Neewer Camera Phone Tripod, Mini Flexible Tripod Stand with 360° Ball Head and Phone Holder, Portable Travel Tripod, Compatible with 13 12 Pro Max, Android Smartphones/Mirrorless Cameras
【Flexible & Stable Tripod】 Neewer T10 Flexible Tripod with bendable tripod legs can wrap around objects and stand on uneven surfaces to provide reliable support for your DSLR camera, mirrorless camera, action camera, smartphone, and any compatible device weighing less than 1.8lb (0.8kg).
【360° Rotatable Ball Head】 The ball head with 360° rotation allows you to take photographs and record videos from any perspective. The rubber-padded mounting plate attaches your devices with the 1/4” screw and protects against scratches. A star knob helps you adjust and fix the ball head with ease.
【Practical Phone Holder】 The supplied phone holder fits smartphones 2.2”–3.6” (55–92mm) in width. With two 1/4” screw holes, it can mount on T10 in two directions. Push-buttons on the sides make you easily adjust the clamp’s opening.
【Compact & Portable】 11.2” (285mm) in closed length and 8oz (227g) in weight, T10 is portable and lightweight for photographers and filmmakers who are always on-the-go.
2 Pieces 41 mm QR Release Plate Camera Tripod Ball Head Quick Release Plate Replacement Compatible with Ambico V-0552 V-0554, Sunpak 7500 Pro 7500tm 7575, Kalimar Pro-tech V-40
Package content: 2 pieces of 41 mm black tripod quick release plates which are compatible with Ambico V-0550 V-0551 V-0552 V-0553 V-0554 (fluid type head only), Sunpak 7500 Pro 7500tm 7575, Kalimar Pro-Tech V-40, and so on.
Good workmanship: the camera mount adapter plates are made of PVC material and the middle anti-twist locking screw is made of aluminum material.
The surface is finely oxidized to give it a long service life, so you can use these camera mount adapter with confidence.
Standard anti-twist locking screws: these ball head quick release plates are equipped with standard anti-twist locking screws which conform to international standards, compatible with the standard for camera tripod ball heads.
Easy to install and remove: the quick release plates can be fixed to the camera base, which can save your time and facilitate the installation and disassembling of the tripod, easy for you to use.
How to install: depending on the card position position of the Pan/ Tilt/ Zoom, you can insert the tripod quick release plates directly for installation.
The quick release plates have a slotted screw that you can tighten with your fingers or coins.
UYODM 2Pack Solar Panel for Nest Camera (Battery),Power Your Nest Camera INOUTCAMW 1080p Indoor/Outdoor continuously- Silver
✔ DESINGN FOR Nest Cam: The solar panel has a built-in 2200mAh battery, which can be better Compatible with Nest INOUTCAMW 1080p Indoor/Outdoor Camera (Battery) , keep your Nest Cam continuous working, No more battery changing, no more power adapter needed.Not compatible with Nest wire Cam..
✔ WATERPROOF AND DURABLE: The solar panels are made of monocrystalline silicon and Anti-rust aluminum alloy, durable and long-lasting.Smooth enough to drain the rain and water drop. The magnetic charging head is just the same size as the charging port to prevent rainwater from entering.work temperature: 32°F to 122°F (0°C to 50°C)..
✔ 11.5FT LONG CABLE: If your camera and solar panel do not have an ideal installation location, a long enough cable will give you a lot of leeway. No need to worry the limit of distance..
✔ 360° ADJUSTABLE MOUNT: Aluminum alloy solid ball rotation design supports 360 degree adjustment.allowing you to perfectly position your solar panel to maximize sunlight exposure..
✔ PACKAGE LIST: 2 x Solar panel( 11.5ft/3.5m cable) + 2 x 360° secure mount bracket +6 x Installation screws + 6 x wall anchors..
BRCOVAN Aluminum Alloy 17mm Ball Handlebar Mount Base for Garmin GPS Mount & Motorcycle Bike Phone Holder
...sert allows you to install the ball base on the rear-view mirror frame or mini handlebar. The package also come with an 8cm non-slip tape and an Allen key..
▶ This 17mm(0.67 inch) ball handlebar mount base only compatible with 17mm ball socket component, including some double socket arms, navigation mounts, action camera mounts, bike & motorcycle phone mount holders and others electronic device holders. Suitable for installation on bike, bicycle, motorcycle, stroller, mountain bike, dirt bike, trek bike, road bike, golf cart, electric scooter, ATV, etc..
▶ Please note: This is 17mm(0.67 inch) ball base, not 1 inch ball base. It only compatible with 17mm ball socket systems. Works for Garmin Nuvi Dezl Drive Drivesmart Zumo Driveassist DriveLuxe StreetPilot RV GPS series devices with 17mm swivel ball mounting pattern..
SmallRig Tripod Ball Head 360 Degree Rotating Panoramic Ballhead with 1/4 inch Quick Shoe Plate, Max Load up to 5 kg/ 11lb, for Tripod Monopod Slider DSLR Camera Camcorder - 3034
SmallRig ball head has a precise 360° Panning Dial, which is easy to carry. It is an essential camera accessory for your amateur photography and outdoor travel records.Panoramic head with accurate calibration and independent pan knob for panoramic photography..
Mini ball head with knob supports multi-angle adjustment and quick switch between vertical shooting and horizontal shooting.Equipped with 1/4 screw, the removable quick release plate is suitable for SLR cameras. 3/8 screw hole at the bottom can be attached to tripod or monopod.
The tripod ball head comes with a standard plate for Arca-Swiss compatible with other clamps for Arca-Swiss ensures a quick mount/dismount of your device..
Low-profile ball head design creates a stronger locking force and higher stability. Screw knob is located on the side of the ball instead of the bottom of the ball head bring 15% down the whole center of the gravity of the Ball Head, enhance stability.
Max Load up to 5 kg/ 176.36 ounce, made of aluminium alloy material, it is very strong and durable.
JUSMO Camera Desk Mount Stand with 360° Ballhead, 14.5-37.7 inch Adjustable, Table Aluminum Light Stand with 1/4\ Screw Tip, Desk C-Clamp Mount Stand for DSLR Camera/Ring Light/Video Light/Webcam
DSLR desk mount stand with standard 1/4 screw can be mounted for the most cameras and lights which have a 1/4” adapter, such as ring light, DSLR camera, video camera, panel light, key light, webcam, Elgato Master Mount accessories..
Camera desk mount stand 14.5-37.7 inch adjustable. Gives you ample height for overhead shooting and lighting. Universal desktop light stand, 1.96 inch clip distance, compatible with most desk..
Desk clamp stand have removable ball head with an industry-standard 1/4" Screw allows you to expand your rig..
Clamp camera mount is made of sturdy and lightweight aluminum alloy, provides maximum stability and portable carrying..
NOTE: Webcam, Panel light, Ring light, DSLR camera Not included..
SUPON Super Clamp + Mini Ball Head Bracket Mount + 1/4' to 1/4' Screw and 1/4' to 3/8' Screw for Rig,Monitor,DSLR,Backdrop,Flash,LED Light,Light Stand,Bike,Motorcycle,Rod,Tripod,Action Cameras
SUPON Super Clamp is can fix on to any shaped body like cameras, lights, umbrellas, hooks, shelves, plate glass, bike, motorcycle, Rod, tripod, monopod, cross bars,etc. Combine with Ball Head Mount,it could attach and detach from the monitor quickly and the position of the monitor is adjustable as per your needs during shooting..
Comes with a mini Ball head Mount, with 1/4 inch Screw Mount, uses to mount accessories onto a flash bracket.
360-degree articulation,Ball head can be adjusted into most position, makes you a comfortable use. Perfect for DSLR Film Movie Rig, Monitor, Flash, LED Lights, Track Slider, Light Stand, Action Camera, etc..
1/4" To 3/8" Screw&Nut Adapter- The detachable 1/4" to 3/8" screw socket at the bottom, which can be converted by yourself, allow the U shape flash bracket to attach to a tripod or light stand. Note: Received the flash bracket with the convert screw. Release the screw to get 1/4” thread or 3/8” thread..
Metal construction with black anodized for higher durability..
Non-slip rubbers on the inner side provides strength and stability. Maximum opening diameter: 2.16". Ideal for clamping items 0.6"-1.73" in diameter..
(Upgraded Version) UYODM 2Pack Solar Panel for Nest Camera (Battery),Keep Your Nest Camera INOUTCAMW 1080p Indoor/Outdoor Working- Silver
✔ DESINGN FOR Nest Cam: The solar panel has a built-in 2200mAh battery, which can be better Compatible with Nest INOUTCAMW 1080p Indoor/Outdoor Camera (Battery) , keep your Nest Cam continuous working, No more battery changing, no more power adapter needed.Not compatible with Nest wire Cam..
✔ WATERPROOF AND DURABLE: The solar panels are made of monocrystalline silicon and Anti-rust aluminum alloy, durable and long-lasting.Smooth enough to drain the rain and water drop. The magnetic charging head is just the same size as the charging port to prevent rainwater from entering.work temperature: 32°F to 122°F (0°C to 50°C)..
✔ 11.5FT LONG CABLE: If your camera and solar panel do not have an ideal installation location, a long enough cable will give you a lot of leeway. No need to worry the limit of distance..
✔ 360° ADJUSTABLE MOUNT: Aluminum alloy solid ball rotation design supports 360 degree adjustment.allowing you to perfectly position your solar panel to maximize sunlight exposure..
✔ PACKAGE LIST: 2 x Solar panel( 11.5ft/3.5m cable) + 2 x 360° secure mount bracket +6 x Installation screws + 6 x wall anchors..
