2 Pieces 3 Heavy Duty Weldable Hinges 12 Ga Welding Long Lasting Steel Butt Hinge Corrosion and Rust Resistant Metal Weld on Hinges for Trailer Door Heavy Gates
What You Will Get: you will receive 2 pieces of weldable hinges, the size of them is about 3 x 3 inches, and the thickness is about 12 Ga, the weight is about 0.34 lb, besides, each hinge can bear about 25 lb of weight, you can choose them according to your needs.
Strong and Reliable: this weldable metal hinge is made of steel, strong and reliable, and it is with nice bearing capacity, suitable for heavy gates and doors, it is not easy to break, you can use the hinge for a long time.
Easy to Install: these heavy duty gate hinges do not need to be fixed with screws or other fasteners, only need to be welded at the place you want.
These heavy duty gate hinges are dark gray and don't have coating, they can be painted to match the metal surface to which they are attached.
Using Method: you can weld the metal gate hinges directly to the door, or you can drill holes and screw them on the doors (screw is not included), you can choose the installation method according to your needs.
Applicable Occasion: you can take these weld on steel hinges for home door use, and they are also suitable for yard gate, trailer and other occasions, strong and safe to use.
1997-2004 Dakota Steel rollpan with Plate Box & light roll pan
【Fitment】HECASA rear roll pan, will be compatible with 1999-2007 Chevy & GMC Silverado 1500 Sierra 1500 Pickup Trucks..
【High quality】Superior steel material, with more efficiency and durability. Heavy black powder coating for rust protection..
【Practical accessory】With the installation of this rear roll pan, it will not only smooth out the rear bumper, cover protrusions but also give the vehicle a sleeker appearance. Package includes roll pan, license plate provision, light kit..
【Installation】: Weld-On installation, minor body work and painting needed. Instruction and hardware is NOT included, please refer to the videos on the internet or take it down to a shop and have the work done by a professional..
J-B Weld 50133 Plastic Bonder Structural Adhesive Syringe - Tan - 25 ml
J-B WELD PLASTICBONDER (Tan): A quick setting and multipurpose two part urethane adhesive & gap filling system that provides a strong and lasting bond....
CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, PlasticBonder takes 15 minutes to set and 30 hours....
STRENGTH: J-B Weld PlasticBonder has tensile strength of 3770 PSI..
Spot Weld Cutter Set,13 Pcs 3/8" Rotary Spot Weld Cutter Remover Drill Bits Tool and 2 Replacement Blades,Metal Hole Cutter Remover for Power Drill Spot Welding
[Suitable]: Sharp double-sided blade, which is more effective in separating spot welded panels than panel cutting machines. The spot-welded panel or metal plate can be perfectly removed without deforming the metal or damaging the underlying panel. Suitable for stainless steel, iron, aluminum, F.R.P, or other metal sheets.
[Material]: The preferred material is high-quality steel, which has excellent heat resistance, high hardness, and wear resistance. The blade diameter is 3/8 inch, and the handle size is standard 1/4 inch..
[Easy to separate] The spot welding cutter drill can easily separate the spot welding plate without distorting the metal plate. The spot-welded panel or metal plate can be perfectly removed without deforming the metal or damaging the underlying panel..
[Package includes]: 1 drill bit with cutter, 2 guide pins., 10 x additional 3/8 "cutters. Also known as: spot weld drill bit, spot weld bit, spot weld cutter drill bit, spot weld drill cutter, spotweld drill bits, spot weld cutter, Rotary Spot Weld Cutter Sets Double Sided, Power Drill Spot Welding.
J-B Weld Tabletop Epoxy Resin, 1 Gallon Kit, Cures Clear, Fast Cure Time, Minimal Bubbling, Scratch & Water Resistant
J-B WELD CLEARTOP: is a 1:1 mix ratio, crystal clear pour-on epoxy that provides a protective surface for all your projects. J-B Weld ClearTop is a self-leveling, high viscosity and solvent-free formula allowing for a safe, smooth and even finish on your project. J-B Weld ClearTop resist scratching, contact heat (up to 150oF) and impact! ClearTop can be mixed with dyes to add coloring to the Epoxy and be sanded after fully cured. The half gallon bottles have graduated marking on them to help make sure you measure even amount of Part A & B..
DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
J-B Weld KwikWeld, 6 Minute Set Epoxy, Steel Reinforced Epoxy, High Strength - 2 Pack, Dark Grey (8276-2)
J-B Weld Kwikweld: A Fast Setting Version Of The Original Cold Weld Two-Part Epoxy System That Provides Strong, Lasting Repairs To Multiple Surfaces. Perfect For Diy Household, Automotive, Marine, Craft Repair And Much More.
Cure And Set Time: After Mixing The Tubes At A 1: 1 Ratio, It Takes 6 Minutes To Set And 4-6 Hours To Cure. Once Cured, Kwikweld Can Be Tapped, Filled, Sanded, Molded And Drilled. Kwikweld’s Set And Cure Color Is Dark Grey..
Versatile And Dependable: J-B Weld Kwikweld Is Steel Reinforced, Has A Tensile Strength Of 3127 PSI And Can Withstand Temperatures Up To 230 Degrees Fahrenheit (110 Degrees Celsius). When Fully Cured, Kwikweld Is Waterproof And Resistant To Petroleum, Chemical And Acid..
Surface Applications: Metal, Plastic & Pvc, Wood, Concrete, Ceramic & Tile, Fiberglass And More.
DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
J-B Weld 50112 ClearWeld 5 Minute Set Epoxy Syringe - Clear - 25 ml
J-B Weld Clearweld: A Clear, Quick Setting And Multipurpose Two Part Epoxy That Provides A Strong And Lasting Bond On Surfaces Including Metal, Tile, Most Plastics, Ceramic, Glass, Wood And More. J-B Weld Clearweld Comes In A Syringe Allowing For An Easy 1:1 Mix Ratio. The Unique Syringe Has A Re-Sealable Cap That Prevents Drying Out And Leaking, Allowing For Multiple Uses.
Cure And Set Time: After Mixing The Two Part Formula With The Included Mixing Tray And Stir Stick, Clearweld Takes 5 Minutes To Set And 1 Hour To Cure. J-B Weld Clearweld Set And Cure Color Is Clear.
Strength: J-B Weld Clearweld Has Tensile Strength Of 3900 Psi.
Surface Applications: Metal, Most Plastics, Pvc, Wood, Concrete, Ceramic & Tile, Fiberglass And Glass.