off, plug in the load and the screen will light up automatically..
  • Application in varieties of test:PC/Laptop/Desktop Computer/Mobile Phone/Power Bank/Charger/Discharge Load/Car Charger/Cable Impedance Measurement..
Check Stock

USB Tester Type C Meter - USB Digital Multimeter Amperage Power Capacity Reader & USB C Current Voltmeter & Voltage Monitor Tester & Amp Amperage Charging USB Detector Checker DC 0-30V/0-6.5A

  • USB Color Display Tester can monitor Voltage, Current, Capacity, Electric Quanity, Power,Temperature,Load Impedance, D+/D- Voltage, Charging Time and....
  • 1.USB-C male head replacement cost of copper pin contact plug better, tighter current data more reliable. 2.The screen 180 degrees flip display....
  • 4.The interface settings such as overvoltage, low voltage, overcurrent, backlight time, etc., and switch to the corresponding interface at the short....
  • 7. the built-in PD protocol can open the Type-C interface with the PD protocol's intelligent charger unloaded power output display, so as to....
  • Note: 1. This is no communication version. 2. PC software support PC window(Win 7 and above) and Android Phone(Android 5.0 and above, support 12 kinds....
Check Stock

Non Contact Voltage Tester Pen, Electrical Tools Electrical Tester AC 12-1000V/48V-1000V, LED Flashlight, Buzzer Alarm for Live/Null Wire Tester Judgment, Wire Breakpoint Finder

  • 【SAFETY FIRST】 : It will send out multiple alarms through sound and light. When the voltage is detected, the tip will send out red light and beep. When the higher the sensed voltage is, or the closer it is to the voltage source, it beeps at a higher frequency. At the same time, the light will be red or yellow, red means high voltage and live wire are detected, yellow means low voltage and null wire are detected..
  • 【Accurately Multi-ranging Measurement】The electrical tester accurately detects AC Voltage ranging from 12V to 1000V, and distinguish them into 2 Voltage levels (low, high). NCV sensitivity automatically adjusts from low and high while indicating Voltage level with audible beep..
  • 【High Efficiency】 Press and hold the switch for two seconds to start the machine, As Long As Voltage is Detected, the Led in the Tester Pen will Shine.
  • 【COMPACT DESIGN】 Bright LED flashlight for work in dim ares.
  • Low-Power-Indicator when battery voltage is below 2.5V.
  • Automatic Power Off after 3 minutes without operation or signal detection.
  • Pocket-sized, pen hook allows you to carry it in your shirt pocket..
  • 【SECURITY LEVEL】 IEC rated CAT III 1000V CAT IV 600V, Meets CE requirements.
  • The electrical tester is safely double insulated. High Voltage Aler....
Check Stock

Electronic Load Battery Capacity Tester, EBC-A40L 5V High Current Lithium Battery Capacity Tester 40A Manual 200W CC/CP

  • EBC-A40L Electronic Load Battery Capacity Tester Charge / Discharge 40A 200W.
  • Voltage Range:0-5V,Voltage Accuracy:0.2%+-0.003V, Current Range:0.1- 40A ( Max charging current is 40A ) , Current Accuracy:0.2%+0.01A.
  • Discharging Mode:CC/CP, Discharging Termination:Time/Cut-off Voltage/Manual, Discharging Power:200W Max.
  • Charging Mode:CV, Charging Termination:Cut-off Current/Manual, Heat Dissipation:Fan, Power Supply:AC110V.
  • Package Included: 1 x Battery Tester,1 x Online cable, 1 x Testing cable, 1 x Power supply cable.
Check Stock

EBC-A40L Battery Tester Electronic Load 0.1-40A Large Current Lithium Battery Charge Dischage Capacity Tester, 0-5V Fe Battery Cyclic Tester

  • 【Product Parameters】 Voltage range: 0-5V voltage, accuracy: 0.2%+-0.003V, current range: 0.1-40A (maximum charging current 40A), current accuracy: 0.2%+0.01A, discharge mode: CC/CP, Discharge termination: time/cutoff voltage/manual, discharge power: 200W Max, charging method: CV constant current and constant voltage charging, charge termination: cutoff current/manual, heat dissipation: fan, power supply: AC110V..
  • 【Practical Tester】EBC-A40L is an electronic load with charging function. It is suitable for charging and discharging capacitance test of various batteries, mobile power supply discharge test, charging head power performance test, supports connecting to a computer, and realizes more extended functions through online software..
  • 【Automatic Test】The charging method is standard charging, and supports nickel-metal hydride, nickel-chromium, lithium, iron-lithium, and lead-acid. Support automatic charge-discharge-charge mode to test battery capacity. LCD display: voltage, current, capacity, time, power, energy test data..
  • 【Excellent Performance】This EBC-A40L battery capacity tester is designed for high current charge and discharge within 5V, it supports a maximum charge current of 40A and discharge of 40A. It can be connected with a com....
Check Stock

ANENG Clamp Meter Multimeter Tester Auto Ranging TRMS 6000 Counts AC/DC Current Voltage Ohm Volt Amp Meter Meansures NCV Continuity Diode Resistance Capacitance Null/Fire Wire Electrical Tools

  • 【Great Helper】True Rms 6000 Counts Non contact voltage tester is a perfect troubleshooting amp meter tools, you can accurately troubleshoot vehicle or internal electrical problems in a fraction of the time and get the job done more efficiently.The continuity tester made troubleshooting become more easy. Would make a great gift for any DIY’er and the smart mode makes it simple for older folks!.
  • 【Accuracy & Multi-function】Aneng multimeter can measure ac/dc current, ac/dc voltage, live/zero wire,serve as continuity, resistance, and capacitance tester. It can also measure non-contact voltage detection and buzzer alarm,temperature, frequency, and duty cycle with less error & more accuracy. Backlight LCD screen and clamp head lighting with one hand operation trigger, it’s easy to use even if the ambient light is too dark..
  • 【Double Open Clamp &】The maximum wire diameter that the ANENG Clamp Multimeter can measure is 1.24 inches without interrupting the circuit. Double open jaws meet your operating habits..
  • 【Power Saving & Portable】The voltmeter will automatically enters sleep mode after 15 minutes of inactivity for energy conservation,where it can handle the demands of a long workday,The design for the tester is small enough to fit in ....
Check Stock

Klein Tools 80092 Electrical Tester Kit and Inspection Kit with Circuit Breaker Finder, Voltage Tester, and Test Leads, 6-Piece

  • BEST SELLERS in convenient kit include three testers with leads for electrical test and measurement applications.
  • Digital Multimeter, Non-Contact Voltage Tester with Flashlight, and GFCI Receptacle Tester.
  • VARIETY OF FEATURES on the Digital Multimeter MM320 measures up to 600V AC/DC voltage, 10A DC current and 2MOhms resistance.
  • also tests batteries, diodes, and continuity.
  • DUAL-RANGE TESTING CAPABILITIES allow Voltage Tester NCVT3P to detect from 12 to 1000 VAC or 70 to 1000 VAC for a broad variety of low-voltage or standard voltage applications.
  • DETECT WIRING CONDITIONS on GFCI Receptacle Tester RT250 which features a large backlit LCD readout of voltage, and clear indication of wiring conditions, with patent pending detection of Open Neutral / Open Ground wiring faults.
  • CIRCUIT BREAKER FINDER quickly and accurately locate the correct circuit breaker in a panel corresponding to the circuit to which an electrical outlet or fixture is connected.
Check Stock