Gizhome 30mm / 50mm 3M Double Sided Adhesive Tape, Heavy Duty Heat Resistant High Adhesion Transparent Strong Adhesive Removable Double Sided Mounting Tap (Pack of 2 Rolls)
Double Sided Tape: 2 Pack is included. 1-1/5, 2 inch 10 feet clear heavy duty double sided tape mounts in an instant, for a long-lasting.
No Residue: Without a sticky residue when this heavy duty double sided tape removed and will not chip-off surface paint finishing.
Viscosity: Acrylic doubled side tape is waterproof, can hold 5kg stickness on board, iron, 2kgs on Marble, tile, Loading capacity depend on the weather, heat, and where you use.
High Grade of Transparency: Virtually invisible fastening helps keep surfaces smooth, with no unsightly rivet heads or weld marks.
Multiple Application: Widely using for wall mounting, glass mounting, photo mounting, home, room and office decorations, car/ cell phone repair.
J-B WELD WATERWELD: A hand mixable two part epoxy putty stick, that can cure under water and is ideal for repairing plumbing, fuel tanks, tubs and showers, drains, pool and spa, boats & potable water tanks and more! J-B Weld WaterWeld is certified by the NSF and is safe for contact with potable water..
CURE AND SET TIME: After kneading the two part formula together by hand, WaterWeld takes 25 minutes to set and cures in 1 hour. J-B Weld WaterWeld set and cure color is off white..
PRODUCT FEATURES AND STRENGTH: J-B Weld WaterWeld has lap shear strength of 1300 PSI, can withstand continuous temperatures up to 300F (149C) and intermittent temperatures of 350F (176 degrees Celsius) and is chemical resistant against petroleum, hydraulic fluids and other chemicals when fully cured..
SURFACE APPLICATIONS: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass and Plastic & PVC..
DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
additional sealing material is provided around the weld bead to provide a better seal.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
J-B Weld 8271 KwikWeld Professional Size Steel Reinforced Epoxy Twin Pack - 10 oz.
J-B Weld kwikweld pro size: Professional 5 OZ Tubes of J-B Weld KwikWeld. KwikWeld is a fast setting version of The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to multiple surfaces. Perfect for DIY.
Cure and set time: After mixing the tubes at a 1: 1 ratio, it takes 6 minutes to set and 4-6 hours to cure. Once cured, KwikWeld can be tapped, filled, sanded, molded and drilled. J-B Weld KwikWeld’s set and cure color is dark grey.
Versatile and dependable: J-B Weld KwikWeld is steel reinforced, has a tensile strength of 3127 PSI and can withstand temperatures up to 230 degrees Fahrenheit (110 degrees Celsius). When fully cured, KwikWeld is waterproof.
wattstar 15ft Butyl Tape 3/8 Inches Headlight Sealant Black Butyl Sealant Tape for Car/RV Headlights Taillights Windshields Windows and Doors,1PC
★Butyl Sealant Main Application: Butyl rubber tape is suitable for the shock-absorbing paste of windshield, door waterproof film,decorative....
★Excellent Sealing：Our Butyl rubber sealant features excellent sealing adhesion,butyl tape can be sticky to any type of metal,....
★Easy To Use: Simply release the butyl sealant from paper and press it sufficiently around the pinch weld.And after removing headlamp cover, the....
★Black Butyl Tape: Rubber Sealant is a non-drying,non-hardening synthetic rubber based butyl rubber sealant. It will remain permanently sealing and....
★Butyl Windshield Sealant Size: Butyl sealant Diameter: 7-10 mm, Length: about 4 meters. It is long enough for re-sealing about 2 or 4 headlight....
J-B Weld Company 8265-S 3 Pack Original Steel Reinforced Epoxy Twin Pack, Dark Grey
J-B WELD STEELSTIK: A hand mixable two part epoxy putty stick that is steel reinforced & non-rusting to quickly repair or rebuild anything made of metal! J-B Weld SteelStik is certified by the NSF and is safe for contact with potable water..
CURE AND SET TIME: After kneading the two part formula together by hand, SteelStik takes 5 minutes to set and cures in 1 hour. J-B Weld SteelStik set and cure color is dark grey..
PRODUCT FEATURES AND STRENGTH: J-B Weld SteelStik has lap shear strength of 900 PSI, can withstand continuous temperatures up to 350F (176C ) and intermittent temperatures of 450F (232C), and is chemical resistant against petroleum, hydraulic fluids and other chemicals when fully cured. SteelStik can be molded, shaped, sanded, drilled and tapped..
SURFACE APPLICATIONS: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass and Plastic & PVC..
DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
J-B WELD WATERWELD: A hand mixable two part epoxy putty stick, that can cure under water and is ideal for repairing plumbing, fuel tanks, tubs and showers, drains, pool and spa, boats & potable water tanks and more! J-B Weld WaterWeld is certified by the NSF and is safe for contact with potable water..
CURE AND SET TIME: After kneading the two part formula together by hand, WaterWeld takes 25 minutes to set and cures in 1 hour. J-B Weld WaterWeld set and cure color is off white..
PRODUCT FEATURES AND STRENGTH: J-B Weld WaterWeld has lap shear strength of 1300 PSI, can withstand continuous temperatures up to 300F (149C) and intermittent temperatures of 350F (176 degrees Celsius) and is chemical resistant against petroleum, hydraulic fluids and other chemicals when fully cured..
SURFACE APPLICATIONS: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass and Plastic & PVC..
DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty - 2 oz.
J-B Weld Plasticweld: A Hand Mixable Two Part Epoxy Putty Stick That Is Formulated To Repair And Rebuild Various Plastic Compounds And Surfaces. J-B Weld Plasticweld Is Designed For Diy Plastic Repairs On Abs, Pvc & Cpvc Pipes And Plastics, Auto Bumpers And More! Plasticweld Is Certified By The Nsf And Is Safe For Contact With Potable Water.
Cure And Set Time: After Kneading The Two Part Formula Together By Hand, Plasticweld Takes 25 Minutes To Set And Cures In 3 Hours. J-B Weld Plasticweld Set And Cure Color Is Off White.
Product Features And Strength: J-B Weld Plasticweld Has Lap Shear Strength Of 600 Psi. Plasticweld Can Withstand Continuous Temperatures Up To 250Of (121Oc) And Intermittent Temperatures Up To 300Of (148Oc) When Fully Cured. Plasticweld Does Not Shrink And Can Be Molded, Shaped, Sanded, Drilled And Cut.
Applications: Abs, Pvc & Cpvc Pipes And Plastics, Auto Bumpers And Trim, Vinyl Surfaces And Siding, Marine Repairs & Fiberglass Parts, Plastic Water Tanks, And Plumbing.
Repair and rebuild any rigid and semi-flexible plastic including ABS, PVC and CPVC.
HITBOX 200A ARC Welder Alkaline Electrode Weldable, 110V 220V 2 IN 1 Lift TIG/MMA VRD Continuous Welding Machine Fits Below 1/8' 4.0 mm Welding Rods,Hot Start Welder for Outdoor Home Industry Use
Unique arc welder with lift function-Usually, arc welders can only weld carbon steel, alloy steel, mild steel, and zinc plated pipes. With lift tig capability, our MMA-200 can weld these materials as well as stainless steel. Most electric welders display a current of 200 A, but the actual current may be only about 100 to 140 A. The current of this product can reach up to 200A, and it can handle alkaline welding rods! !!.
Weld more types of rods-As you know, it is difficult to weld 7018 and cellulose rods with an arc welder with low no-load voltage. To meet the needs of our customers who weld these rods, we increase the no-load voltage of this welder to 78V. Now you can weld other common rods such as 7018 cellulose rods and 6013J422. You can weld 2.5mm 3.2mm rods for a long time, drag solder or weld 1/8" 4.0mm rods for 1-2 hours.
110V 220V Dual Voltage Arc Welder-This welding machine is 110V 220V and comes with a 35-50mm² quick connector, which can withstand higher current than other connectors. This feature allows the welder to work longer.Because of the high current, extending the weld cable to 50 meters does not attenuate the current..
60% duty cycle, longevity-The rated duty cycle of HITBOX MMA200 is 85% for arc welding and 50% for TIG welding. Auto....
