Gas Power Pole Saw, 2 Stroke Garden Trimming Tools, 90.5\ Cutting Power Pole Saw with Single-Cylinder Gasoline Engine for Outside Yard Tree Wood Cutting (43CC - 2 Stroke)
Suitable Gas Trimmer: With it, you no longer need to risk climbing up a ladder or tree to trim branches. With its powerful 52cc engine, it gets the pruning job done easily and quickly. Its compact saw head can easily reach any corner without leaving a single weed or excess leaf behind..
Low Fuel Consumption: With a fuel consumption rate as low as 480g/kw.h, it is very economical as it does not consume large amounts of fuel even after long periods of use..
Safer: With this high branch saw you don't have to climb up the high trees to cut branches. The pole of this high branch saw is 90.55in long, so you can easily saw off high branches while standing on the ground, which is much safer for the user..
Great Durability: This high branch saw is mainly made of sturdy and durable aluminum alloy. This material will be uneasy to deform and rust. So the high branch has a long service life and you can use it with confidence..
Large Fuel Tank: The fuel tank has a capacity of 0.32gal, allowing the engine to work for long periods of time. You don't have to refill the tank frequently, which is very convenient..
Application: This gas trimmer is suitable for agriculture, forest firefighting, gardening, and other fields for sawing off high branches, small trees, etc..
Bosch Professional adapters for the FSN OFA guide rail (for use during guided routing with Bosch FSN guide rails)
...is kit is intentionally made in the SAFETY ORANGE color for high visibility when in use. This provides the user the ability to see exactly there hands are at during the cutting or milling process. Being SAFETY ORANGE also allows for you to easily find the device when its not in its normal location..
The general idea behind these safety devices is to help you guide and control your stock when feeding through a table saw, band saw, jointer or a router table. The push blocks are generally used on jointers and some router applications, while the push sticks are primarily used on table saw projects. All five devices help prevent kickback and protect your fingers and hands during your cutting process.
Soft, receptive, rubber foam pads line the bases of the two small push blocks and the large push block. The rubber soles make pushing and controlling your stock much easier and safer then when doing it by hand. The soles are also washable with with warm water. Must let the rubber soles dry for 24 hours prior to using them again..
The 5 piece safety kit includes 2 each small push blocks (1 angled handle and 1 offset handle small push block), 1 each long or large push block, 1 each standard width push stick and 1 narrow width safety-v push stick..
Thin Rip Jig Table Saw Jig for Making Repetitive Narrow Strip Cuts on Table Saws with 3/4\ x 3/8\ Miter Slots • Also Works with Many Router Tables and Band Saws
...row cuts that are about an 2 inches or less in width? Doing this can get tricky since you cant get your hands safely between the blade and the fence. You could always reverse measure and keep the off fall piece, but without a guide of some sort that can be inaccurate..
The Thin Rip Jig acts kind of like a third hand behind the blade or cutter. With the saw unplugged simply measure from the outside of of the blade toward the tip of the (guide roller) Thin Rip Jig for the width cut you want to make. Once set, secure the Thin Rip Jig simply by rotating the large, easy to grip star shaped knob. After your first cut, reset your stock behind the blade and slide the fence over so your stock piece is touching the guide roller on the Thin Rip Jig. Lock the fence..
Making your thin rip cuts in this fashion allows you to cut wider boards down without getting your fingers in harms way by keep them away from the blade or cutter.The Thin Rip works much like a feather except that it doesn’t exert spring like pressure against the board. This means it can be used to make accurate, repetitive cuts since it’s essentially just holding its spot once it is secured..
The Thin Rip Jig has a roller guide bearing on the tip to make feeding your stock through an easy and smoo....
Delta Diamond Cougar HD 14 Inch Diamond Saw Blade, Supreme Grade, for Reinforced Concrete with Rebar, Masonry, Stone, Laser-Welded, Segmented-Turbo, .125 Width X 1\-20mm Arbor (14\)
USE WET OR DRY - The core is made from heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting..
SPECIFICATIONS - 14" diameter X .125 (1/8") thick and has a 1" arbor hole, 3/8" drive pin hole and 20mm bushing. Max 5,460 rpm. For use with hand-held power saws or walk-behind saws up to 35 HP. The 3/8" core holes are used as depth indication as well as cooling and dust/slurry removal..
LIFETIME WARRANTY + FREE RETURN SHIPPING - All Delta Diamond Products, Inc. diamond blades, coring bits, hole saws and cup wheels feature a lifetime limited warranty against warping, cracking and/or material defects. If any diamond tool (being used for its intended purpose with at least 50% of the wear remaining) fails to perform properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the tool will be replaced at no charge..
Edsrdux DIY Table Saw Crosscut Sled Kit, Smooth No Residue, for Crosscut sleds Jigs, Fixtures or Miter Slots (Size 3/4" x 3/8").
...ey are commonly used as runners for crosscut sleds. Another benefit is that UHMW does not expand or contract like wood during extreme weather changes. Each bar measures about 3/4" x 3/8" and fits most standard table saw slots. UHMW bars are also slick and will not leave any residue, dust, or shavings behind, as do wooden bars..
Outstanding Impact Strength: Even at low temperatures, jigs, fixtures or miter slots (3/4” X 3/8”) – ideal for table saw, band saw or router table..
Please Take Note: UHMW poles tend to bend during shipping, but don't worry.
Fulton Safety Woodworking Push Block and Push Stick Package 5 Piece Set In Safety Orange Color, Ideal for Woodworkers and Use On Table Saws, Router Tables, Jointers and Band Saws
...is kit is intentionally made in the SAFETY ORANGE color for high visibility when in use. This provides the user the ability to see exactly there hands are at during the cutting or milling process. Being SAFETY ORANGE also allows for you to easily find the device when its not in its normal location..
The general idea behind these safety devices is to help you guide and control your stock when feeding through a table saw, band saw, jointer or a router table. The push blocks are generally used on jointers and some router applications, while the push sticks are primarily used on table saw projects. All five devices help prevent kickback and protect your fingers and hands during your cutting process.
Soft, receptive, rubber foam pads line the bases of the two small push blocks and the large push block. The rubber soles make pushing and controlling your stock much easier and safer then when doing it by hand. The soles are also washable with with warm water. Must let the rubber soles dry for 24 hours prior to using them again..
The 5 piece safety kit includes 2 each small push blocks (1 angled handle and 1 offset handle small push block), 1 each long or large push block, 1 each standard width push stick and 1 narrow width safety-v push stick..
