UGREEN 5 Bay USB-C to SATA HDD SSD RAID Enclosure, Tool-Free Silent Direct Attached Storage (DAS), 2.5" 3.5" RAID External Hard Drive Enclosure Support 8 Raid Mode and Max 80TB Capacity
5 Bay RAID Enclosure: The RAID enclosure is suitable for various 3.5"/2.5" SATA HDD SSD. Supports 5 16TB hard drives, with a total storage capacity of 80TB. Multi-RAID modes of this direct attached storage for a diversity of needs, including RAID 0/1/3/5/10/JBOD(SPAN)/CLONE/PM RAID modes. (Hard drives are not included in SSD RAID enclosure).
Safe and Easy Storage: HDD RAID enclosure uses dual chips with built-in short-circuit, over-current, and multi-protection ensuring the safety of your hard drives and valuable data. Since the data is stored in a local, easy-to-manage 5-bay hard drive enclosure, cloud service costs and data loss due to online server shutdowns are a thing of the past..
Fast & Stable Transmission: Equipped with USB3.1 Gen1, this USB RAID Enclosure transfers files at speeds up to 5Gbps by accelerating with UASP, and the read/write speeds capable of reaching 230MB/s (Tested in RAID 5), which is faster enough to transfer 1GB files in 5 seconds. Thunderbolt 3 Compatible..
Tools-Free Installation: Easy disk installation and removal. Plug and play, no drivers needed. This 5-bay enclosure has 2 built....
Focusing on Laser Engraving and Decorating: Affordable, Versatile, and Creative Marking, Engraving, and Cutting
Sleek Modern and Efficient look design – Excellent structural design ensures air tightness, protects your safety & health away from smog, noise, dust and pungent odor anytime and anywhere, maintains clean indoor air..
Flame Retardant and Smoke-Proof – xTool Enclosure has careful material selection.Outer PU cross-grain layer is waterproof for wiping and cleaning. And the inner 600D flame retardant polyester fabric layer is fireproof and has a strong smoke barrier..
Sturdy Construction – The honeycomb board material layer is chosen for the middle layer of the housing material and supplemented by 1 Polyester edge ensures high hardness for xTool Enclosure..
Foldable & 1 Minute Set Up & All in One Design- Smart elegant shaped design, xTool Enclosure using the principle of airflow to greatly improve the exhaust efficiency to 200%. Storage design on the side of the enclosure greatly improves the space utilization..
Ultra Eye Protection – Above the enclosure is a 17.91”x9.84” (455x250mm) viewing window made of laser light filtering PC. You can observe the laser engraving and cutting process more safely. Suitable for most Laser Engravers on the Market – Product size Up to 24.6”x 24”x 12.2” (Inner size: 23.6”x 23.2” x 11.8”) ,xTool E....
Everything But Stromboli SSD Enclosure Case for SATA 2.5 Hard Drive/Solid State Drive USB 3.0 Cable Tool Free Type Works with Samsung PNY Kingston SanDisk 9.5mm x 2.5 Inch HDDs or SSDs
This single unit 2.5 Inch Hard Drive Enclosure is perfect for your business, IT Department, home computer, or gaming set-up. Box Includes (1)....
Easy, Tool Free installation – simply open case and insert 2.5 Inch SATA HDD or SDD. This product is designed for standard size disk of max 9.5mm....
SATA III Enclosure for SSD or HDD: Enclosure is optimized for Sata III, backward compatible with Sata I and Sata II.
USB 3.0 Enclosure for SSD: 3.0 USB Speed Cable to connect your SSD/HDD from your SATA Enclosure to your USB port on laptop, desktop, Windows, Mac,....
Enclosure for Samsung SSD, Kingston SSD, PNY SSD, SanDisk SSD - Works with/Compatible with Samsung SSD 860 EVO 2.5 Inch SATA III Internal (250GB,....
ACASIS 40Gbps NVMe Enclosure, M.2 Enclosure Compatible with USB 4/3.2/3.1/3.0/2.0, SSD Enclosure Support Up to 8TB Size 2280 M&B+M-Key, Aluminum Alloy External NVMe Enclosure USB C Enclosure
【UPGRADED TBU401 TOOL-free & Plug and Play】No screw or screwdriver is required. This m.2 enclosure is lightweight, luxury and compact. You could easily pull the back-shell off or put it back with your hand. It ONLY supports M KEY and B&M KEY SSD with size 2280..
【IMPROVED Heat Dissipation】With aluminum alloy material and waved hollowing outer casing, this SSD enclosure has a great heat dissipation, long-lasting performance. Additionally, this nvme enclosure coms with a thermal pad for better heat dissipation..
【Smooth top and bottom surfaces】This ACASIS 40Gbps m.2 nvme ssd enclosure features wtih smooth top and bottom surfaces, which will appropriately prevent scratching the surface contacted, provide you a nice experience..
【Compact and Portable】The product dimension is 3.9*2.4*0.56inch and weights 0.37lb, which is convenient for travel use..
【Superior Speed M.2 Enclosure】Our ACASIS 40Gbps nvme enclosure is fully compatible with USB4.0 and downward compatible with USB3.2/3.1/3.0/2.0. The enclosure speed test for the Samsung 980 PRO 250GB is 2805mb/s for....
SainSmart Large 3D Printer Enclosure, 20.9'' x 24.2\ x 28.9\
Consistent Temperature: The SainSmart 3D Printer Enclosure reduces heat losses and prevents external factors that might alter your prints, keeping the printing area at a consistent temperature, delivering stable and smooth printing results..
Noise & Dust Reduction: A enclosure helps to reduce the annoying fan noise while printing, making it more viable for home and school use. It also protects your printers from dust..
Safe to Use: The lining of enclosure uses pure aluminum film material, equipped with stainless steel supports, stable structure and a large space. Folding storage, easy to install and carry..
Better organize your printing area: the enclosure is equipped with multiple tool pockets and holders on each side, keeping your printing area clean and tidy..
With a large area measuring 73.5cm x 61.5cm x 53cm (20.9'' x 24.2" x 28.9"), this enclosure is compatible with Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 V2 Neo, Ender-3 S1 Pro, Ender-3 Max, Ender-3 Max Neo, Ender-5 Pro, CR-6 SE, CR-10, CR-10 Smart Pro..
UGREEN 2.5 Inch Hard Drive Enclosure Integrate with 1.6FT Cable, Tool-Free SATA to USB 3.0 7mm 9.5mm External SATA SSD HDD Case with UASP, Laptop Computer Hard Disk Enclosure
Integrate with 1.6FT Cable: High-quality 1.6FT USB 3.0 cable integrated with the hard drive enclosure, so no need to worry about losing the cable when you want to back up data from dead old laptops, upgrade HDD to SSD for additional storage or downloading game. Lightweight & slim size plus undetachable cable make the hard disk enclosure perfect for travel. Note: SSD or HDD is NOT included.
Tool-Free Installation: This 2.5" hard drive enclosure is very easy to assemble and disassemble, just drop the drive in, snap the case back together and plug in, the external hard drive enclosure can be immediately recognized by PC, works instantly as a backup unit or additional storage device, truly plug and play..
5Gbps Super Speed: With standard SATA III and USB 3.0 connection, this HDD SSD enclosure can support up to 5Gbps transmission speed. Accelerated by UASP protocol, making the HDD SSD case 70% faster than traditional USB 3.0. UGREEN SATA enclosure can backward compatible with USB 2.0 port..
Wide Compatibility: The solid state drive enclosure is suitable for 7mm and 9.5mm 2.5 inch SATA III/ II/ I HDD SSD, compatible with Samsung Seagate WD Toshiba, etc. UGREEN laptop computer hard drive enclosures can be quickly recognized by Windows 11/ 10/ 8.1/ 8/ 7/ V....
Universal Trampoline Replacement Enclosure Poles with Clamp and Hardware
Trampoline Enclosure Pole is made of rust-resistant galvanized steel, fits for trampoline leg up to 1.5inches..
Foam wrapped poles strengthen the impact protection to prevent kids from being injured while jumping on it..
These pole caps can fit for 28 - 32mm diameter trampoline enclosure poles..
Trampoline Pole Cap can help attach net with enclosure poles and prevent Safety Net Straps from sliding down pole..
Package Includes: 6 X Upper Poles, 6 X Bottom Poles, 6 X Trampoline Pole Caps, 12 X Trampolines Enclosure Foam, 6 X Trampoline Pole Caps, 12 X Quick Release, 12 X Clamp, 12 X Spacer..
Powerwerx MBLCOVR Mobile Radio Base Station Enclosure with Power Adapter
The MBLCOVR is a radio cover enclosure that mounts to the Powerwerx SS-30DV power supply when using a AT-D578UV or DB-750X radio in a base station configuration..
This kit includes the power supply cover, short DC power supply connecting adapter cable and handle..
Our base station enclosure can accept radios smaller than 5.5" wide and 2.125" tall. The enclosure is compatible with most radios having 5.5" (140mm) mount spacing..
Enclosure Outter Dimensions (W x D x H): 5.75" W x 6.00" D x 4.40" H (6" height with handle).
