Warranty: 1-YEAR / 365-DAYS UNLIMITED MILEAGE WARRANTY. ALL THEBIGDEALS oxygen sensors are extensively tested during manufacturing to guarantee....
Interchange Number: Replaces# 234-4209 15733 Length (Sensor to Lead):360 mm (14.17 in). Directly Fit your vehicle when the plug and the length is the....
Servicing Intervals: Harmful contaminants maybe present in your vehicle's exhaust stream can significantly reduce the life span of an oxygen sensor.....
Bank 1 Sensor 1 means Upstream Right/Rear.
Bank 2 Sensor 1 means Upstream Left/Front.
Bank 1 Sensor 2 means Downstream Right/Rear.
Please check the description or use the year/make/model drop down bar and interchangeable part numbers to confirm the compatibility before purchasing.....
Procom Fireplaces 29 in. Ventless Dual Fuel Firebox Insert FBNSD28T
ASSEMBLED IN USA - Product is proudly assembled in the USA. Skilled American workers manufacture the parts, assemble, and test our products. Only high-quality materials and parts are used in the manufacturing of our products. Our factory features state of the art manufacturing equipment..
TECHNOLOGY - Maximum 26,000 BTU Patented Dual Fuel Technology using Natural Gas or Liquid Propane which Heats Up To 1,350 Sq. Ft..
DEPENDABLE - Thermostat Control - Automatically cycles on and off to maintain desired setting..
STYLISH - 5 realistic hand painted Ceramic Fiber Logs..
SAFE - Battery assisted Piezo ignition with Built-in pilot Oxygen Depletion Sensor (ODS) immediately shuts down the heater if carbon monoxide or lack of oxygen is detected..
Bosch 17014 Original Equipment Wideband Oxygen Sensor - Compatible With Select Rolls-Royce Phantom Vehicles
[INNOVATIVE TECHNOLOGY] - Every Bosch Oxygen Sensor benefits from the technological and manufacturing experience gained from decades of production since first inventing the Oxygen Sensor in the late 1960's, ensuring long-lasting, superior performance.
[FACTORY TESTED] - Seared appearance of protection tube is a result of a 100 percent fully functional quality test to ensure every Bosch manufactured sensor meets Bosch's rigorous standards for quality and performance.
[STAINLESS STEEL BODY] - Exclusive double laser-welded stainless steel body is totally submersible and sealed tight to protect against contamination from exhaust emissions — ensuring longer sensor service life.
[FAST ACTING HEATER] - Fast-acting heater optimizes sensor operation, allowing the oxygen sensor to reach its operating temperature quicker – within seconds – for optimum performance.
[READY TO INSTALL] - True Direct-fit OE connectors and harnesses, along with threads pre-coated with anti-seize compound right out of the box, make installation simple and hassle-free.
Compatible with select 2004-06 Rolls-Royce Phantom vehicles (verify specific fitment details with AmazonConfirmedFit fit checker above).
HYAT 5pcs Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set
Ideal for removing and installing oxygen sensors and vacuum switches on vehicles with computer-controlled engines.
3 Different types of sockets cover various situations of oxygen sensor locations.
Universal 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar.
Special side cutout design allows easy access to oxygen sensor from any section and prevents damage to wires.
Set includes: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
ATPEAM Oxygen Sensor Socket Set 3 Piece O2 Sensor Socket Set Oxygen Sensor Removal Tool Set 1/2in and 3/8in Sq Drive
Extra Durable: Constructed of heat-treated chrome vanadium steel, this oxygen sensor remover set is built for strength, durability, and longevity.
Application: Sockets O2 Sensor Tool Set lets you quickly and easily remove oxygen sensors, oil pressure sending unit, fuel injectors, and vacuum switches.
Features: 3/8-inch or 1/2-inch square drive to fit your O2 sensor wrench drives.
For use with ratchet, breaker bar, or hand wrench (driver tools not included).
Specification: The specification for these oxygen sensor sockets are: 1pc 3/8 inch Drive 7/8 inch (22 mm) Deep, 1pc 3/8 inch Drive 7/8 inch (22 mm) Crowfoot, and 1pc 1/2 inch Drive 7/8 inch (22 mm) Deep Crowfoot Sockets, 1pc plastic red or blue carrying case.
Wide Application: Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines.
Motorcraft DPFE6 Exhaust Gas Recirculation Pressure Feedback Sensor
...68AB, F81Z-9C968-AB, F5TZ9C968A, 1841217C91, 1829856C91, 1836412C91, 1841086C91, CM5013, CM-5013 for a proper fit, include IPR Valve and ICP control sensor seal kit..
[Durable] - Every 7.3 IPR fuel injection pressure regulator valve and ICP control sensor have passed undergoes more stringent testing than aftermarket products, engineered for long lasting performance, durability, and dependability..
[Installation] - 7.3L fuel injection pressure regulator IPR valve + ICP control sensor installation is super easy and direct fitment and perfect replacement, meets or exceeds OEM standards. We offer 2 years service, any questions about the product, pls contact us in time. We will reply to you within 24 hours.
[Service + Package include] - You will get a 24-month shelf life for 7.3 IPR valve + ICP control sensor. If you have any questions, please contact us at any time, we will reply within 12 hours, and we will give you a satisfactory answer. 1x 7.3L fuel pressure regulator valve, IPR. 1x 7.3L diesel injection control pressure sensor ICP with electrical connector and pigtail wire harness.
High Quality: A ABIGAIL Oxygen Sensor Features double protection layer, aluminum oxide trap layer, PTFE filter and stainless steel housing..
Interchange Part No.: A ABIGAIL Oxygen Sensor is Compatible with Bosch 15284 Denso 234-4668. This sensor will meet or exceed OEM standards, it is a direct replacement though it is NOT a genuine part..
Function:Lambda sensor can improve engine efficiency performance and fuel economy, reduce CO2 and other harmful emissions, extend expensive Catalytic ..
Performance: The metal shroud doesnot look as shiny as other Oxygen Sensors. Because it is made of SUS310 high temperature resistant material. And every single item is heated at 1562℉. The high temperature also mskes it stands wear and tear..
One Year Unlimited Warranty. Please use the Year & Make & Model drop down bar and check the wire length & plug & position to confirm the compatibility before placing orders. Please check your part pictures with our pictures, it must be completely same. Or it will not fit your car. It will save your time and cost. If you have any questions or the items you received with problems, contact us directly, we'll provide you with some professional suggestions within 24 hours..
ABN Oxygen 02 Sensor Socket 7-Piece Tool Kit – 22mm (7/8in), 27mm, 29mm – All Vehicle O2 Removal and Installation
NO MORE HASSLE: The ABN Oxygen 02 Sensor Socket 7-Piece Tool Kit – 22mm (7/8” Inches), 27mm, 29mm – All Vehicle O2 Removal and Installation is for inspection, removal, and installation of hard-to-reach oxygen sensors, oil pressure switches, oil pressure sending units, thermal sensor switches, vacuum switches, and brake light switches.
Each socket is permanently etched with size marking for your convenience.
MATCHES YOUR CAR: Universal fit for Audi, BMW, Citroen, Mercedes, Peugeot, Renault, Skoda, Vauxhall/Open (GM), and Volkswagen.
Sizes include 22mm (7/8”), 27mm, and 29mm.
For both heated and non-heated oxygen sensors.
Compatible with 3/8-inch and 1/2-inch ratchet drivers or extensions.
Side cutout sections allow the sockets to fit over wiring harness and prevent damage to wires.
BUILT TO LAST: Constructed from chrome-vanadium steel (CR-V) for extra strength and longevity.
Tools have a light coating of oil to protect them from rusting.
EASY STORAGE: Heavy-duty 9” x 2.25” x 8” inch (22.9cm x 5.7cm x 20.3cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
