Best Weld on Bullet Hinges

Waterson Heavy Duty Commercial Fully Adjustable Mortise Self-Closing Gate Hinges 2-Pack – K51MP-450 (SA.SA1)-Black

  • HIGH STRENGTH - The gate hinge is made of high quality steel so that each pair of the hinge can hold up to 400lbs driveways and security gates!.
  • RUST RESISTANT - The black powder coating makes the hinge has a superior rust resistance performance!.
  • EASY TO INSTALL - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall.Minimum distance between post and gate should be 1.5", to accommodate for the welding plate and barrel. The threaded arm allows you to easily adjust the distance between gate and post!.
  • LONG LIFE TIME - Hinge pivots on a steel ball bearing and includes a grease fitting to keep the bearing lubricated. It'll last a long life time in good maintenance!.
  • EXCELLENT SERVICE - Backed by a 12 month Warranty and 7*24 hours Technical Support!.
Check Stock

J-B Weld 8265S Original Cold-Weld Steel Reinforced Epoxy - 2 oz.

  • J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel. Perfect for DIY household, automotive, marine, craft repair and much more..
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey..
  • VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid..
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
  • Will set in 4-6 hours, and cure in 16-24 hours.
  • Waterproof, petroleum, chemical, and acid resistant when fully cured.
Check Stock

Eagle 24 Gallon Flammable Liquid Safety Cabinet, 3 Shelves, Self-Closing Door, Yellow, 2310X

  • Flammable storage cabinets have reinforced 18-gauge steel double wall internal and external welded construction with 1-1/2 in air space on sides, top, bottom, back, and doors. Four adjustable galvanized leveling legs and ground connection keep this cabinet in place.
  • The patented safety shelving has adjustable galvanized steel shelves that direct spills to the back and bottom of the leakproof sump and hold 350 lbs. UDL and has 3 in centers for shelf brackets.
  • Fire resistant cabinet has a lead-free, high-gloss, baked-on powder finish with trilingual warning labels, a 2 in. raised leakproof door sill, and two 2 in. internal vents with fire baffles and caps.
  • Our cabinets have fail-safe doors and are available in manual close (180° opening) or self-closing doors (135° opening) that are self-latching with three-point stainless steel bullet latching system, piano hinges, and a flush-mounted door handle with key lock.
  • Cabinets meets FM-Approved NFPA Code 30 and OSHA compliance requirements.
Check Stock

Gonex Neoprene Chest Hunting Waders with 600G/800G Insulated Boots 100% Waterproof Fishing Waders for Men Duck Hunting

  • 100% Waterproof: Gonex neoprene chest waders with boots are made of 100% waterproof 4.5 mm neoprene material. With a three-layer fabric that combines neoprene inner layer and exterior jersey shell with a waterproof/breathable membrane layer in between, chest waders' seams are glued, stitched and taped for solid and durability..
  • Solid & Insulated Rubber Boots: Gonex neoprene chest waders’ boots are built-in 800 Gram 3M Thinsulate ultra insulation. It can keep your feet warm in cold weather. Meanwhile, the vamp is strengthen to reduce the possibility of being pierced. The design of the sole pattern can provide you with better grip and reduce slipping..
  • Durable & Sturdy:Ours waders feature with armor weld double-stitched and sealed seams, polyurethane-coated leggings, all these give extra protection and make sure there is no leak..
  • Humanized design: Comfortable padded shoulder straps can be adjusted according to your height. Hand warmer pocket is equipped with 8 bullet holders on the outside. Inner zippered pocket protects your personal belongings from getting wet..
  • Multiple Use: Camo fishing waders with boots can trap and hold body heat to protect you from extremely cold weather while hunting, fishing, camping, farming, or riding ATVs, etc..
Check Stock

Eagle 60 Gallon Steel Flammable Liquid Storage Cabinet, 2 Shelves, 2 Manual Closing Doors, Yellow, 1962X

  • Flammable storage cabinets have reinforced 18-gauge steel double wall internal and external welded construction with 1-1/2 in air space on sides, top, bottom, back, and doors. Four adjustable galvanized leveling legs and ground connection keep this cabinet in place.
  • The patented safety shelving has adjustable galvanized steel shelves that direct spills to the back and bottom of the leakproof sump and hold 350 lbs. UDL and has 3 in centers for shelf brackets.
  • Fire resistant cabinet has a lead-free, high-gloss, baked-on powder finish with trilingual warning labels, a 2 in. raised leakproof door sill, and two 2 in. internal vents with fire baffles and caps.
  • Our cabinets have fail-safe doors and are available in manual close (180° opening) or self-closing doors (135° opening) that are self-latching with three-point stainless steel bullet latching system, piano hinges, and a flush-mounted door handle with key lock.
  • Cabinets meets FM-Approved NFPA Code 30 and OSHA compliance requirements.
Check Stock

J-B Weld 8272 MarineWeld Marine Epoxy - 2 oz.

  • J-B WELD MARINEWELD: A two-part epoxy cold weld system that provides strong, lasting repairs to multiple surfaces. Perfect for all DIY marine and watercraft repairs..
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 16-24 hours to cure. Once cured J-B Weld MarineWeld can be tapped, filled, sanded, molded and drilled. J-B Weld MarineWeld’s set and cure color is dark grey..
  • VERSATILE AND DEPENDABLE: J-B Weld MarineWeld is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, MarineWeld is waterproof and resistant to petroleum, chemical and acid. It retains strength above & below water..
  • SURFACE APPLICATIONS: Aluminum, Fiberglass, Metal, Plastic/Composite, Wood..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

Plast-aid Multipurpose Repair Plastic - 6 oz Kit

  • J-B WELD MARINEWELD: A two-part epoxy cold weld system that provides strong, lasting repairs to multiple surfaces. Perfect for all DIY marine and....
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 16-24 hours to cure. Once cured J-B Weld MarineWeld can be....
  • VERSATILE AND DEPENDABLE: J-B Weld MarineWeld is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees....
  • SURFACE APPLICATIONS: Aluminum, Fiberglass, Metal, Plastic/Composite, Wood..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld....
Check Stock

J-B Weld 50101 MinuteWeld Instant-Setting Epoxy Syringe - Dries Clear - 25ml 2

  • J-B WELD ORIGINAL PRO SIZE: Professional 5 OZ Tubes of the Original Cold Weld two-part epoxy system that was designed as an alternative to torch....
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured J-B Weld Original can be....
  • VERSATILE AND DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees....
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld....
Check Stock

J-B Weld Plastic Bonder Black 25ml Syringe - 2 Pack (50139-2), 25 ml - 2 Pack

  • J-B Weld Plasticbonder (Black): A Quick Setting And Multipurpose Two Part Urethane Adhesive & Gap Filling System That Provides A Strong And Lasting Bond To Many Plastic Surfaces J-B Weld Plasticbonder Is Great For Diy Plastic Repairs, Filling Dents, Bumper Repairs And More. J-B Weld Plasticbonder comes in Syringe allowing for a 1: 1 Mix Ratio. The Unique Syringe Has A Re-Sealable Cap That Prevents Drying Out And Leaking, Allowing For Multiple Uses.
  • Cure And Set Time: After Mixing The Two Part Formula With The Included Mixing Tray And Stir Stick, Plasticbonder Takes 15 Minutes To Set And 30 Hours To Cure J-B Weld Plasticbonder Set And Cure Color Is Black..
  • Strength: J-B Weld Plasticbonder Has Tensile Strength Of 3770 PSI..
  • Surface Applications: Thermoset & Carbon Fiber Composites, Thermoplastics And Coated Metals, Plastic & Pvc, Concrete, Ceramic & Tile, Fiberglass, And Aluminum.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, ....
Check Stock

PC Products PC-7 Epoxy Adhesive Paste, Two-Part Heavy Duty, 2oz in Two Jars, Charcoal Gray 27776

  • J-B WELD MINUTEWELD: A stronger and more permanent substitute to Super Glue J-B Weld MinuteWeld is an instant setting two part epoxy that will set in 1 minute under most temperature conditions J-B Weld MinuteWeld comes in a syringe allowing for an easy 1: 1 mix ratio The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses.
  • CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, MinuteWeld takes 1 minute to set and 1 hour to cure J-B Weld MinuteWeld set and cure color is clear.
  • STRENGTH: J-B Weld MinuteWeld has tensile strength of 2300 PSI.
  • SURFACE APPLICATIONS: Ceramic & Tile, Fiberglass, Plastic & PVC, Wood, Concrete, and Glass.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld Our heavy duty epoxy and adhesives repair & restore it right the first time J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
Check Stock