Size and Number of Pieces: 1/4" 10pcs 3/8" 10pcs 1/2" 10pcs Tube OD.
Working Pressure Range: Maximum up to 150PSl. Working Temperature Range: '-40℉ to +200℉(-40℃ to +93℃).
Applications: Used with SAE J844 Type A and Type B nylon tubing in air brake system, or in cab air controls, except for where temperature is under -40℉(-40℃) or above +200℉(+93℃)or where battery acid can drip on tubing..
Advantages: Meet D.O.T.FMVSS 571.106 air brake specifications. Meet functional requirements of the SAE 246 & SAE J1131. Machined from CA360 brass. Easy to assemble (no tube preparation or flaring required.) Built in tube support. Can be used with copper tubing by NTA body with long nut and spherical sleeve. Insert should be removed.
Assembly Instructions: 1. Cut tubing as flat as you can. Maximum 15°angle is allowed. 2.Check the port of the mating part free of burrs or debris. 3.Slide sleeve and then nut on the tubing. 4. Insert the preassembled fitting into the tubing and the tubing should be bottomed to the seat of the fitting. 5. Tighten the nut by wrench until one thread remains visible of the fitting body..
Zone Tech Trailer Hitch Receiver Tube Extender (1 Pack)
► CONVENIENT - The Zone Tech hitch tube extender provides added clearance for a trailer or hitch-mounted accessory. Extends to 7", ideal embellishments for hitch mount bicycle rack to clear extra tire..
► CAPACITY - The Zone Tech hitch tube extender has a capacity of 3500 lbs GTW / 350lbs TW, for most bike rack and cargo carriers..
► PREMIUM QUALITY - The Zone Tech hitch tube extender is made durable high quality heavy solid steel through mechanically welded for predominant quality. With top notch equipment fittings and finished in dark powder coating for more durable conditions and free from dust and corrosion..
► SAFE - The Zone Tech hitch tube extender is guaranteed safe as long as you stay within th limits specified. Hitch tightener are highly suggested for tight fit and noise reduce..
► EASY INSTALLATION - The Zone Tech hitch tube extender are simply receiver tubes that is inserted into your trailer hitch to add a certain amount of clearance for your vehicle's bumper or spare tire mounted on the back..
FRONT TUBE DOORS: Fully welded for rugged, rattle-free performance whether you are on or off-road. Each door comes fully assembled with a secure paddle latching mechanism & factory-style hinge pins for a fast & easy installation.
OFF-ROAD TUBE DOORS: Tube Doors are constructed from 1.5" mandrel bent steel tube that is E-Coated & then textured powder coated for a long lasting finish while adding a classic off-road element to your Jeep. Re-use your factory mirrors if desired.
OFFROAD ACCESSORIES: Get serious about off-roading with a variety of tow hooks, hitches & kits that give yourself a way out in sticky situations. We offer winches, recovery gear, tube doors, mirror kits & more accessories..
RUGGED RIDGE JEEP PARTS: Count on Rugged Ridge to provide you with proven Jeep parts & accessories like bumpers, lift kits, wheels, interior accessories, floor liners & more for varying Jeep models.
Yeswelder Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld
Wide Application：Has CGA - 580 Tank fitting so it will screw right into the Argon, Argon/CO2Tanks. Ideal choice for MIG TIG welding, chemical and electronics industry.
Accurate Gas Flow Gague：The Square flow tube reads from 0 - 60 CFH, which is indicated by a ball which moves up and down in the flow tube.And has large 1 1/2" diameter pressure gauge which reads from 0 - 4000 PSI. Easy to read, accurate.
Multiple Outlet：Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. It also comes with a standard 1/4" barbed fitting.
Design：Combination of regulator and flow meter.
Two Connection Ways：You can choose the connection method according to your needs.
The Trailer Parts Outlet 3500 lb Light Duty Single Trailer Axle Kit with Suspension - Leaf Springs Hanger & U-Bolt kit 89 Hubface - 74 Spring Center 6 4 Frame 5x4.5 Bolt Pattern
All-in-One Bundle: This 3.5K LD Single Axle trailer kit includes everything you need for a quick and easy installation, such as a 3.5k Idler Axle, double eye hanger kit, 4-Leaf Double Eye Springs, and 2 1.75k U-Bolt Kits.
High Strength Construction - The high strength steel axle tube construction ensures a durable and long-lasting performance for small utility trailers, cargo trailers, ATV trailers, and more.
High-Quality Parts - Made with OEM grade trailer axles and suspension, this kit is packed with high-temp axle grease for reliable performance.
Low Ride Height - With an underslung design, the axle is welded with spring seats on the bottom, allowing for a lower ride height and improved stability.
EZ Lube Design - Removable rubber plug allows for easy access to a grease-able zerk fitting, allowing you to grease your axle without having to remove the entire hub.
The Trailer Parts Outlet 3500 lb Light Duty Single Trailer Axle Kit with Suspension - Leaf Springs Hanger & U-Bolt kit 73 Hubface - 58 Spring Center 5 0 Frame 5x4.5 Bolt Pattern
All-in-One Bundle: This 3.5K LD Single Axle trailer kit includes everything you need for a quick and easy installation, such as a 3.5k Idler Axle, double eye hanger kit, 4-Leaf Double Eye Springs, and 2 1.75k U-Bolt Kits.
High Strength Construction - The high strength steel axle tube construction ensures a durable and long-lasting performance for small utility trailers, cargo trailers, ATV trailers, and more.
High-Quality Parts - Made with OEM grade trailer axles and suspension, this kit is packed with high-temp axle grease for reliable performance.
Low Ride Height - With an underslung design, the axle is welded with spring seats on the bottom, allowing for a lower ride height and improved stability.
EZ Lube Design - Removable rubber plug allows for easy access to a grease-able zerk fitting, allowing you to grease your axle without having to remove the entire hub.
Frienda 12 Pieces 3/8 Inch-24 Threads Brake Line Fittings Assortment for 3/16 Inch Tube (4 Unions, 8 Nuts)
Fit for: the unions measures approx. 0.6 x 0.9 inch, the nut measures approx. 0.67 x 3/8 inch, fit for most common inverted flare or double flare sizes for 3/16 inch tube, for use with 3/16 inch steel, poly coated or copper brake lines.
Please confirm the size of the details according to the picture before purchasing.
Size and material: both the unions and nuts are metric 3/8-24 threads (regular 3/16 inch tube fitting size), all brake line fittings are made of quality brass to prevent rust and plated for corrosion resistance.
You will get: 12 pieces brake line fittings in the package, include 4 pieces unions and 8 pieces nuts, you can share them with your family and friends, these tubes unions are good fittings.
Inverted flare union: these unions are a nice option to join 2 (3/16 inch) brake lines together.
Brake line fitting connect: the nut is called the fitting for 3/16 inch tube, these unions fittings have a hex size of 3/8 inch and the threads are 3/8 inch with a thread pitch of 24.
