3 Sets 3/4 Inch Brass Garden Hose Repair Kit Mender End Water Hose End Mender Female and Male Hose Connector with 6 Pieces Stainless Steel Clamp
Size details: the diameter of brass garden hose mender is approx. 17 mm/ 0.67 inches, can easy to connect the 3/4 inch hose for easily insert and remove hoses, please check your hose size before buy it.
Sturdy material: these hose connectors are made of solid brass, which is rustproof, corrosion resistance and durable, and the stainless steel hoop clamp can avoid garden hose leakage.
Easy to use: replacing the end of the garden hose is quick and easy, no additional tools are required, just by hand, suitable for using with garden hose, pipe tubing, and water equipment system, hose repair mender, etc..
Wide applications: you can use them to repair or replace broken female or male hose connector, connect to male or female quick connector to lengthen the hose, use with water faucet, etc..
Package including: you will get 3 sets 3/4 inch brass garden hose mender and 6 pieces stainless steel clamp, enough for your daily use or replacement, nice combination for your convenience.
...40 pcs hose clamps with 7 size range, enough for your spare and replacement in daily life around you house, garage, lawn and garden.
DURABLE 304 STAINLESS STEEL –The hose clips are made of high quality and premium heavy duty 304 stainless steel material that are more salt resistant, anti-rust, anti-corrosion, water proof, oil proof than other 201 stainless steel. Solid and sturdy material ensure the adjustable hose clamps last a long time for use.
NICE ASSORTMENT SIZES – The stainless clamps include 7 different diameters steel hose clamps to adapt to different hoses: 6-12mm, 10-16mm, 13-19mm, 16-25mm, 19-29mm, 18-32mm, 21-38mm. The Clamp kit are flexible and ductile with wide adjustable size range from 6 to 38mm/0.24-1.5 inches.
EASY TO INSTALLL AND REUSABLE – The hose clamp designed with a worm gear mechanism to adjust the clamp’s diameter to precisely apply sealing pressure. It attaches hoses for fitting hoses in confined spaces to prevent flow leakage. These clamps also can be recycled and reused due to the 304 stainless steel material which makes them worked last for long.
WIDELY USED – The pipe tube clamps are used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, boat/marine, shield, el....
ATPEAM Hose Clamp Pliers Set | 3Pcs Flexible Heavy Duty Hose Removal Tool Hose Pliers Automotive Hose Clamp Tool Used in Any Position | Works on 18mm-54mm Hose Clamps
Function: Precision clamps at the ends of flexible cables allow extensions where other models hose clamp pliers are not accessible, while heavy duty 24-inch flexible cables allow for use in any position. The hose pliers also have a locking mechanism that holds the clamp in the open position for easy removal and installation of the clamp..
Premium Quality: The hose clamp pliers are made of high quality material with extra sturdy carbon steel cable prevents twisting and breaking, the hose clamp removal hook set also has durable chromoly vanadium construction..
Two Hook Pliers Added: Two hook designs of the hose pliers automotive to fit between various fittings and hoses. Easy to penetrate hardened coolant, oil or any other parts where hose attached . Real-time removal of radiator hoses, transmission lines, heater conduit pipes or any other rubber pipes with fitted joints..
Wide Application: The hose clamp tool allows for removal of plastic and/or metal self-tightening hose clamps with diameters of 11/16-inch - 2-1/2-inch (18mm - 54mm).
SANIFANNY Liquid Hand Sanitizer Dispenser - Easy-Access Lid for Convenient Application - Portable Design with Belt Clip and Lanyard Hook - Medical-Grade Rubber Made in Canada Parent Pink
DIY Hose Clamp: You can trim the stainless strap at any length you want easily to adapt to different hoses, which can be used for pipe repairing in....
Large Hose Clamp: The hose clamp kit comes with a 7.87 feet long × 0.5inch wide metal strap and 6 fasteners in total. It’s a simple matter to make....
Durable Stainless Steel: The hose clips are made of high quality 304 stainless steel material that are corrosion-resistant, water-proof, rust-proof.....
Powerful Function: The worm drive clamp is torsion-resistant, pressure-resistant, tightly locked, helps to solve the problem of liquid gas leakage.....
Easy to Use: You just need to attach the fastener into the pipe strap like picture 5, and then loosen or tighten the screw of the hose clip with a....
AKIHISA 4 Pack 26-28mm ID Range T-Bolt Hose Clamps 304 Stainless Steel Heavy Duty Adjustable Tube Clamp1 to 1.1 Inch
[Clamps Size] T bolt clamp adjustable work range 1.02-1.1" (26mm to 28mm).
the screw bolt M6*40mm. to save you time, please carefully check and measure your hose OD to fit working range before purchasing our products..
[Premium Material] T bolt hose clamp (including the band, housing and screw) is made of high quality stainless steel-304 with fine polishing treatment, salt resistant, anti rust, anti-corrosion, waterproof, oil-proof, resistant to acid, heat and cold. Makes it more durable, wear - resistant and secure ducting tightly..
[Flanging Design] Stainless steel t-bolt clamp is designed to provide a leak-free connection, round arc flanging process of steel belt edge, it could prevent the sharp edges from cutting the pipeline, can protect your tubes better..
[Easy to Install] Removable installation, silicone hose clamps can be installed without disconnecting the pipe. High hardness and it is not easy to deform, stainless steel screws, large torque..
[Wide Applications] high pressure hose clamp can be used in a wide variety applications of industrial, automotive and special equipment. Fit for fastening various oil, water, gas hose and various hose interfaces..
Marhynchus 100Pcs Hose Clamp Spring Flexible Sealing Fuel Pipe Carbon Steel Color Zinc Plating Hose clamp 6-22mm for Automobiles, Tractors Fastening Parts Hose and Cable Clamps
SAFE AND RELIABLE: These worm gear hose clamps have no edges of sharpness to cut into the hose, which will not hurt your hands or tubes.
SCOPE OF APPLICATION: This Hose Clamp is widely used in automobiles, tractors, forklifts, locomotives, ships, mining, petroleum, chemical, pharmaceutical, agricultural and other water, oil, steam, dust, etc., is a perfect connection fastener..
ADVANTAGE: Spring hose clamp is perfect for attach hoses to fittings to prevent fluid from leakage. These clamps are very tight, so you have no worry about fixing of the threads comes off.
PREMIUM MATERIAL: These Hose clamps are made of high quality carbon steel material, which is durable for a long service life.
SIMPLE TO OPERATE: Fuel hose clamp kit can be easily adjusted by a screwdriver to fit your pipes or tubes, hose clip clamps are great for indoor or outdoor operation.
5/16\ Heavy Duty Double Gripping Nylon Hose Clamps, 225° F / 200 PSI Rated, 10 Pack (Made in USA/UK)
Quality material: the entire hose clamp is made of quality 304 stainless steel, which is resistant to salt, rust, corrosion, water and oil.
Hose clamps with stainless steel material are firm and reliable, no need to worry about rusting and cracking when installed on pipes.
10 Range sizes for options: these hose clamps are flexible and expandable with adjustable widths to fit 20 cm/ 7.87 inches hoses.
They include 10 steel hose clamps in different diameters to accommodate more hoses, and the fixture kit is flexible and easily extensible, with adjustable sizes ranging from 9 to 273 mm/ 0.35 to 10.75 inches.
Easy to install: the hose clamp is designed with a worm gear construction that adjusts its diameter to apply good sealing pressure.
It connects the hose so that the hose can be installed in a narrow space to prevent leakage.
These fixtures can also be applied for many times due to the 304 stainless steel material.
Wide application: the hose clamp could be firmly locked and applied to fasten hoses, pipes, cables, pipes, fuel lines, etc..
Suitable for many fields, like automotive, industrial, marine, shield, electronic or home applications.
Package includes: the hose clip kit comes with a total of 28 hose clips in a range of 10 sizes from 9 to 273 mm/ 0.3....
Swpeet 121Pcs 7-22mm Spring Band Hose Clamps with Swivel Flat Band Fuel Hose Clamp Plier Assortment Kit Silicone Vacuum Hose Action Pipe Clamp Low Pressure Air Clip Clamp for Hose Clamps
...nd. Better for small tubing than worm screw type unless high pressure. Get the chart to convert the numerical mm's size to fractional for hose- tube suggested size clamp..
Wide Applications ----------- Spring hose clamps are used in a wide range of applications, suitable for fuel lines/vacuum hoses/gas pipe/air hose/water pipe/silicone hose, great choose for garage, boats, motorcycles, lawn and car engines connection, etc..
