RV Winterize Blowout Adapter, Blowout Adapter for Winterizing with 1/4 Inch Quick Connecting Plug and 3/4 Inch Garden Water Hose Threading, RV Winterizing Kit with Ball Valve for RV Boat Camper
...Longest Length (not including fittings) x 15.25” x 22.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
classAcustoms 12 VOLT Fresh Water Pump MODEL # 12V3 - FRESH WATER USE ONLY - OPEN FLOW 11.6....
Boao 20 Pack 16mm Drip Irrigation Folding Hose Connectors End Plug,1/2 Drip Tubing Figure 8 End Fitting
Large quantity: package includes 20 packs of hose connectors stop end cap plugs to meet your needs.
Good quality: they are made of sturdy tubing plastic, durable to ensure years of usage.
Fit size: these 16 mm barbed fittings work with half inch drip tubing, whose inside diameter is from 0.560 to 0.600.
Compatible with many types of tubing as well as 1/2 inch blank tubing or drip lines.
Quick and simple to install: these hose connectors are easy to mount without any additional tools, which is a convenient solution for both indoor and outdoor garden utilize, and provide effective, long-lasting and watertight connections for your hose system.
Applications: plug the end of your poly tubing or drip line with these drip irrigation end caps.
SharkBite U3523LFA Stop Valve Connector Plumbing Fitting, Compression Push-to-Connect PEX, Copper, CPVC, 1/4 inch (3/8 inch OD) x 3/8 inch
INSTALLS IN SECONDS: 1/2 inch push-fit x 3/8 inch threaded compression angle shut off valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal.
PERFORMANCE: Rated to 200 PSI and 200 Degree F. Use in Potable water and Hydronic Heating applications.
VERSATILTY: SharkBite connects Copper, PEX, CPVC, and PE-RT Pipe in any combination.
QUALITY: Only SharkBite's quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.
Habitech 2-Pack In-Line Barbed Ball Valve 13mm For 1/2 Inch Tubing .520 ID - Regulate and Shut-Off/On Water Flow
...lves or in any situation where fluid restriction is needed. For use with irrigation, aquarium plumbing, pump return line, saltwater applications, RV camper and trailers, pex tubing, hydroponics, and aquaponics..
Leak-Free Seal: These non-corrosive plastic flow valve fittings are guaranteed to provided a secure, watertight connection that handles an operating pressure of up to 45 PSI. Constructed to be wear-resistant to assure long term reliability of connections. Confidently install these barbed fittings without clamps by using our Valve Sizing Chart (see photo) to get the perfect fit. Match the ID (Inner Diameter) of your hose or tube with the acceptable IDs listed on the chart..
SharkBite 1/2 Inch x 3/4 Inch MHT Washing Machine Angle Valve, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, 25560LF
INSTALLS IN SECONDS: Washing Machine Angle Valve requires no special tools, no soldering, no crimping, unions or glue. Just push to create a watertight seal.
PERFORMANCE: Rated to 200 PSI and 200 Degrees F. Use in potable water and hydronic heating applications.
VERSATILTY: SharkBite connects Copper, PEX, CPVC, and PE-RT Pipe in any combination.
QUALITY: Only SharkBite's quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.
ISPINNER 15pcs 1/2 Inch Stainless Steel PEX Cinch Clamps, Crimp Rings Pinch Clamps for PEX Tubing Pipe Fitting Connections, Pack of 15
HIGH QUALITY MATERIAL - Made of 304 Stainless Steel, has good corrosion resistance, heat resistance, low temperature strength and mechanical properties..
360-Degree SEAL PROTECTION - These interlocking rings form a complete 360- Degree watertight seal, provide reliable and fast connection of all PEX pipes fittings..
WIDE APPLICATION - Widely used in all plumbing system, such as water heater, air condition system, pipeline system, hydronic heating system, electrical plumbing etc..
EASY INSTALLATION - Slip these pex clamps over the tubing, then slip tubing onto insert fitting. Use the correct cinch tools to close the clamp ear until it is fully engaged. Providing a strong, leak-free and reliable crimp fitting connection..
SIZE - 1/2 inch PEX clamps, fit for 15.0-17.5mm outside diameter pipe. Width x Thickness of 1/2 inch clamp is 7.0 x 0.8mm..
SharkBite 22187-0000LFA Ball Valve 1 Inch x 1 Inch, Water Valve Shut Off, Female, FNPT, Push-to-Connect, PEX, Copper, CPVC, PE-RT
INSTALLS IN SECONDS: 1 inch ball water valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal.
PERFORMANCE: 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating Applications..
COPPER, PEX, CPVC, PE-RT: SharkBite Ball Valve plumbing fittings fit Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination.
QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
RESIDENTIAL and COMMERCIAL: All SharkBite PEX pipe tubing meets the same standards for commercial and residential plumbing applications.
INSTALLS IN SECONDS: Shark Bite Faucet Installation Kit requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal.
PERFORMANCE: Rated to 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating applications.
COPPER, PEX, CPVC, PE-RT: Shark Bite hose connector inlet fits Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination.
QUALITY: Only Shark Bite’s quality and performance is field-proven with more than 550 million connections. Shark Bite is the only push-to-connect brand that can ensure a clean, leak-free connection.
RESIDENTIAL and COMMERCIAL: All Shark Bite fittings meet the same standards for commercial and residential plumbing applications.
SharkBite 1/2 x 3/4 Inch MHT 90 Degree Hose Bibb, Multi Turn, Push To Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, 24626LF
INSTALLS IN SECONDS: 1/4 inch x 3/8 inch Stop Valve Tee Adapter requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal.
PERFORMANCE: Rated to 200 PSI and 200 Degrees F. Use in potable water and hydronic heating applications.
VERSATILTY: SharkBite connects Copper, PEX, CPVC, and PE-RT Pipe in any combination.
QUALITY: Only SharkBite's quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.