Best Weld on Tip

Exhaust Tip 3.00" Inlet Dual 3.00 X 9.50 Long Round Double Wall Polished Stainless Wesdon Exhaust Tip

  • Exhaust Tip 3.00" Inlet Dual 3.00" Outlets 9.50" long Slant 304 Stainless Steel.
  • Weld On Style fits a 3.00 Exhaust Pipe 3.00 inlet.
  • Bright Polished 304 Series Stainless Steel.
  • Dual Double Wall Slanted (Please measure to make sure it fits your Car or Truck) 3.00 Inlet.
Check Stock

J-B Weld 50151 WoodWeld Epoxy Syringe - Light Tan -.85 fl. oz.

  • J-B WELD WOODWELD: A quick setting and multipurpose two part epoxy that provides a strong and lasting bond on wood surfaces J-B Weld WoodWeld is perfect for DIY wood repair and wood projects by creating a bond stronger than wood J-B Weld WoodWeld now comes in a syringe allowing for an easy 1: 1 mix ratio The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses.
  • CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, WoodWeld takes 6 minutes to set and 1-3 hours to cure J-B Weld WoodWeld set and cure color is light tan.
  • STRENGTH: J-B Weld WoodWeld has tensile strength of 1800 PSI.
Check Stock

Mounting Bungs and Plugs Stainless Steel M18 x 1.5 Thread Notched Style Exhaust Weld in Bung with Gaskets 2 Sets

  • The mounting bung is made of stainless steel, easy to weld on exhaust, headers, down pipes, etc..
  • Install the weld bungs to replace or add sensor ports to any OEM or aftermarket exhaust or downpipe. Drill a hole and weld the mounting bung on..
  • The bung cap can be used to seal sensor bungs that are not being used in the exhaust system. The gasket helps create a tight seal to prevent any....
  • The M18*1.5 bung features a notched style, making it easy to weld by having the curve sit against the rounded surface of the exhaust or downpipe..
  • The weld in bung and plug set features a straight thread size of M18*1.5 mm, which is suitable for most vehicles..
Check Stock

Exhaust Tip 3.00' Inlet 4.00' Outlet 16.00' long Dual Slant Angle Stainless Steel WDWD304016-300-SS Wesdon Exhaust Tip

  • Exhaust Tip 3.00″ Inlet 4.00″ Outlet 16.00″ long Dual Slant.
  • Double Wall Slant Could be used as Left or Right Side.
  • Weld On Style fits a 3.00 Exhaust Pipe 3.00 Inlet.
  • (Please measure to make sure it fits your Car or Truck) fits a 3.00 Exhaust Pipe 3.00 Inlet.
Check Stock

Exhaust Tip 2.50' Inlet 4.00' Outlet 16.00' long Dual Slant Angle Stainless Steel WDWD304016-250-SS Wesdon Exhaust Tip

  • Exhaust Tip 2.50″ Inlet 4.00″ Outlet 16.00″ long Dual Slant.
  • Double Wall Slant Could be used as Left or Right Side.
  • Weld On Style fits a 2.50 Exhaust Pipe 2.50 Inlet.
  • (Please measure to make sure it fits your Car or Truck) fits a 2.50 Exhaust Pipe 2.50 Inlet.
Check Stock

J-B Weld Original Epoxy, Steel Reinforced Epoxy, High Strength - 2 Pack, Dark Grey (8265S-2)

  • J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces. Perfect for DIY household, automotive, marine, craft repair and much more..
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey..
  • VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid..
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

J-B Weld Tabletop Epoxy Resin, 1 Gallon Kit, Cures Clear, Fast Cure Time, Minimal Bubbling, Scratch & Water Resistant

  • J-B WELD CLEARTOP: is a 1:1 mix ratio, crystal clear pour-on epoxy that provides a protective surface for all your projects. J-B Weld ClearTop is a self-leveling, high viscosity and solvent-free formula allowing for a safe, smooth and even finish on your project. J-B Weld ClearTop resist scratching, contact heat (up to 150oF) and impact! ClearTop can be mixed with dyes to add coloring to the Epoxy and be sanded after fully cured. The half gallon bottles have graduated marking on them to help make sure you measure even amount of Part A & B..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

IPS AAB4 Weld-On 1.25 oz Applicator Bottle with Needle

  • For use with Weld-on #3 and Weld-on #4 Acrylic Plastic Cement.
Check Stock

TOAUTO Heavy Duty Cutting Torch, Oxygen Propane Acetylene Welding Torch Flame Torch Handle & Cutting Attachment with Propane Tip

  • 【HIGH PERFORMANCE】This cutting torch is mainly used to finish heavy duty work. With this kit to cut metal with thickness 1/8-inch to 5-inch and weld up to 3/8 inch, can easily finish the work ..
  • 【MULTIPLE GAS OPTIONS】 Cutting torch and handle are ready for multiple gas options.
  • Oxy-Acetylene, propane or other fuel. 2 fittings on the handle mix up oxygen and combustible gas through standard hose (inner Dia.6mm) to get cutting flame . The cutting nozzles may be different depends on the gas you are using.
  • 【HIGH QUALITY AND STABILITY】Adopts pure brass valve, stainless steel pressure handle, integrated adjustment handwheel and stainless steel stem to offer longer lifespan and higher precision . Built in non-return valve , more safety to use it ..
  • 【FULL SET】Full kit include torch handle, cutting torch, 1pc propane tip and 1pc acetylene tip （To meet different requirements) . Total assembled length 16inch (40mm), handle length 4.2 inch, which is very convenient to finish welding and cutting work..
  • 【WIDELY APPLICATION】Widely used in workshops, mechanical maintenance, cutting metal and welding ..
Check Stock

Dual Exhaust Tip 2.1 inch Inlet,Universal Exhaust Tip Tailpipe Fits for Mercedes-Benz W204 C63 W203 W211 AMG Style Weld On 304 Stainless Steel Polished Fit 2.1 Inch Pipes Diameter 10 " Length

  • Overall Length: 10 inch. ( Fit all cars that tailpipe outlet diamater is 2 1/2 inch).
  • Material-Mirror Polished T304 Stainless steel.Durable and Anti-corrosive,never Rusty..
  • Design-Weld On installation and Angled Cut - Rolled Edge.
  • Wide Application-Universal fits 2.5 inch Inlet Fitment on Most Cars, Sedans, and Trucks.
  • NOTICE:Please Measure The Outlet Diameter Of Your Pipe Prior To Purchase Of This Exhaust Tip And It Should Not Be Larger Than The Inlet Diameter Of The Exhaust Tip (2.5 Inches)..
Check Stock