Upgrade Oil Change Pump Extractor, 12V 60W Motor Oil Diesel Fluid Transfer Pump Quick Oil Extractor Pump Scavenge Suction for Car Boat Motorbike Tractor Truck RV ATV
HIGH EFFICIENT: This oil transfer pump is an ideal equipment for quick easy and clean safety oil-changes. Flow Rate: 3L/min flow rate for engine oil, 4L/min for diesel. Voltage: 12V, maximum current: 5A, maximum power: 60W..
APPLICATION: This oil pump can change engine oil and diesel for cars, tractor, boat, motorbike, truck, RV and ATV and other 12V vehicles..
EASY INSTALLATION: You just need to place the inlet/outlet hoses at the appropriate positions, tighten the hose clamps, connect the power clamps anode and cathode to the car battery properly and press the button. Oil will be extracted by itself..
NOTE: To pump oil properly, please start the vehicle to heat up the oil (to 40~60 degrees)about 15 minutes. Otherwise, the oil change pump may have low suction or jammed..
WARNING: This oil pump is not use to extract water, gearbox-oil(too viscous) or flammable liquids (fuel, petrol etc)..
PLUMIA 12V 100W Oil Change Pump Extractor, Upgraded Oil/Diesel Fluid Pump Extractor Scavenge Suction Transfer Pump, Marine Electric Oil Pump, For Boat, Car, Motorcycle, ATV, RV, Truck, Motorbike
【QUICK AND CLEAN OIL CHANGES】- Portable and small oil pumps are needed by everyone, simple operation does not need to spend too much time to practice, widely used in motorcycles, Car, scooters, Boat, quad bikes, trucks, Ship, forklifts, Marine, Power generation machinery, tractors, lawn mowers and various machinery to change the oil..
【SAFE OPERATION】- Except for engine oil and diesel, the oil pump must not draw any flammable liquid or water to avoid accidents. Before use, be sure to heat the car engine to 104 ° F-140 ° F, Avoid clogging the oil pump due to oil solidification..
【ENGINE OIL CHANGE MADE EASY】 - DC 12V 100W has enough power, you only need to clamp the conductive clip on the motor and open the switch to start it, so that you can complete the oil pumping work smoothly and effectively, replacing the traditional oil change method and reduce tedious workload (diesel flow: 1.7L / m, oil flow 0.35L / m)..
【ACCESSORIES & PRECAUTIONS】- The oil pump has 2*outlet hose, 2*inlet hose, 4*hose locks,1*screwdriver, 1*Oil-proof gloves, 2*battery clips, 1*user's manual. Please pay attention to the direction of import and export, positive and negative poles and lock hose lock before use. The suction power of the micro suction pump is limite....
DRIVESTAR M340 Engine Oil Pump 2004-2008 for Ford F-150/Expedition/Explorer/Mustang,for Lincoln Navigator/Mark LT 5.4L 4.6L
Fitment:Oil Pump for Ford 2005-2014 Expedition,2006-2010 Explorer,2007-2010 Explorer Sport Trac,2004-2010 F-150,2005-2010 F-250 F-350 Super Duty,2005-2010 Mustang,for Lincoln 2006-2008 Mark LT,2005-2014 Navigator,for Mercury 2006-2010 Mountaineer.
Deliver Oil:The oil pump can deliver a fixed quantity of pressurized oil to the engine, and keep it running smoothly. Which mean that your engine could always get the right amount of oil pressure, and the critical engine parts wouldn’t be rub together, or cause extensive and damage.
Strict Ex-Factory Testing:All products are manufactured in accordance with the international automotive spare parts production specifications, and passed strict testing before leaving the factory to ensure that each product quality is superior.
Note:When the certain engine parts don’t get enough oil, the engine may start to make tapping, knocking or rattling noises. Loss of oil pressure can prevent a vehicle from starting. And it’s time for a replacement of your failing oil pump..
Lotyes Quick Oil Change Pump, DC 12V 60W Oil Diesel Fluid Pump Extractor Transfer Pump & Tubes Kit for Car, Boat, Motorbike, Truck, RV, ATV and Other Vehicles
Efficient Extraction Pump: To pump your motor oil properly, please start the vehicle to heat up the oil (to 40~60 degrees)about 15 minutes! Otherwise, the oil change pump may have low suction or jammed. Lotyes oil change pump replaces manual operation and works by connecting the clamps to the vehicles 12V battery. It's high efficiency, rapid and saving effort..
Clean and Tidy: An ideal equipment for quick and clean oil changes. No more mess tools needed, the hoses and hose clamps in the package can prevent leakage during the extraction process..
Easy installation: Install the oil extractor inlet and outlet hose, tighten the hose clamps, connect the power clamps to the vehicles battery and switch the button on..
Versatility: This oil transfer pump can change engine oil and diesel for cars, boat, motorbike, truck, RV and ATV and Other Vehicles. WARNING: THIS PRODUCT CAN NOT USE TO EXTRACT WATER, GEARBOX OIL OR FLAMMABLE LIQUIDS(SUCH AS FUEL,PETROL,GASOLINE,ETC)..
What You Get: Lotyes oil extractor pump, outlet hose, inlet hose, hose clamps, battery clamps, user guide. We are certain that you will love the design and high quality of the product. Because you are our number 1 priority, we are offering premium customer support and money-back service for a risk....
Carefree Car and Boat Care: Easily remove engine oil, transmission fluid, power steering fluid, gear oil, coolant, and more with this versatile fluid evacuator pump.
Double Duty: For pneumatic extraction, insert the suction hose in the vacuum extractor pump receiving hole.
Manually suction fluid with the engine oil pump's oversized handle.
Don’t Cry Over Spilled Oil: The 9.5-gallon reservoir is a solid one-piece tank that can't leak out the bottom.
The built-in shutoff prevents overfilling the extractor pump reservoir.
Time Flies: Draining oil from beneath a vehicle takes eons.
The fluid pump's 5ft hose and dipstick adapter extracts automotive fluid directly from the dipstick tube.
Under Pressure: Change transmission fluid anytime with the pneumatic and manual pumping options.
This fluid extractor pump works at 85 PSI and a max pressure of 120 PSI.
10000 psi Hydraulic Hand Pump 2 Speed Power Pack Hydraulic Lifting Pump
Maximum operating pressure of 10,000 pounds per square inch (psi)，Two-speed Plunger Improves Pump Efficiency By 70%.
Advances and releases design for applications with a constantly applied load Pressure relief valve (Oil return knob)helps prevent pump overload, switch( venting nut) on the tail of it avoid sealed of oil box.
Oil capacity: 700cc, 2M high pressure hose ，oil pipe coupling with PT3/8 thread.
Manual Hydraulic Pump is durable, smooth surface and good sealing performance. Integral Casting Pump Body, Durable, Stable And Reliable.
High-pressure hydraulic hand pump for 5 ton to 200 ton hydraulic ram cylinders or split unit hydraulic puller and other hydraulic applications.
DRIVESTAR M295HV High Volume Engine Oil Pump for Chevrolet Silverado 1500/ Express 1500,4.8L 6.0L
Fitment - Oil Pump for Chevy/GMC.More detailed information please check Part Finder.Thanks.
Deliver Oil - The oil pump can deliver a fixed quantity of pressurized oil to the engine, and keep it running smoothly. Which mean that your engine could always get the right amount of oil pressure, and the critical engine parts wouldn’t be rub together, or cause extensive and damage.
Strict Ex-Factory Testing:All products are manufactured in accordance with the international automotive spare parts production specifications, and passed strict testing before leaving the factory to ensure that each product quality is superior.
Please Note – When the certain engine parts don’t get enough oil, the engine may start to make tapping, knocking or rattling noises. Loss of oil pressure can prevent a vehicle from starting. And it’s time for a replacement of your failing oil pump..
