Best Weaver Scope Mount

Monstrum Precision V2 Picatinny Scope Rings | 30 mm Diameter | 0.85 inch Height

  • 0.85 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
  • 30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
  • Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
  • Uses hardened steel Torx mounting hardware to prevent stripping of the bolts.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

PRI Polymer Ring Inserts - 30mm to 1 Inch. by Unknown

  • Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
  • 30 mm diameter rings for mounting standard 30 mm rifle scope tubes30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
  • Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
  • Scope rings come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

Talley Lightweight Alloy X-Bolt 1in Low Hells Canyon Scope Rings (HC930735), Multi

  • Distinctive offset reversible design allows for added flexibility for scope placement and optimum eye relief. The rings extend forward 1.5 inch from the base and can be mounted in either direction dependent on your preferred scope placement and your mounting system..
  • Mounts to any standard Picatinny rail mounting platform | Not compatible with Weaver bases.
  • High profile in height, 0.8 inches from base of mount to bottom of rings.
  • Available in 1 inch diameter and 30 mm diameter sizes.
  • All Monstrum Tactical mount and accessory products are covered by a lifetime guarantee.
Check Stock

Monstrum 4-12x44 Rifle Scope with AO Adjustable Objective | Includes High Profile Scope Rings

  • Adjustable 4-12 times magnification, for targeting out to 600 yards and beyond.
  • An adjustable objective lens or AO - that allows for sharper focus of the target image, elimination of parallax, and range estimation.
  • Aircraft grade 6061 aluminum scope body with a sealed, nitrogen-charged tube for resistance to water and fog.
  • Precision 1/4 MOA/click windage and elevation adjustments with locking turrets.
  • Available with High Profile Picatinny/Weaver Scope Rings or with an Offset Picatinny Scope Mount.
Check Stock

Monstrum Precision Picatinny Scope Rings | 30 mm Diameter | 0.85 inch Height - Low

  • 0.85 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
  • Monstrum Tactical Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
  • 30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
  • Base is compatible with Picatinny mounting systems | Not compatible with Weaver mounts.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

Souyos Red Hunting Flashlight,350 Yard Zoomable Predator Varmint Coyote Hog Hunting Light,Red Led Light Flashlight with Scope Mount,Pressure Switch

  • RED LED FLASHLIGHT:Single mode with 350 yard tactical red led flashlight,XML-T6 LED bulb,not red filter flashlight or red lens flashlight,4 hours working time,suitable for hunting predator,varmint,coyote,fox,hog,fishing,night version,night observation,astronomy.
  • ZOOMABLE RED HUNTING FLASHLIGHT:Zoom in&zoom out status can be adjusted based on your needs for large area &long distance,the regular status is floodlight, stretching flashlight can make light became spotlight,adjustable focus help you find prey,aim and observation target clearly and security without disturbing them.
  • REMOTE PRESSURE SWITCH&SCOPE MOUNT:Momentary on pressure switch and On/Off push button switch, Push the pressure switch or press the on/off button switch to transfer on/off status,Standard 20mm Weaver Picatinny Rail Mount, Medium Profile Rifle scope rings to fit 1 inch / 25mm scope body / tube diameter.
  • POWER SOURCE:Operated by 3*AAA batteries(included) or 1*18650 battery(not included),18650 battery operates red light is brighter than 3 AAA batteries.
  • 10.FLASHLIGHT KIT:1*carrying package box,1*red light flashlight,3*AAA batteries,1*remote pressure switch,1*scope mount.1*AAA battery holder,1*18650 battery tube.
Check Stock

Aimsniper Metal Lifting Carry Handle Rails Top Mounts 20mm Picatiny Riser Rails Mount Base

  • Length: 13cm (5.1 inch). Width: 2cm (0.79 inch). Height: 1.9cm (0.78 inch)..
  • 20mm Standard Weaver Base take any scope mounts..
  • Package Include: 1 x Picatinny Rail Set, 2 x Screws, full metal scope mount base with QD Nut..
Check Stock

Low Profile Tactical Picatinny/Weaver 90 Degree Angle Mount, 1.37" Long with 3 Slots

  • Low Profile Compact 90 Degree Angle Mount, Picatinny/Weaver Rail 1.37" Long with 3 Slots.
  • Sufficient Clearance For Both Top and Side Mounting Space.
  • Only 5mm Saddle Height, Perfect to Mount Under Scope or BridgeMount Risers.
  • System Oriented Design to Build a Flexible and Compact Bridge Mount Systems when Use with Lion Gear's Bridge Mount.
  • Slim Design & Truly Lightweight, No Bulky Screws and Knobs!.
Check Stock

HIRAM Cantilever Scope Ring Mount for 1' and 30mm Rifle Scopes with 2 Slot Raised Picatinny Rail Mounts, Adjustable Cantilever Mount

  • FITS 1-INCH & 30MM SCOPES: This dual ring mount by Hiram fits pistol and rifle scopes with 30mm diameter tubes but includes gaskets to securely handle 1-inch scopes as well.
  • the cantilever design allows scopes to be placed up to 2 inches forward for better eye relief and a fuller field of view.
  • ROCK-SOLID BUILD: Our aircraft-grade 6061-T6 aluminum alloy offers superior strength and corrosion resistance while remaining a lightweight 11 ounces.
  • the heat-treated torx screws lock this mount firmly into any 20mm Picatinny or Weaver rail.
  • RINGTOP MOUNTS: The rings on this cantilever scope mount each include a 2 slot 20mm rail to easily attach additional targeting accessories like lasers, tactical flashlights, and red dots.
  • HIGHLY ADJUSTABLE: This rifle scope mount's rings can also be adjusted forward or backward to any of seven 10mm (0.4") increments to fit all your favorite rifle scopes for hunting, shooting, tactical training, and more.
  • SATISFACTION GUARANTEED: Our scope mount has been rigorously tested to ensure its effectiveness and provide the highest-quality firearm accessory on the market.
  • we back it with our usual strong warranty and friendly 24/7 customer service so you can be sure you'll enjoy its use for years to come!.
Check Stock

Burris Optics XTR Signature Rings – Self-Centering, Aluminum Tactical with Dual Steel Clamps, Mounting Accessories, Burris Rings, 1"(H), 1" , black

  • XTR SIGNATURE RINGS – These rings were designed for the tactical shooter and deliver plenty of holding power with less weight..
  • IDEAL MOUNTING ACCESSORIES – These mounting rings let you virtually sight your gun without moving the scope adjustments..
  • SIGHT MOUNT – There is no need for tapered bases or shimming for thousand-yard shooting with these mount rings..
  • TACTICAL MOUNTING RINGS – Count on the revolutionary Pos-Align Inserts technology in a tactical ring configuration for centering your scope..
  • RUGGED BURRIS RINGS – Save weight with these aluminum tactical rings that mount on any Picatinny and most Weaver style rails..
Check Stock