Best Weld on Stake Pockets

GSM Brands Dog Stake Cable Tie Out Heavy Steel for Outdoor Use [ 8mm x 16 ]

  • STURDY STAKE: 8mm thick steel stake is 16" tall..
  • SAFE DESIGN: Our stake features a 360 degree swivel ring to accommodate your dog cable (cable not included). The swivel feature ensures your dog's....
  • DURABLE: Chrome stake is weather resistant. Our stake will last year after year, through rain and hot sun..
  • CONVENIENT: Our stake is easy to carry with you on dog friendly road trips, dog parks or family gatherings..
  • MAKES A GREAT GIFT: For new and seasoned pet owners alike, our stake makes a practical, thoughtful gift!.
Check Stock

Mounting Bungs and Plugs Stainless Steel M18 x 1.5 Thread Notched Style Exhaust Weld in Bung with Gaskets 2 Sets

  • The mounting bung is made of stainless steel, easy to weld on exhaust, headers, down pipes, etc..
  • Install the weld bungs to replace or add sensor ports to any OEM or aftermarket exhaust or downpipe. Drill a hole and weld the mounting bung on..
  • The bung cap can be used to seal sensor bungs that are not being used in the exhaust system. The gasket helps create a tight seal to prevent any....
  • The M18*1.5 bung features a notched style, making it easy to weld by having the curve sit against the rounded surface of the exhaust or downpipe..
  • The weld in bung and plug set features a straight thread size of M18*1.5 mm, which is suitable for most vehicles..
Check Stock

MAXXHAUL 50257 Truck Bed Steel Adjustable Headache Rack

  • Commercial grade steel for heavy duty use..
  • Large 2" square powder coated steel tube. Welded 3/16" cold-rolled wire..
  • 2" wire screen provides full visibility..
  • No-drill bolt-on installation for tricks with stake pockets..
Check Stock

J-B Weld Original Epoxy, Steel Reinforced Epoxy, High Strength - 2 Pack, Dark Grey (8265S-2)

  • J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces. Perfect for DIY household, automotive, marine, craft repair and much more..
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey..
  • VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid..
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

J-B Weld Tabletop Epoxy Resin, 1 Gallon Kit, Cures Clear, Fast Cure Time, Minimal Bubbling, Scratch & Water Resistant

  • J-B WELD CLEARTOP: is a 1:1 mix ratio, crystal clear pour-on epoxy that provides a protective surface for all your projects. J-B Weld ClearTop is a self-leveling, high viscosity and solvent-free formula allowing for a safe, smooth and even finish on your project. J-B Weld ClearTop resist scratching, contact heat (up to 150oF) and impact! ClearTop can be mixed with dyes to add coloring to the Epoxy and be sanded after fully cured. The half gallon bottles have graduated marking on them to help make sure you measure even amount of Part A & B..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

IPS AAB4 Weld-On 1.25 oz Applicator Bottle with Needle

  • For use with Weld-on #3 and Weld-on #4 Acrylic Plastic Cement.
Check Stock

Beefoor Heavy Duty Steel Tent Stakes - Tarp Pegs Camping Stakes for Outdoor Camping Canopy and tarp 12 inch 8PC Pack

  • MULTI-USE: Tent stakes are suitable for nailing tents, canopies, tarps, and etc. to the ground. Perfect for outdoors camping and backpacking. Long and large tent stakes make sure your camping trip safe in the tents..
  • Stakes Size: The tent stake is 12 inches long and 2/5 inches in diameter which is much bigger and stronger than most stakes on the market..
  • EASY TO USE: Metal stopper and sharp tip make it easy to drive the stake into the ground and it is easy to pull out the stake using the hole and the hook on the top..
  • STURDY MATERIAL: Made of forged steel. Long and heavy enough to stand against the wind..
  • Tips for better use: - Please do not nail the tent stake vertically to the ground. - Make the tent stake and the ground into a 60-degree angle. - Please leave about 1.6 inches (4cm) of the tent stake on the ground to have enough room to tight the rope. - Use the hook to tight the rope. - Use the hole to pull out the tent stake..
Check Stock

Putco 89895 Locker Side Rails for Silverado/Sierra

  • Putco's traditional locker side rail design features unique cut-outs in each bed rail end providing innovative tie-down points.
  • Solid die cast construction on the bed rail ends allows for extreme tie down strength.
  • Easy no drill installation via stake pockets.
  • Stainless tubes are chromed to 44 hour CASS.
  • Tubes and rails are backed by Putco's NeveRust Lifetime Warranty.
Check Stock

Putco 49896 BOSS 2.5 Diameter Locker Side Rails for Silverado/Sierra

  • Oversized Locker Rail with 2.5 inch tubes and castings.
  • Solid die cast construction on the bed rail ends allows for extreme tie down strength.
  • Easy no drill installation via stake pockets.
  • Stainless tubes are chromed to 44 hour CASS.
  • Tubes and rails are backed by Putco's NeveRust Lifetime Warranty.
Check Stock

J-B Weld 8265S Original Cold-Weld Steel Reinforced Epoxy - 2 oz.

  • J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel. Perfect for DIY household, automotive, marine, craft repair and much more..
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey..
  • VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid..
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
  • Will set in 4-6 hours, and cure in 16-24 hours.
  • Waterproof, petroleum, chemical, and acid resistant when fully cured.
Check Stock