CHANCS Mini Electric Motor 775 DC 12V/24V With Drill Chuck and PWM DC Motor Speed Controller
This is a DIY combination of motor, bracket, B10 drill chuck，and 20A PWM speed controller, it can be used with a saw blade to become a mini saw..
【The specification of motor:】 Rated Voltage: DC 12V, Unloaded Speed: 10000RPM, Load Speed: 8800RPM. Rated Voltage: DC 24V, Unloaded Speed: 20000RPM, Load Speed: 17600RPM. Starting current: 4-5A Motor Body Diameter: 42mm, Motor Body Length: 66.5mm, Shaft Length: 16mm, Shaft Diameter: 5mm..
【The specification of bracket:】 Length: 50mm, Width: 52mm, Height: 53mm, Mounting hole diameter: 4mm, Thickness of bracket: 3mm..
【The specification of the speed controller:】 Input Voltage: DC 10V-DC 60V (Ultra wide working voltage)； Output voltage: linear under load； Control Power: 0.01-1200W； Rated Current: 10A； Max Current: 20A (Long-term use of 10A, 450W or less, pay attention to keep the module free of heat dissipation conditions.)； PWM Duty Cycle: 0%-100%； PWM Frequency: 25Khz； Product Size(L x W x H): 77*45*28mm；.
【Attention:】 1.About the PWM, please do not connect AC power directly(Such as:110V AC),the input volt of this controller should be DC 9V-60V,otherwise it will be burned out. 2.Make sure the positive and negative connections are correct before powering on the motor speed contro....
Hantek DC Power Supply 32V 6A Adjustable Programmable Multiple Storage Functions Low Noise Precision Digital Lab Bench Power Source Stabilized Voltage Regulator with Short Circuit Alarm
【List Programmable】 In the list mode, the required voltage and current can be easily adjusted through the coding knob setting the 10 sets of voltages,currents,the parameters can be set according to your demands, fast storage, convenient to call at any time.
【Higher Sensitivity & Precision】The voltage output is 0-32V, and the current output is 0-6A, four-digit display voltage and current, resolution up to 10mV/1mA, can make the voltage and current in the test more accurate.Good power stability and ripple coefficient, it can precisely sense the location of voltage and current.
【10 groups of storage/memory and recall function】10 groups of commonly used current and voltage data can be stored at will, and can be recalled at any time. Adjust to the voltage and current data to be stored, and then long press the corresponding storage key to store the data.
【Multi-protection functions】The Power Supply comes with over voltage, over current, overload, overheating, short circuit protection functions.
The built-in low noise temperature control fan,prolonging the life of product effectively.
On/Off output control, one-button panel lock function to prevent misoperation.
【Multifunction】Standard USB quick charge function, support a variety of quic....
60 amp MPPT Charge Controller 12V/24V/36V/48V, Solar Charge Controller mppt Max 160VDC Input LCD Backlight Solar Charge for Sealed Gel AGM Lithium Battery
60A MPPT Charge controllelr, 100% MPPT 60A solar charge controller Intelligent, Max efficiency ≥98.1%, PV utilization ≥99%.Built-in DSP controller with high performance Automatic battery voltage detection 12V/24V/36V/48V, Make sure batteries' voltage more than 12V to boost controller and make sure battery has enough power to Self-detection when connected to the controller..
Fit for 12V/24V/36V/48V battery, USER(can be set Lithium, Lifepo4, Li(NiCoMn)O2)/Flooded/Sealed/Gel battery, User programmable for absorption voltage/Floating voltage/Low voltage disconnect./Load Timer..
Built-in cooling fan, Fan will ON when temperature 003e45℃ and off 003c 40℃,Porous heat dissipation and fan use BEARING technologies increase life UP TO 5000hrs in normal use..
Very detail display with Blacklight---LCD Dispaly PV voltage/output power/Battery voltage/charging current/working mode/Temperature, ☀ TROUBLESHOOTING function and LCD display and can help users not only check the whole system operating data and statuses but also quickly identify system faults and modify parameters..
Adjustable Digital display 10-55V 60A PWM DC Brushed Motor Speed Controller Switch Control 12V 24V 36V 48V Forward Brake Reverse For power wheels regulation (60A PWM)
The input voltage must be equal to the rated voltage of the motor.Wide Voltage: Wide voltage input 10-55V, maximum output current 60A,Continuous current: 40A..
Digital display :Motor Rotation Speed Percentage 0~100% ,Accurate adjustment speed.Adjust Output Current Control Motor Speed.
Speed Control Knob:Stepless speed regulation ,and with Forward-Brake-Reverse Switch.Only Work for Brushed Motor..
Notice 1: The power of the input power supply must be greater than 1.5 times the rated power of the motor to make the motor work (note: the input voltage and the rated voltage of the motor must be consistent)..
Notice: If there is a forward-reverse circuit regulator on the children's car, please be sure to connect the speed controller between the power supply and the forward -reverse circuit regulator of the children's car. Otherwise, the speed controller may be damaged..
Armacost Lighting 840240 for LED Lighting, with Removable AC Cord, 24 Watt, White
Provides smooth, full range flicker-free dimming for 12-volt LED Lights such as LED strip lights, modules, light bars, puck and other LED strip lights.
Compatible with BOTH 120 Volt AC dimmers and lighting controls and low-voltage DC dimmers and controls.
Works with Armacost low-voltage dimmers and RGB color controllers.
Input Voltage: 100-120v AC 50/60Hz, λ=0. 65C, output Voltage: 12V DC constant Voltage, 24 watts, 2a max.
For optimal AC dimming performance, use a forward phase CL-style or equivalent dimmer. The use of reverse phase or ELV may degrade dimming performance.
Connect up to 100% of the rated 24-watt maximum load – derating performance is not required.
ETL listed, complies to UL standard 1310 and 8750, certified to Canada CSA standard C22. 2 no. 223-M91 and C22. 2 no. 250. 13, complies with FCC part 15B.
10000W SCR Digital Voltage Regulator,AC 220V 80A Electrical Motor Speed Controller Regulator, High Power Voltage Regulator Dimming Thermostat
10000W resistance load limit power, room temperature for a long time is recommended to be used within 5000W, voltage regulation: AC 10V to 230V (adjust begin 20V), this is an easy-to-use voltage regulator that can control the brightness or speed of the light. Use a new bidirectional high-performance thyristor. The current can reach up to 100 A, and solves the problem of overcurrent caused by small resistance when the induction cooker cable is cooled..
10000W SCR voltage regulator standard aluminum housing safe and durable super power electronic voltage regulator. It is widely used in resistive loads, such as heating wires, incandescent lamps and most (not all) single-phase AC motors..
10000W speed controller operating voltage AC 110V-230V. Maximum power 10000W (resistive load), long term operating power 7000W. Voltage adjustable from AC 0V to near input voltage. Full copper 75A super large current terminal. The trigger circuit is unique, the control voltage is accurate and there is no hysteresis, the resistive load is turned off to 0, and after starting, it will be adjusted from 10V, adjust to the supply voltage that is closest to the input..
Connect the SCR voltage regulator to the front of the circuit of the electrical appliance. The ''input' and """"....
PowMr MPPT Charge Controller 60 amp 48V 36V 24V 12V Auto - Max 160VDC Input LCD Backlight Solar Charge for Vented Sealed Gel NiCd Lithium Battery【Software Update Version】(MPPT-60A)
❶【Software Update Version】100% MPPT 60A solar charge controller Intelligent, Max efficiency ≥98.1%, PV utilization ≥99%.Built-in DSP controller with high performance Automatic battery voltage detection 12V/24V/36V/48V, Make sure batteries' voltage more than 12V to boost controller and make sure battery has enough power to Self-detection when connected to the controller..
❷Fit for USER(can be set Lithium, Lifepo4, Li(NiCoMn)O2)/Vented/Flooded/Sealed/Gel/NiCd battery.User programmable for absorption voltage/Floating voltage/Low voltage disconnect./Load Timer. Real-time energy recording..
❸Blacklight LCD Dispaly PV voltage/output power/Battery voltage/charging current/working mode/Temperature, ☀ TROUBLESHOOTING function and LCD display and can help users not only check the whole system operating data and statuses but also quickly identify system faults and modify parameters..
❹Intelligence Fan-on temperature 003e45℃ and off 003c 40℃,Porous heat dissipation.and fan use BEARING technologies increase life UP TO 5000hrs in normal use..
❺【What You Get】we consider that the larger diameter of the wire will be greater cost for customers, so we designed two connectors for each pos and negs on solar and batteries connectors. copper wires:9....
AmicoPower MMA-200,200 Amp Stick Arc Lift-TIG DC Inverter Welder,110 and 230V Welding Machine
Advanced IGBT inverter technology, excellent Arc stability, hot start, anti-sticking, forces adjust, steeples amperage control, all generators....
Automatic compensation for voltage fluctuation, over voltage protection, under voltage protection, over current protection, over load protection..
Fan automatic temperature control, intelligent fan control operates when welding commences to cool components and reduce airborne contaminants pulled....
This is specially designed welding machine, can use all electrode, with force adjustment function..
110V/230V dual voltage input. All machines tested in the USA and one-year warranty..
Amico MMA-180 Amp Stick ARC DC Inverter Welder Digital Display LCD 110V & 230V Dual Voltage Welding Machine.
Advanced IGBT inverter technology, excellent Arc stability, hot start, anti-sticking, forces adjust, steeples amperage control, all generators....
Automatic compensation for voltage fluctuation, over voltage protection, under voltage protection, over current protection, over load protection..
Fan automatic temperature control, intelligent fan control operates when welding commences to cool components and reduce airborne contaminants pulled....
This is specially designed welding machine, can use all electrode, with force adjustment function..
110V/230V dual voltage input. All machines tested in the USA and one-year warranty..
