Your purchase includes One Hobart – 500553 Handler 210 MVP MIG Welder, One 10 ft. (3m) H100S4-10 gun, One 10 ft. (3m) work cable with clamp, Built-in gas solenoid value and dual-gauge regulator with gas hose.
Welder Dimensions: 10.62” W x 19.5” L x 12.37” H | Welder weight: 79 lbs. | Input Voltage: 110/115/120 V – 220/230/240 V | Material Thickness: 1/4” – 3/8”.
Sized for you to easily transport the unit to the jobsite with the power to weld 3/8 in. mild steel.
Keeps wire electrically “cold” until trigger is pulled which gives you ease of use and keeps you safe.
Allows you to fine control the output parameters for improved arc performance with less spatter for a better bead appearance and less clean up..
[UP HIGH OR DOWN LOW] It’s really 2-tools-in-1: A pole saw for trimming branches from trees, and a regular chainsaw for projects on the ground.
[POWERFUL MOTOR] At 8 Amps, you’ll get consistent performance and reliability from this streamlined machine. Rated Voltage: 120V~60Hz.
[AUTO CHAIN LUBRICATION] The automatic oiler will always have the chain operating at peak efficiency, for faster, more controlled cuts.
[COMPACT & LIGHTWEIGHT] At only 10 lbs., this saw is designed to be held up high and to be maneuverable once it gets up there.
[DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last.
[AUTO CHAIN TENSION] This system prevents over-tightening, keeps the chain running smoothly around the bar, and places less stress on the motor.
[TOOL-LESS INSTALLATION] The pole attaches quickly and offers up to 10 feet of reach, so you don’t have to stand on a ladder to trim branches.
J-B WELD ORIGINAL PRO SIZE: Professional 5 OZ Tubes of the Original Cold Weld two-part epoxy system that was designed as an alternative to torch....
CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured J-B Weld Original can be....
VERSATILE AND DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees....
Ridged Slats Slat Depot Single Wall Bottom Locking Privacy Slat for 3', 4', 5', 6', 7' and 8' Chain Link Fence (4ft, Black)
Black Ridged Slats for 4ft chain link are deliberately cut to about 44.5 inches long. These fence inserts are designed primarily for 4ft 11 or 9 gauge chain link with a two inch diamond. Also works in economy chain link with a larger diamond pattern, but privacy will be less. Slats must be installed correctly and be fully inserted inside the wire mesh of your fence to achieve the desired results. Cannot be used to extend the fence height. Not suitable for fences on a steep slope..
Amount of privacy achieved is determined by diamond size of existing chain link fence. Each slat measures 1.25" wide. Ridged Slats will provide about 85 percent blockage in chain link with a 2" diamond. Slats installed in chain link mesh with a 2-1/4" diamond will achieve about 80% coverage. Slats used in economy chain link fabric with a 2-3/8" diamond will produce about 75% privacy. Diamond size is determined by measuring diagonally between the parallel wires - NOT corner to corner..
Each box contains 82 “W” shaped slats and three 42-inch pieces of Viper Channel - enough to cover 10 linear feet of chain link with a 2" diamond pattern. Chain link with a larger diamond mesh pattern will use fewer slats but ALL the track provided in each box. 2-1/4" chain link will use abou....
J-B Weld Plastic Bonder Black 25ml Syringe - 2 Pack (50139-2), 25 ml - 2 Pack
J-B Weld Plasticbonder (Black): A Quick Setting And Multipurpose Two Part Urethane Adhesive & Gap Filling System That Provides A Strong And Lasting Bond To Many Plastic Surfaces J-B Weld Plasticbonder Is Great For Diy Plastic Repairs, Filling Dents, Bumper Repairs And More. J-B Weld Plasticbonder comes in Syringe allowing for a 1: 1 Mix Ratio. The Unique Syringe Has A Re-Sealable Cap That Prevents Drying Out And Leaking, Allowing For Multiple Uses.
Cure And Set Time: After Mixing The Two Part Formula With The Included Mixing Tray And Stir Stick, Plasticbonder Takes 15 Minutes To Set And 30 Hours To Cure J-B Weld Plasticbonder Set And Cure Color Is Black..
Strength: J-B Weld Plasticbonder Has Tensile Strength Of 3770 PSI..
DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, ....
PC Products PC-7 Epoxy Adhesive Paste, Two-Part Heavy Duty, 2oz in Two Jars, Charcoal Gray 27776
J-B WELD MINUTEWELD: A stronger and more permanent substitute to Super Glue J-B Weld MinuteWeld is an instant setting two part epoxy that will set in 1 minute under most temperature conditions J-B Weld MinuteWeld comes in a syringe allowing for an easy 1: 1 mix ratio The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses.
CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, MinuteWeld takes 1 minute to set and 1 hour to cure J-B Weld MinuteWeld set and cure color is clear.
STRENGTH: J-B Weld MinuteWeld has tensile strength of 2300 PSI.
DO IT YOURSELF: Big or small, you can DIY it with J-B Weld Our heavy duty epoxy and adhesives repair & restore it right the first time J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
LIFT MORE: Adds Pinch Weld application to all Unijacks and All-in-One Jacks. Now lift right on the pinch weld point with these jacks without worry of damaging or bending the pinch welds in the frame..
EASY: Simply slide the pinch weld adapter onto the existing saddle riser of the All-in-One or Unijacks..
UNIVERSAL FIT: The Pinch Weld Adapter fits all Unijacks and All-in-One Jacks on the market. 640912, 620470 & 620471..
SAFER: The Pinch Weld adapter not only protects the frame of the vehicle from damage, but also also for more secure contact with the vehicle and will the wide platform straddling both sides of the pinch weld your vehicle will be more stable during lifting..
Weld on Filler Cap, KIMISS Aluminum Alloy Weld On Oil Tank Filler Neck with Cap Filler Neck 1.5'' 1 1/2'' OD for Fuel Tanks Weld In Fuel Cell Cap Weld On Fuel Cap Fuel Filler Neck Aluminum Fill Cap
Scope of application: Weld On Billet Caps Aluminium Weld on Filler Neck does not need to be replaced frequently, with strong practical and durable. The filled neck with cover is suitable for oil tank, fuel tank, water tank, dry tank, etc. It is a high-quality, quality-guaranteed auto parts, and Fuel Filler Neck And Cap is your best purchase choice..
Product function: Weld On Fill Cap Fuel Filler Neck has smooth finished design, come with a O-shaped sealing ring and a natural aluminium screw on cap. Weld on Cap meets aviation hose fitting requirements, precision m....